Showing posts with label refrigerated trailers. Show all posts
Showing posts with label refrigerated trailers. Show all posts

Monday, October 13, 2014

Danby DFF261BSLDB: 9.20 cu. ft. Bottom Mount Refrigerator

Danby DFF261BSLDB: 9.20 cu. ft. Bottom Mount Refrigerator
  • 9.2 cu. ft. (261 litre) capacity Bottom Mount Refrigerator
  • Recessed pocket style handles
  • Dual vegetable crisper drawers with glass covers
  • 3 integrated door shelves
  • Interior LED light illuminates without the heat of an incandescent bulb

I bought this fridge one year ago, The "sealed system" had a leak and is unrepairable, as the coils are inside the sides. After buying a Whirlpool to replace it, I have to warn everyone not to buy Danby products! Go to Consumer Affairs and sites like that to get the truth about Danby.

I thought the stainless like fridge was cute, perfect for my broken spine with the bottom freezer and good on energy. It is junk made in China! I think we all expect a refrigerator to last longer than a year, but not Danby..Their customer service manager Laura just rubs salt in your wounds, if you ask for a solution! They should not be allowed to manufacture appliances that are so poorly made. It doesn't use much energy, but I didn't even come close to saving the $550. put in to the the worthless toy. Not to mention all the stress of the noises, smells and loss of food!! So beware unless you want to go through a big nightmare annually!

Monday, August 25, 2014

Whirlpool 2262185 Start Relay for Refrigerator

Whirlpool 2262185 Start Relay for RefrigeratorBuying this saved me from buying a new fridge. If you hear a clicking noise every few minutes it could very well be your Relay. Find the relay in the back and pull it out, if it rattles when you shake it its bad and you might as well try this out to see if it saves you too

Took me an evening to go thru the refrig... start relay. Ugh.

Easy to get to. Easy to change. Diagnosis took longer than the fix.

Been working for a few months now, no problem.

Old one was toast totally burnt inside. I guess that happens.

Vendor shipped quickly... only a few days wait to cold 'fridge again.

Fortunately, I had a back up refrig here, so things were not all that bad.....

AND... I got to clean all the dust bunnies out of the one that was broken. A good thing!~

Buy Whirlpool 2262185 Start Relay for Refrigerator Now

If you landed here looking for something to jumpstart the compressor on your Kenmore 106 model, you don't want to order this part. Get the Whirlpool 2319792 Start Device instead.

Read Best Reviews of Whirlpool 2262185 Start Relay for Refrigerator Here

I was able to repair the appliance without purchasing a universal repair kit that cost $90.00. Now all is good Thanks again!

Want Whirlpool 2262185 Start Relay for Refrigerator Discount?

The part is re-designed from the original... required dremeling edge of proper terminal to fit existing connectors.

Less than an hour later, freezer is ~ 28F... and compressor seems pretty happy (did not run at-all on "universal" part supplied by local parts house).

Very happy outside no instructions & does not fit in old housing. (Will need to find new housing for proper fire protection).

Save 52% Off

Friday, August 15, 2014

Whirlpool W10276348 Glass Shelf for Refrigerator

Whirlpool W10276348 Glass Shelf for RefrigeratorThe shelf if fine but the need to replace it and the high cost was the problem. I assume that I will need to replace it in a few years too. The quality of Whirlpool (and all the other brands) has suffered so much in the last few years. The old products we replaced (refrigerator, dish washer, range, microwave etc.) were so much better the new products that replaced them.

My shelf in my fridge broke due to too much weight. This replacement came and works great as if it where the original. I just wish it was not so expensive just for a glass shelf. There is really not much to dislike about this product since it works, its great.

Buy Whirlpool W10276348 Glass Shelf for Refrigerator Now

I ordered this shelf to replace the one in my refrigerator that was broken. It was more expensive than I thought it would be but was the only one I could find. When the shelf came a few days later to my dismay it was not an exact fit. The drawer that is supposed to attach to this shelf will not attach as the shelf is a tad bit too small. It looks exactly the same as the one that was broken but is maybe half an inch smaller.

Read Best Reviews of Whirlpool W10276348 Glass Shelf for Refrigerator Here

I purchased this extra shelf for my refrigerator-freezer in order to expand its capacity for party cooking. It arrived promptly and was an exact fit. You cannot tell it from the shelves that came with the unit. If I find that I need temporarily to store an extra-tall item, I can remove it.

Want Whirlpool W10276348 Glass Shelf for Refrigerator Discount?

Whirlpool Refrigerator Light Switch 1118894

Whirlpool Refrigerator Light Switch 1118894My refrigerator is at least 25 years old. A couple of years ago I check on the price from a local applance parts shop. They wanted $ 42.00 for the switch. I said no. Just reciently I looked on line and found it for just under $ 7.00 including shipping. Had a little problem removing the old switch, but the new one snapped in place and now we have light in the refrig. My wife is happy!!!!!

Getting the part number on line to order this part was very difficult. If I did not have a background in reading blueprints and schematics, I probably would not had been able to figure out which part number this was. Then I had to compare the part from the refrigerator (which meant I had to remove the broken part from the refrigerator before getting the new part, not an easy task) and compare the part on line to 'hopefully' order the correct part, which I did. Ordering and receiving the part was easy.

I would (help &) recommend this to a friend.

Buy Whirlpool Refrigerator Light Switch 1118894 Now

Was so tired of a dark refrigerator so went on the internet to try and fine a switch, I found out how to get the old one out and the new one works great.

Read Best Reviews of Whirlpool Refrigerator Light Switch 1118894 Here

Arrived quickly, plugged and snapped into my 37-year-old Whirlpool Mark Series refrigerator in seconds and works as advertised. What's not to like?

Want Whirlpool Refrigerator Light Switch 1118894 Discount?

No issues with the switch so far. it appears to be a fine product. working as intended. Materials and mechanisms and electrical qualities are all good so far. Have had it for a few months and still working. Good value.

Save 15% Off

Monday, August 4, 2014

Aqua-Pure AP117 Premium Chlorine Filter (Single Filter) AP-117

Aqua-Pure AP117 Premium Chlorine Filter AP-117This is, in my opinion, one of the finest basic chlorine filters and screens on the residential market. I have used Aqua-Pure filters (Both Models# AP110 and AP117) for well over 22 years in our 63 year old house. 3M Company now owns the Aqua-Pure (a.k.a "Cuno") brand and appears to be continuing to manufacture these filters with the same commitment to quality and reliability as before. I use an Aqua-Pure AP110 basic sediment pre-filter mated to the Aqua-Pure AP117 Chlorine Filter under our kitchen sink to provide filtered drinking water. Although the manufacturer recommends replacing both filters every 3 months, I have found that if you are using this simply to provide non-chlorinated drinking water in one location of your house or apartment, you can easily expect to get 2-3 years before you begin to detect chlorine. This is assuming that you are on a municipal water system, such as Aqua America as we are.

Suggestion #2: When you install the new cartridges, be sure to properly clean both canister housings using hot soapy water and then rinsing, especially if you notice algae (green sediment or slime) on the inside walls of each canister-This is no cause for alarm and caused by light entering the canisters. Note: If your canister housings are colored or tinted, you should not have any algae on your filters.

Suggestion #3: When replacing the canister(s), you must also lubricate the rubber "o" rings or gaskets again, using some petroleum jelly or silicone grease before you replace the canister housing(s) back to your unit-if not it may leak.

The results? Great tasting, clean water for pennies!

I can not believe that this filter was nowhere to be found in my area,thanks to Amazon I did find several sellers with this filter.The AP117 premium filter is a very good filter,i have been useing this brand for many years,it doe's deliever what it says, for clean clear filtered water,a great product,i have checked the major stores in my area,they all seem to sell the cheaper filters,thanks to Amazon and it's sellers these products seem to be the only place where you can find the better quality filters,a good price, and very good shipping,no damage,on time delivery,you just can't beat that for service.

Buy Aqua-Pure AP117 Premium Chlorine Filter (Single Filter) AP-117 Now

Same filter is almost double the price at most hardward stores

product is identical

have a few customers with this product and each year I order on line

Read Best Reviews of Aqua-Pure AP117 Premium Chlorine Filter (Single Filter) AP-117 Here

The item arrived quickly, was very easy to install and fit right into our water filtration system. Water tastes great!

Want Aqua-Pure AP117 Premium Chlorine Filter (Single Filter) AP-117 Discount?

They seem to be original and will change to my filter in few days but my prior experience from other local dealers for the item worked good.

Wednesday, July 23, 2014

Refrigerator Air Ionizer XJ-100

Refrigerator Air Ionizer XJ-100The photo here is misleading. This is a generic ionizer, not an Oreck. It is a copy-cat. It seems to work alright, but if you are expecting a genuine Oreck, that is not what you will receive.

And as a side note, after I submitted this review, the seller changed the photo to reflect a non-Oreck model.

Saturday, June 28, 2014

Mueller/ B&K 416650 1/8"OD x 50´ Refrigerator Tubing

Mueller/ B&K 416650 1/8'OD x 50ยด Refrigerator TubingWas not exactly what I wanted however, it was in PERFECT condition otherwise. They worked very hard to assist me in returning the product. WILL DEFINITELY buy from again

THANKS

Product came quickly. Everything is perfect and I got a really really great deal. Love it!

Buy Mueller/ B&K 416650 1/8"OD x 50´ Refrigerator Tubing Now

Wednesday, May 21, 2014

Amana 25 cu. ft. French Door Refrigerator, AFF2534FEW, White

Amana 25 cu. ft. French Door Refrigerator, AFF2534FEW, White
  • 24.8 Cu. Ft. Total Capacity
  • Temperature Controlled Chef's Pantry Drawer
  • Temp Assure Freshness Controls
  • Two Humidity Controlled Garden Fresh Crisper Drawers
  • Gallon Door Storage

I purchased this model in 2007, worked fine until 3 days ago when we heard a gurgling noise. Does not cool, thought it was compressor. Service man says compressor is fine, but recommends optional replacement of the compressor while he's in there since he says the compressor outage is a common problem on these, but, the problem is a manufacturer defect by the builder in the copper tube, unseen by the consumer, a small pin slow leak until the pressure forced it to open and drain. Upon contacted customer service and requested the company reconsider as a one time exception to repair the defective unit. I was told no and that any written correspondence may only be sent to customer service via mail to Jim Packard, customer service supervisor at the headquarters in Benton Harbor Michigan.

So here is a heads up for anyone considering buying Amana, Maytag, Whirlpool. This unit has a 1 year warranty, something to consider for your next fridge. I think I will look at Japanese and other refrigerator manufacturers with our bad luck on this beautiful Amana fridge that is broke down!

Tuesday, April 1, 2014

Refrigerator Liners - 2 Count

Refrigerator Liners - 2 CountThese are wonderful for shelves that are racks instead of glass. It keeps spills on the liner thus keeping your refrigerator cleaner with less maintenance.Take the liner out and clean it off.

These were a little wide for my side by side fridge/freezer. They are easily cut to size. Just cut down the middle and shave some off there, so it won't hurt the looks of the border. They look very nice in my fridge, and are so easy to clean up. Much easier than scrubbing the shelves!

Buy Refrigerator Liners - 2 Count Now

These two refrigerator liners arrived full of tares. The actual substance of the liner is probably o.k. but both of them were ruined by the tares and cracks. I reported this to Amazon and Amazon refunded my money.

Since the liners were better than nothing, I put them to use in my fridge. They are of nice design...but those rips just ruined the day!

Read Best Reviews of Refrigerator Liners - 2 Count Here

Friday, February 28, 2014

NewAir AW-322ED 32 Bottle Dual Zone Wine Cooler with Mirrored Finish

NewAir AW-322ED 32 Bottle Dual Zone Wine Cooler with Mirrored Finish
  • Model: - AW-322ED
  • Product_Type: - 32 Bottle Wine Cooler
  • Product_Dimensions: - 20.10"L x 15.70"W x 33.40"H
  • Product_Weight: - 56.90 lbs.
  • Product_Color: - Silver

So far, so good. This cooler keeps the temp just right for storing white and red wines. If you are storing extra tall bottles or outsized champagne bottles, look elsewhere. The only minor issue is that it's a little noisy. But we've grown accustomed to the hum and it's not a problem. I read a number of reviews before settling on this unit so there really wasn't too many surprises.

Wednesday, January 22, 2014

GE WR60X10141 Refrigerator Evaporator Fan Motor Assembly, 1/8 X 2-1/2 Inch, 115V, 3 watts

GE WR60X10141 Refrigerator Evaporator Fan Motor Assembly, 1/8 X 2-1/2 Inch, 115V, 3 wattsI had purchased my GE refrigerator only a few years before. Last year in the fall the freezer evaporator fan would intermittently make a very loud vibrating noise when it turned on to circulate the cold air from the freezer to the rest of the refrigerator. The freezer and refrigerator seemed to be keeping their respective cold temperatures but I knew the loud vibrating noise couldn't be a good thing for the long run. I did an internet search for my model number. There were a few YouTube videos that showed how some models of GE and other refrigerators would get ice build up and how that could cause this fan noise problem. I moved everything from the freezer and placed it in the refrigerator and I unplugged the power from the entire refrigerator.

I used the YouTube video for reference. It took a few minutes to disassemble the parts in the freezer area so I could reach the fan. It didn't appear that I had an ice buildup problem but I decided to let the existing frost to melt while I took a look at the fan. I removed the fan mount assembly and there didn't seem to be anything wrong with the fan motor at the time but I suspected it might need a little oil on the bushing/bearing. I also suspected that the evaporator fan motor might need to be replaced because of bushings/bearings that had worn loose. Before deciding to buy and replace the entire evaporator motor I wanted to see if the bushing was simply freezing up and needed lubricant. I put a few drops of Teflon based oil on the fan motor spindle and let it soak into the bushing/bearing area.

After about twenty minutes of letting the freezer defrost I reassembled the fan motor with its mount and the rest of the items back into the freezer. I plugged the freezer power back into the electrical socket and the refrigerator turned on. I didn't hear any excessively loud noise but the loud sound from the evaporator fan had been intermittent before so I waited and listened. It seemed as though my effort had mostly solved the problem of the fan noise...kind of. The fan would still not sound right at times but it make the noise as frequently nor as loud as it had been before.

The noise from the fan in the freezer had improved but it still was a little noisy at times. This continued for six months until the late spring and early summer this year when the freezer fan condenser motor started sounding extremely loud again. After some searching and cross checking to make sure I had the right GE (Hotpoint, etc.) fan motor part I looked here on Amazon and ended up purchasing this exact evaporator motor part WR60X10141. The fan evaporator fan motor was shipped the next day from the seller and I received it very promptly just a few days later. During this time my original evaporator fan motor would continue to cycle from a little noisy to very noisy and back to a little noisy.

A week after receiving the new fan evaporator motor part that I purchased on Amazon I decided it was time to change it out. Just for good measure I put two drops of Teflon oil on the lower part of the motor spindle at bushing and let it soak into the bushing/bearing. I repeated the procedure to disassemble the items in the freezer area. I moved the food in the freezer, unplugged the refrigerator and followed the YouTube instruction video. This time I had to remove the fan blade and disassemble the fan motor housing to replace the old fan motor with the new one. There are two rubber motor mounts that hold the motor and absorb any vibration while the fan spins. These rubber motor mounts can be replaced but mine seemed to be in good condition. Just for good measure because the front motor mount had probably been worked a lot from the vibration of the previous motor I decided to swap these rubber motor mounts by moving the back mount to the front and front mount to the back of the motor.

Before you replace the old motor with the new one and before you remove the fan from the motor spindle you should take notice of the fan's positioning on the metal motor spindle and how far the spindle sticks out from the fan when the fan is mounted on it. It will help with this next tip. During reassembly I decided to slide the fan blade slightly father back (between a sixteenth of an inch to an eight of any inch) more than it had been mounted before I removed the fan. This would give the fan a bit more room away from the metal evaporator cover and fan vent hole in front of it. I left about a quarter inch or slightly more of the metal fan motor spindle exposed in front of the fan blade part itself which was just a slight bit more space than it had before.

I suspected that when the fan had made the noise before that it might have been hitting the hole in that metal cover that it blows air through. Moving the fan slightly farther back on the motor spindle also seated the fan itself a little closer to the fan motor mount (and closer in distance to the fan motor) which according to basic physics should make the entire assembly a little more stable and have less tendency to want to wobble and wear out the motor bushing/bearing. For those who replace this part and watch the YouTube video beforehand you will understand why I am recommending this slight adjustment from how the fan was originally placed on the metal motor spindle. This adjustment is simple but don't push the fan too far back or it will be too far from the hole for the fan and the fan could strike the motor mount assembly itself. When you push the fan back onto the spindle just make it a little bit farther back (between 1/16th to 1/8th of an inch) towards the motor than it was before your removed it.

Conclusion: This is a fairly easy project to do. If you suspect your noisy evaporator fan motor needs to be replaced make sure you have the right fan motor part number for your model of refrigerator. During my online search I noticed that many different sellers are selling this same part for similar GE and Hotpoint models. You can pay up to eighty dollars for this part through major online vendors. Some are certified GE parts that cost the seller more money and I suspect may just be the exact same motor replacement part manufactured in China. While it may be identical the official GE part might be mandated for their own warranty repairs or it is possible that GE may or may not do additional quality testing on the motor before they put the exact same motor in an official GE box. My part came in a simple little brown box and this much less expensive costing replacement motor (at time of purchase less than $25) that I received from the advertised seller SupplyEdge was brand new and looked absolutely identical to the motor that it replaced and that included the WR60X10141 model number and etched markings on the back. The Amazon vendors by far seemed to have the best prices for this evaporator motor and just as it was my experience the other most of the other Amazon reviewers said the part was shipped and received promptly. I recommend this product as an excellent replacement part. I would also recommend that everyone follows the YouTube instruction video for reference. Simply do a search for "GE refrigerator evaporator fan motor replacement" or "GE refrigerator fan noise".

Motor was exactly just like what was on the Fridge. Easy to remove and reinstall.

You tube has a great Video if you need to know how to do it and are not that handy..

Motor works just like the orig lets hope however it lasts longer than 4 years.

Buy GE WR60X10141 Refrigerator Evaporator Fan Motor Assembly, 1/8 X 2-1/2 Inch, 115V, 3 watts Now

Great price, and easy to install myself. I can buy several for the price of a service call, and spend less time on the install than I would waiting for the tech to show up.

Read Best Reviews of GE WR60X10141 Refrigerator Evaporator Fan Motor Assembly, 1/8 X 2-1/2 Inch, 115V, 3 watts Here

I installed it using a YouTube video as a guide. Uneventful. What else is there to say? It's a fan.

Want GE WR60X10141 Refrigerator Evaporator Fan Motor Assembly, 1/8 X 2-1/2 Inch, 115V, 3 watts Discount?

Shipping was super fast. Product was identical to the original replaced fan motor. The packaging could have been a little more padded I believe, as I was concerned about the shaft being susceptible to bending, but it was fine. Absolutely no wobble or imbalance after installation. Quiet as a mouse!

Save 57% Off

Sunday, December 29, 2013

Portable USB Beverage Fridge Coolar and Warmer 2-in-1 (Black) in Red Box

Portable USB Beverage Fridge Coolar and Warmer 2-in-1 in Red Box
  • Easy installation, no driver required, plug & play
  • Stylized as a mini fridge , 4-foot cable It looks cool on any desktop
  • Internal LED Light , red box
  • Powered by USB cable with a switch to a USB port located on your PC prior, no batteries required
  • Dimension: 19.5*8.3*9.4CM

The product cools the beverage by having a cold zone on the bottom. It doesn't keep the entire beverage cold but helps keep it cool. It is a little awkward to get the can in/out of the cooler but overall it's a neat concept and fits well on a desk next to my keyboard.

Buy Portable USB Beverage Fridge Coolar and Warmer 2-in-1 (Black) in Red Box Now

I bought this for myself and use it at work, I have even pinned it for others to see! Great doing business with you!

Read Best Reviews of Portable USB Beverage Fridge Coolar and Warmer 2-in-1 (Black) in Red Box Here

There is absolutely no insulation and is s tight fit for one soda can. I did not use because I was hoping it would fit my mug which is just a little bigger than a soda can. Price was too low to pay postage to return.

Thursday, December 26, 2013

Frigidaire 134144700 Spring Assembly

Frigidaire 134144700 Spring Assembly
  • SPRING ASSEMBLY, SUSPENSION, W/SLEEVES
  • Works with the following models: Frigidaire 970-C48112-10, Frigidaire BTF1240ES0
  • Frigidaire BTF1240ES1, Crosley CFW2000FW0, Frigidaire CFW2000FW2, Frigidaire CGA1M2WSTC

We had one of two springs break and both shock absorbers break on our Kenmore front-loading washing machine (8 years old). It came as quickly as they said it would, and it was almost half the price as the appliance parts store in town. I'm glad I found it!

Saturday, December 7, 2013

Vinotemp 32-Bottle Wine Cooler, Stainless/Black

Vinotemp 32-Bottle Wine Cooler, Stainless/Black
  • Front exhaust system allows for under counter or freestanding installation
  • Thermal pane glass door helps maintain the cooler's interior temperature
  • 6 metal shelves, interior blue LED light, and an external temperature control panel with digital display.
  • Easily level the unit with its adjustable feet
  • Temperature Range: 45-65F

In 2011, we purchased a Vinotemp wine cooler for our office. Within two months the control board failed. The unit was in warranty so it was replaced at Vinotemp's expense. One year later the control board failed again. At this point, the unit was out of warranty. We paid for a repair service (same service recommended by Vinotemp for first repair) to replace the part. The repair service was told the part was no longer available (we paid the service call). I contacted Vinotemp personally and was told the part was out of stock but the part was on back order from China. They originally had received the parts from China, but they were rejected because they did not have the correct voltage. We waited 6 weeks for the part to arrive at Vinotemp and then another 1-1/2 weeks to receive it in our office. During this time, Vinotemp did not contact me to update me on status. In every case, I had to call or email them to determine status on the part. After we received the part, we called the repair service to come and install it. Again, it was defective and again we paid a service call. I contacted Vinotemp to request that they supply us with a new part that worked and I asked that they assume responsibility for cost of the second repair which was required because they had supplied us with a defective part. After emails and phone calls over a four-week period, they notified me that they were sending the part (which they say they had tested), but they refused to pay for the repair costs. This small wine cooler has cost us $270 for repairs and parts. Costs to install another replacement part will be $216. At this point, it's not worth the cost to continue repairing this unit. Vinotemp obviously does not care about promoting good will among their customers and does not utilize reputable or reliable parts suppliers. Run, don't walk, away from Vinotemp!!!

Buy Vinotemp 32-Bottle Wine Cooler, Stainless/Black Now

We were attempting to replace our outdated trash compactor with a useful appliance when we purchased our first wine cooler, a Whynter product. That one failed to maintain temperature (actually would HEAT) after two weeks in place.

This Vinotemp was our second attempt at a wine cooler. We paid about $100 more thinking we were approaching a standard of quality we hadn't reached with the first one. Wrong.

Item arrived in perfect condition; no damage to packaging or the unit itself. I let the unit unit sit for 24+ hours per the instructions to allow any fluids to settle in the compressor then plugged it in the next day. The display did not work whatsoever; the wine cooler compressor fired up but, after about 30 minutes, had stopped and the cooler was doing nothing.

I scoured the Vinotemp website for troubleshooting tips (loose connector on display?) and their website was worthless. Instructions said "Unload the display" without any help or suggestion as to how to go about "unloading" the display. I called Vinotemp, reached voicemail, left a voicemail, and never received a call back.

After all this, I had to load this POS back into the packaging and set it in the driveway for return pickup.

Seller sent automated apologetic email suggesting sometimes items are damaged in shipment but this was not Fedex's fault. I blame Vinotemp.

Steer clear. Vinotemp is known for their "custom wine cellars" not these dinky wine coolers.

Wednesday, October 30, 2013

Frigidaire 240358005 Shelf for Refrigerator

Frigidaire 240358005 Shelf for RefrigeratorWhen I moved into my apartment, the freezer compartment in the refridgerator was mysteriously missing it's shelf, so I needed to buy a replacement.

My refrigerator is a FRT18KG3DW0, which isn't on the list given on the product page, but the shelf fitted perfectly.

Save 38% Off

Saturday, September 14, 2013

241642501 FRIDGE ICE MAKER KENMORE FRIGIDAIRE WESTINGHOUSE NEW OEM PART 11

241642501 FRIDGE ICE MAKER KENMORE FRIGIDAIRE WESTINGHOUSE NEW OEM PART 11
  • FRIGIDAIRE/KENMORE
  • REFRIGERATOR
  • ICE MAKER
  • 241642501
  • NEW OEM PART

This item is a direct OEM replacement. The only difference between the old one and this new one, is that the power cord is about 3-4 inches longer than the origional. It still plugs in fine but there is excess cord now. As for the functionality of the item, it works fine, no issues yet. Time to replace is about 15-30 min based on your skill set. The seller was quick and the piece was in hand shortly after placing the order, which was nice. It came in OEM packaging, not repack, so you can tell it was a new item. No issues with it or the seller, so I would purchase from them again if need to.

Tuesday, July 23, 2013

Aqua-Pure AP717 Drinking Water System Filter with Triple Action Filtration

Aqua-Pure AP717 Drinking Water System Filter with Triple Action FiltrationI put this in line with my Ice maker, using screw on tubing. I had to go out and by special ends, the ones that come with it is for platic or copper tubing only...Cubes taste good though, it is doing its job...

I purchased the Aqua-Pure AP717 to replace the Aqua-Pure AP717 filter attached to my refrigerator icemaker. The previous filter worked great so I expect the same from the replacement filter. I followed the installation instructions and had no problems with the installation.

Buy Aqua-Pure AP717 Drinking Water System Filter with Triple Action Filtration Now

We drink well water at our NC home in the mountains. This filter really freshens it up and makes it taste nice and crisp. YUM!

Read Best Reviews of Aqua-Pure AP717 Drinking Water System Filter with Triple Action Filtration Here

The filter performs as advertised but the install is more difficult than it should be. Install requires that you connect tubing to both ends using nuts. I've seen other filters that snap into a base that only needs to be connected to the coper tubing once and allow you to easily replace the cartridges with no tools. That sort of product is better in my opinion.

Want Aqua-Pure AP717 Drinking Water System Filter with Triple Action Filtration Discount?

I have an outside water connection to my refrigerator's ice maker. Three years ago I decided to install an Aqua-Pure AP717 filtration module between the connection to filter sediments from the water, and I can tell the difference in water quality. The AP717 usually needs to be replaced every six months, but it's well-worth the price and effort. I recommend this product.

Save 39% Off

Monday, July 8, 2013

LG 2.7 CF COMBO WASHER-DRYER WHITE

LG 2.7 CF COMBO WASHER-DRYER WHITE
  • 2.7 cu. ft. Capacity
  • 9 Wash Cycles
  • 6 Dry Cycles
  • 1300 RPM Spin Speed
  • LoDecibel Quiet Operation

(This review is for the Silver model that I own Amazon has not yet merged the reviews, so I'm cross-posting)

QUALITY

The build quality of this washer/dryer combo is inconsistent: On the plus side, the machine is heavy enough to stay put, and the drum feels so solid that you could wash bricks in it. Giving 10 years warranty on the motor is also a nice touch. On the other side, the entire front (including the secondary "glass" and shiny bezel around it) is made of plastic, the control panel gets hot (can't be good for the electronics), and I have observed kinks, such as a program starting in the middle maybe 1 out of 10 times, requiring an extra off/on.

THE WASHER

Frontloaders are only now making inroads in the US market, and if you believe "the internet", they are magical. I can confirm at least some of the claims in this specific incarnation: First, the washer is extremely frugal with all consumables involved: I'm down to 2 tablespoons of detergent and 1 of softener with no adverse effects; water is kept no higher than a puddle at all times, and the 1 hour cold cycle runs on a measly 0.1 kWh (or 3 cents for me). Second, the machine is easy on clothes: there are Delicate and Wool modes to give you an idea, plus I have successfully cleaned neoprene wetsuits (with special detergent), which are said to be shredded by agitators.

The major downside to the design is that the horizontal drum causes vibrations that many US homes cannot easily absorb. Consider my case, top floor of a pre-war walkup, woodbased building: even on medium spin speed, the contents of the fridge next to the machine would rattle loudly, and I only saw some relief after I bought Sorbothane Silent Feet. I'm fairly content now, but I still feel the machine should have better built-in vibration reduction, especially considering that LG is the company that showed off a washer operating on 4 glasses a few years ago!

THE DRYER

The dryer is the weaker part in this package. For starters, a full cycle runs for 4 hours (on top of the 1 hour wash), which makes this machine unsuitable for big family laundry days. There is no lint filter, so you'll have to pry things out of the seal afterwards, and one low-temp cycle eats up 1.5kWh (= $0.50), somewhat negating the overall efficiency advantage. And as if all that wasn't enough, I swear I see more wrinkles than before, with my Brooks Brothers "wrinkle free" shirts now coming out in MORE need of ironing than regular shirts!

Now all that said... if you can navigate around those issues (also see TIPS below), the advantage of the combo design begine to shine: all you have to do is drop in the dirties, set the timer, go to work, and come back to a readily washedanddried package! I've gotten used to doing this during the week, and found that I have more clean clothes available than before at any time, therefore donated some, AND gotten rid of my large dirtylaundry container! That was an unexpected triplewin in the space department for me, and worth the tradeoffs.

OPERATION

I find this machine easy enough to use, although there is room for improvement. Basically, you go from left to right: fill in the detergents, pick a cycle (cotton is the default), pick options (extra water, etc), select a dry mode, and press play. What irks me a little is that selections crossinterfere: for example, the machine may override your just-picked spin speed when you select a dry mode. Also, some drying combinations are missing: you can do time (30, 60, 120), dryness (damp, normal, extra), or "low temp", but no other permutations. For my wool pants or dive suits, a delicate wash cycle followed by 30 mins of lowtemp drying would have been perfect, but nope....

One nice feature worth mentioning: you can interrupt the program at any time, change any setting or open the door, and then resume. Even with the Extra Water option selected, nothing will pour out (like I said, frugal).

NOISE

This machine is specifically marketed as quiet, an important feature when you want to sell to urbanites who perhaps plan to sneak it into their apartment (usually forbidden) . And yes, the directdrive motor is a winner: all you get is a gentle hum at normal wash speeds. However, there are two problems (three if you count vibration, above):

The water inlet valves open/close/open/close/etc... up to six times each time water is added, and this triggered buildingwide "water hammer" events in my case. I used to think that this, too, was my building's fault, but I found that many people experience this with LG machines even in new construction. Thankfully, there is a solution to it: socalled "water hammer arresters" like this Sioux model help out a lot.

The pump that gets the water out is loud. That being a vague qualifier, I ended up measuring it (we've all got issues!): washing or drying registers around 60dB, but when the pump comes on, the sound level jumps to 70dB. For comparison, these numbers happen to be the range of human conversation: it's like someone speaking very softly (60 dB), then suddenly borderline shouting (70 dB). This keeps happening during the 4hour dry cycle as well, not just the washing.

TIPS

After a couple months of use, here are a few practical tips I'd like to pass on:

Use powder instead of liquid detergent. You'll be able to do a prewash this way as well as use the timer feature. The softeners is ok in liquid form and won't drip down.

To save on electricity and ease ironing, make sure you pick the fastest spin speed possible, then shorten the dry cycle. For business shirts or synthetics, I'm getting away with as little as 30 min drying time.

To run the dry cycle by itself: select "drain and spin" on the knob, set your dry option, then unselect the spin speed et voilà! you can dry your clothes some more or use Dryel sheets this way.

RECOMMENDATION

One the one hand, this is the best appliance I've ever purchased: spacesaving, efficient, and a heavenly luxury compared to the alternative which is an inconvenient and pricey "wash and fold". If you're in a similar situation, I predict you'll absolutely love this machine for what it does to your routine. On the other hand, there are some considerable flaws, mostly the noise level, slow drying, and the vibration issue. Overall, if you actually have the space for two machines, a separate washer / dryer would be the safer bet.

Buy LG 2.7 CF COMBO WASHER-DRYER WHITE Now

I actually have the model LG was selling before this one. The only difference is that this new one is 2.7 cu ft, while mine is 2.4.

I've had mine for a year now. We have a small apartment, and saving space is very important for us. We used to have a stackable washer/dryer, that worked fine, but took too much space. Also, out building would not allow us to make a hole in the building wall, so we had to open the window when we used the dryer, and stick the exhaust vent through the window.

When I learned about this lg machine, i was very skeptical. I read reviews that said it did not dry well, took to long to go through the cycle, wrinkled the cloth, vibrated too much, etc. Now after having this machine for a year, I can say I am quite happy. Just do your research and know the limitations of the machine and how to take care of it.

It uses condensation to dry, so do not load it fully, if you want to dry the cloth.

It needs HE detergent. So use HE, and use just a tiny bit less than a table spoon.

Clean the rubber gasket on the bottom remove the lint that assembles there.

If you do these simple things, it will dry cloth very well. So far, after a year of using it, I have not experienced any problems.

Also, if you do not load it fully, setting the dryer to dry for an hour will often be more than enough to dry your cloth. This way you can have your cloth washed and dried in 1.5 hours not too much worse than regular washer/dryer.

Also, for the first 2-3 weeks the mchine would take a long time to balance the load during spin cycle. After a few weeks it setlled and now balances very well.

Overall, if you have space, but regular washer and regular dryer. If space is limited, or you cannot have the dryer vent go through the wall, this machine will work fine.

Read Best Reviews of LG 2.7 CF COMBO WASHER-DRYER WHITE Here

I purchased my washer/dryer through Amazon over a month ago. After reading reviews, I was a little concerned about the wash/dry times. After using the unit I have found this to be a non issue. It is important to follow the instructions and I do not over load the unit when drying clothes. I have found it easiest to run the wash only cycle first, then remove the items I don't want to dry. I then turn on the dry cycle (you do this by turning on the unit, not selecting a wash cycle, choosing a dry cycle and turning off the spin cycle). The clothes may feel damp when I first remove them, but I find as I'm folding them that they are infact dry.

The unit is very quiet which is great as I live in a very small space.

One item to note is that drying sheets should not be used, as it hampers the sensor when drying.

It is very convenient when washing large loads (such as sheets, etc) to be able to set the wash/dry cycle at once and then remove the items dry. I used to forget items were in the washer and then have to re-wash them before I could move them to the dryer.

I find I have to wipe down the door seal, which collects most of the lint, between each load. I found the water/lint removal on the bottom a little tedious, but since you only have to clean it once a week it isn't too inconvenient. Nice not to have to deal with the dryer lint anymore.

The unit was shipped from Amazon right to my door. The installation was very easy as LG provides step by step instructions. I did have to live chat with LG support to figure out how to run the dry only cycle. They were very helpful.

Want LG 2.7 CF COMBO WASHER-DRYER WHITE Discount?

I've only ordered major appliances on-line twice, once from Home Depot, and once through Amazon.com. The Amazon.com order was executed without a hitch, the Home Depot order not so much. We are still hassling with Home Depot about getting a promised refund and gift card.

This unit installed and operates exactly as advertised. The only caveat is that these units take a while to dry completely, but that's a function of the drying technology used. For me, it was a reasonable trade-off for not having to install a vent.

We got this unit for my 88-year old Dad, who lives alone in a studio apartment 120 miles away from us. We basically just needed to tell him: don't put too many clothes in, turn on the water, put a tablespoon of detergent in this drawer, then press these two buttons. We decided to leave the clothes a little damp to avoid wrinkles, and he hangs the clothes (spaced out a bit in his closet) for final drying.

If you're looking for a simple, small-footprint solution that doesn't require a vent, and are willing to wait, this is the washer/dryer for you!

My family recently did a complete kitchen gut renovation and although the contractor purchased all the appliances directly, not through Amazon, we want to share our thoughts now that we have lived with them for almost 6 months. See our other reviews for the other products.

BACKGROUND

I saved this review until (almost) last because it is the most complex in several ways. I think when you consider washers and dryers you have to consider in what category you are trying to operate. Are you using it intensively like a commercial machine? Are you using it to the exclusion of other options? Or are you using it for small loads at most twice or three times a day? For us, it is the perfect solution because we live in an apartment, have limited space and have access to commercial machines in the basement (not to mention the 5 store-front cleaners in the neighborhood who will pick up, clean and deliver laundry). But we wanted an in-apartment solution for the babies' clothes and for emergency situations ("honey have you seen my white jeans? Oh no, they're dirty and I need them tonight..."). Our contractor did a great job designing the cabinetry around this. When it's not in use you would not even know we have it, and when it is in use we leave the cabinet doors open. They are louvered but for helping the heat escape we leave the doors open anyway. We also did not have the option to externally vent the dryer. I've experienced condenser dryers before and dreaded the outcome, but went for it anyway.

THE GOOD

Quiet in every stage except the spin.

It works. Given what you read in some of these reviews, that's no small feat.

It's reliable. After 6 months of use ~4 times per week it is going great.

It can be designed into a lower cabinet space and the cabinet height and depth are normal (leave a comment if you want pictures posted).

THE BAD

There is no obvious way to do just drying (see special notes).

The vibration in the spin cycle is astoundingly strong and loud, but yet necessary so that it pre-dries the clothes as much as possible.

Operations are confusing. It takes some time using it and reading the manual (and who likes doing that) to figure it out.

Unvented dryers are a pain. They are no better now than the older European ones I am familiar with (Bosch). Except that this one drains into the plumbing as opposed to having a reservoir that needs dumping. But they still take forever.

SPECIAL NOTES

1. To do just drying, select the Drain & Spin cycle, then set the Dry cycle you want, then hit the Spin Speed button once to de-select spinning. All you have left is the dryer.

2. To speed the drying cycle, open the machine occasionally during the dry, take the clothes out and put them back in and continue. Each time you do that can take about 15 minutes off the cycle time. Be careful because the steam and the clothes will be H.O.T. hot.

3. Get used to clothes coming out just a tiny bit damp. We find that the clothes are close enough to dry that they in fact dry on their own as we fold them. If you require completely dry clothes, don't get this unit or any other condenser dryer.

4. Remember to occasionally clean the filter. We've done it twice in 6 months and I suspect that is about the right frequency (eg once every 35-40 loads).

COMMENTS TO OTHER REVIEWS

1. "Takes forever": To all those who have said that the drying takes a long time, you are correct. If speed of drying is important, don't get this or any other condenser dryer. But this unit is for a certain type of use. It is not intended to be a replacement for commercial units. For that matter if you live in the 'burbs and have the space for larger, vented, separate machines, I don't know why you'd want this machine. But if you live in a tight space and your needs are limited to at most three loads a day (that's about 12 or more hours of usage), this machine is a GREAT supplement. Compact, functional and quiet are great tradeoffs for speed and throughput.

2. "Clothes are still damp at the end": Not really. If your expectation is that the clothes are 100% dry with not an ounce of moisture the moment they come out of the machine, I challenge you to consider whether the important thing is for the clothes to be dry the moment they come out of the machine or by the time they are folded. We find that we never once have put clothes away damp.

2a. Also, don't over-fill the unit. It's relatively small at 2.7 cubic feet. For comparative illustration, AJ Madison has 288 stand-alone dryers on their site, not a single one of which is smaller than 3.0 cubic feet. Overfill, and the clothes will come out damp on almost any unit.

In conclusion, we strongly support this machine if it fits your needs. I wish more manufacturers would compete in this space because I am sure that competition would compel LG to improve the few weak points, but until then this is a great option.

Saturday, June 29, 2013

Water Sentinel WSL-1 Replacement Water Filters, 4-PACK

Water Sentinel WSL-1 Replacement Water Filters, 4-PACK
  • The filters are protected with a red sanitary end cap which is designed to ensure your products arrive safe, sound and in perfect condition.
  • Each filter includes a 6 gram package of o-ring lubricant known as DOW 111.
  • The compatible replacement filters are designed to give you similar or better performance than the original version they replace.
  • These filters are guaranteed to fit by the manufacturer and will provide clean, clear, great tasting water for you and your entire family.

I have been using Water Sentinel cartridges in my LG refrigerator for more than a year now. I am very happy with the results. The cartridges last about six months in our household but we like to use the water dispenser in the door of the refrigerator. If you just have an ice maker, I would expect you to get much more time out of each cartridge.

One benefit to having a water dispenser is that you can see for yourself when the cartridge needs to be replaced. The water quality never looks worse but the flow really decreases. There is all this talk about replacing the filters on a fixed time schedule. This doesn't make much sense to me since it seems that what should matter is how much water has flowed through the filter and the quality of your water going in (the dirtier the water, the faster the filter gets used up).

The cartridges fit the refrigerator properly and they include a little packet of silicone jelly to apply to the two rubber gaskets on the neck of the filter. I have always used the silicone just to be safe and I have not had any problems with leaks (something that would be pretty serious considering that the water is under pressure and would flow until you noticed the problem).

I have been told that all filters, no matter what the brand, are all the same -they are simply a plastic casing filled with charcoal. So I'm not sure why generic filters like the Water Sentinel are not cheaper (why the four stars). How much could they cost to make? But compared to the name brand filter that came with my fridge, the Water Sentinel is a very good deal.

I have found that 4-packs of this product are where you will get your best price point. Buying one at time doesn't make much sense, especially when you factor in the shipping cost.

Buy Water Sentinel WSL-1 Replacement Water Filters, 4-PACK Now

No reason to pay the outlandish price that Sears wants for this filter! This 4-pack costs about the same as one filter from Sears, and works just as well.

Read Best Reviews of Water Sentinel WSL-1 Replacement Water Filters, 4-PACK Here

It is an excellent filter, the good care and delivery of them is very well. I installed it in my freezer and all is ok. I recomend they for all.

Want Water Sentinel WSL-1 Replacement Water Filters, 4-PACK Discount?

Good replacement filter without the high cost of the original replacement filters. Water flow seems to be slightly less through the Water Sentinel filter compared to the OEM LG filter.