Maytag MBF2258XEB 21.9 Cu. Ft. Black Bottom Freezer Refrigerator - Energy Star

• 5 Adjustable Spill-Catcher Glass Shelves
• Ice Maker
• Glide-Out Freezer Drawer
• Energy Star Qualified
• Electronic Temperature Controls

Did a lot of research on refrigerators before purchasing this item. Settled on a maytag because I heard bad things about the samsungs, and I figured Maytag has been making friges for a lot longer. From day 1, I have had problems. As soon as it arrived and I plugged it in, it started icing up the fridge part, even on the factory middle of the road settings. I called Maytag and they suggested I turn it down, so I did, then the freezer wasn't cold enough, so I turned it back up, and somehow that fixed the ice problem. Whatever. Then, 2.5 months into ownership, it quit cooling altogether, ruining all my food, and causing frozen dough to rise and make a mess in my freezer. Called Maytag and they sent out a serviceman, conveniently between the hours of 8 and 5. Turned out to be a relay, which of course they had to order and told me they would be out between the same convenient hours of 8 to 5 just to install it. If I did it myself, I was told it would void the warranty. It seems like nothing these days is quality, and everything is nothing more than imported foreign crap. Oh and another thing, whatever water pump this fridge uses to make ice has got to be the loudest one they could find. Its absurd that they think this is acceptable. Won't be buying another Maytag, Whirlpool, Amana, or whatever other junk they slap their various brands on.

Save 19% Off

Whirlpool GSF26C4EXS Gold 26.4 Cu. Ft. Stainless Steel Side-By-Side Refrigerator - Energy Star

• Whirlpool
• Whirlpool Gold GSF26C4EXS 264 cu ft Side by Side Refrigerator with MicroEtch Spill Control Glass Shelves Convertible MeatnVeggie Compartment InDoorIce Plus and External IceWater Dispenser Stainless Steel
• GSF26C4EXS
• Whirlpool - GSF26C4EXS

After getting unit set up, we discovered the water from the dispenser is never cold, in fact it is a little warmer than our tap. I called whirlpool and was told this is the design of the fridge. The water will be "on average 50-60 degrees" Well we live in az so our water on average is about 70 something. They told me that the designs of their side by side is no reserve anywhere so the water will not be cold -Though the customer service rep was kind enough to suggest I add ice to my water if I want to make it coldLoved their old stuff, hate this new fridge and regreat buying it.

Buy Whirlpool GSF26C4EXS Gold 26.4 Cu. Ft. Stainless Steel Side-By-Side Refrigerator - Energy Star Now

I didn`t hook up the ice maker/water line as they are problematic. The rest is awesome. Great temperature control. Keeps the food cold. Adjust and check the temp easily. Quiet. Spacious. Seems good quality. Plenty of room. Bins are nice size. All brands have good and bad reviews. It`s a crap shoot on anything today. Companies are buying and selling out. Stuff is coming from overseas and they use cheap labor and parts. The shelves are strong and hold most heavy products. Easy to clean. The inside lighting is good. The bins are made of strong material on the inside. And spacious. Update-just hooked up the ice maker. Let you know if my kitchen turns into a swimming pool. It gives adequate ice for us. The cube size works for us. I know there are some that have problems with this ice maker and it may not last. The waterline may freeze up. Let you know. Update! Not having any problems with the water line or the ice maker. There are a lot of refrigerators with out ice makers that are having problems. The products are from China to keep up with the competition.

Orien 100 Bottle, 2-Door Wine Cellar

• UL approved for commercial use
• Air-cooled condenser
• dual independent temperature zones
• front vented for built-in or freestanding applications
• CFC -Free

I need to preface my review with the fact I've only had this cooler for 3 days so I can't speak to it's longevity. That being said, it is clearly well-made. It is quiet and and easy to operate. Each shelf holds five bottles two facing one way and three facing the other. Those wine bottles that are of a larger style will fit in every shelf. Ventilation is out the bottom front. I noted the sides were warm to the touch when the unit was initially cooling but not after all the glass and liquid temperatures had lowered and stabilized. Mine is sitting out in the open but it would look classy in a built-in installation. I'm writing this review as a service as I know how hard it is to locate a good wine cooler. In our family, we've gone through three total pieces of junk. One of them actually defaulted to a freezing temperature after a power loss. (BTW This one keeps your settings). Excuse the amateurish video.

Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap

• Includes 2 American "D" System Sankey Lever Handle Couplers
• Includes: Commercial Grade Gauge Co2 Regulator with Co2 Splitter & 5lb CO2 Tank (empty)
• Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
• Black Exterior (black door), Rounded corners door style
• Heavy duty casters for mobility

First, I'd like to address the comment "hope you like warm beer". Not sure what they're talking about. I have my thermostat set about 1 inch colder than "normal" on the dial. The fridge has two 1/6 kegs of Victory beer, both are ice cold. Initially I had it set much colder but the temperature readings were showing I was close to freezing. Ideally beer should be between 33F 38F.

Foaming

I initially had foaming issues. There are two ways I know how to fix this:

1) Get longer lines $10

2) Get a flow control tap $50

Personally, I opted for the lines. Buy something high quality. I went with 10' of BevLex 200 3/16 for each line from a local homebrew store. You can also purchase it online. Start with 10' and trim until it pours the way you want it to. You want the beer to "fall" out of the tap. The top of the tower pulls off. Under that there is a piece of Styrofoam. From there you can remove the taps/line. Call the Beverage Factory if you need any help, they're happy to do so.

If you're worried about the beer sitting in the line, don't. 10' of 3/16 line holds about 1.5 ounces of beer, which is basically nothing -I measured it. The beer is well carbonated and tastes amazing.

PSI/Regulator Carbonation levels

Your best bet on PSI/Regulator settings is to contact the brewery that makes the beer. They can give you the target PSI they serve there's at. Then, you can use this chart [google for Solubility-of-carbon-dioxide-in-beer] to find out what you should be setting your regulator to. Most beers will fall between 2.40 2.57. It's important to know what the temperature of your beer. co2 has different pressures at different temperatures. **TIP** place a glass of water in the fridge over night and temp that. It will give you a more accurate temperature than a free standing thermometer. Example: your beer is 36F, you want a target PSI of 2.40. Your regulator would need to be set somewhere between 9 10.

Overall, I'm very happy with this kegerator. Happy pouring!

Buy Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap Now

It's a good first kegerator for the money. I homebrew and I've used this kegerator for ales, IPAs, stouts, belgian dubbles, and lagers. I use the 5 gallon homebrew kegs, so I can't comment on the commercial couplers. If you like higher carbonated beer, you may want to get a flow control tap since this kegerator comes with standard taps. (I've had foaming issues with anything over 8psi. Then again, if you're having foaming issue, you can use longer line from what I hear) I did run into an issue with one of the taps sticking, but that's semi-normal for these cheaper taps. As far as temps go, it keeps the beer cold enough for me. I've even had a beer line freeze at one point.

Honestly, looking back, I wish I would have just bought a mini fridge. That's all this thing is in the end... a mini fridge with a two inch how drilled in the top so you can screw on the draft tower.

If I were going to do this again I'd say just buy a good mini fridge and drill, baby, drill.

Read Best Reviews of Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap Here

I bought this kegerator for my boyfriend for Christmas and it's exceeded both our expectations. The kegerator is sleek and stylish and fits in great in our living room. We're now the place where all of our friends want to gono more hanging out at local bars paying for overpriced beer when we can experience this at home! We got the D system coupler for Fat Tire and an S coupler for New Castle and Stella. The only bummer is we can't have two import kegs in there at the same time but that's not a big deal. Overall, we're really happy with our new "toy" and I'm really happy with the service provided thus far with Beverage Factory! A+++!!!

Want Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap Discount?

I would not recommend Haier kegerator, unless you like warm beer. I set it to it's coldest setting let it run for a day and the coldest it got was to 46 degrees Fahrenheit. As you know there's nothing better than warm beer. The really bad part of this is my wife ask me what I wanted for xmas, and I said I wanted a Danby kegerator it came highly recommended by a good friend. When she called "Beverage Factory" they said that Danby has a problem getting cold enough to get the beer to it's coldest optimal temperature. That they highly recommended Haier, but if you read between the lines what there really saying is that they get there most optimal profits selling haier. I also don't recommend the beverage factory. They never ask what kind of beer that you like to drink and that different beers have different types of couplers. So they just send off the standard American coupler. This doesn't work for Imported beers. Just bad all the way around, not to mention I probably lost a keg of Bass. The beer Gods are going to be very, very upset. "Don't buy from Beverage Factory" Try not to buy China Cr@p buy something thats made in the U.S. you can't go wrong. Good luck everybody and the next rounds on me!

Supco WV8047 Single Coil Icemaker Valve Replacement for Whirlpool 4318047

This unit was exactly as described,installed very easily, and worked perfectly on the first try. A welcome addition to the unit was a bag of all sorts of adapters, and I used a few of these adapters to complete the installation thus avoiding a panic search for adapters. Super speedy shipping by the seller was very nice also. This was a very good purchase

Great little valve at a sensible price. It includes all sorts of different hardware for all mounting scenarios. I'd definitely recommend this repair solenoid valve 100%.

Buy Supco WV8047 Single Coil Icemaker Valve Replacement for Whirlpool 4318047 Now

Installed easily. However i did have some trouble stopping leaks where the input hose connected to this unit. Other than that it has been working perfectly since I installed it.

Read Best Reviews of Supco WV8047 Single Coil Icemaker Valve Replacement for Whirlpool 4318047 Here

perfect match , took 5 min to change out, but it did take 10 days to arrive so that could improve some

Want Supco WV8047 Single Coil Icemaker Valve Replacement for Whirlpool 4318047 Discount?

Ugh, nothing worse than coming home to find water and ice all over the fridge and freezer. Luckily though this was a perfect replacement for my faulty valve, it arrived very quickly, and it came with all the little hardware pieces that made replacement a painless 5 minute task. It has been running for a day now and is filling the ice maker beautifully with hardly any noticable noise compared to the old one.

Save 16% Off

3.9 Cu. Ft. Capacity Stainless Steel Top Load Washer - White

• 3.9 cu. ft. capacity stainless steel top load washer
• Energy Star qualified
• Hydrowave quiet agitator wash system provides a gentle, thorough cleaning
• Rotary electronic controls with cycle status lights provide accurate cycle times
• 16 varied wash cycles for nearly unlimited options

I, like so many others, was horrified when my washer finally died after 22 years. After reading all the reviews, virtually no washer available got what I considered really good marks, even those that were well over a $1,000. Consumer reports is starting to get silly on this environmental stuff so they didn't even review washers with agitators. Geesh! Amazon is starting to be more and more reliable and is quoted quite often by reviewers with the advantage of being able to read each review. After balancing reviews, costs, and using a little common sense, I decided to go with this washer.

First thing everyone needs to understand, these new style washers do not fill with water. When the wash cycle starts, the wash basket spins slowly while water is sprayed onto the garments, thus soaking the garments. You need to place the detergent in the washer before the wash starts since there is not enough water to disperse the detergent in the same manner as the old washers. I think that is what is worrying so many people...it's just different. There are also separate dispensers for bleach and fabric softener; I have used the one for bleach and it worked beautifully.

Reading the manual is a must because it really lays out what exactly the washer does and it's easy to manipulate the settings to do what you'd like. There's even a setting for just blue jeans. Or, you can override everything and just do long washes filled with as much water as the machine allows...but I doubt the wash would come out any better. Also a big plus, most regular loads have come out really, really dry. It's almost bizarre of how rung out they are and it has cut down on drying time. It is also very quiet...at least compared to our old machine.

Of course, I have no idea how long this washer will last but it has really exceeded my expectations. I honestly am very surprised at how well this washer works. My only advice for reading reviews on these new washers is realize they use much, much less water and spin really fast so complaints that are the results of those two realities, like clothes being twisted due to the fast spin, you almost have to ignore.

This is a very, very good washer and the price makes this thing a best buy, in my opinion. I honestly couldn't be happier.

2.26.13: Just as a quick add-on as I've now had this washer for over 3 months. I live in the country and am on a well system for water. Due to our filtration system I can see how much water we use. We use so much less water now I am shocked. Now, for me, I'm not that big on the ecological stuff as I find most of it to be misleading. However, if you want to use less household water, this washer has made a significant difference. If water conservation is a concern, then this is a good washer for that reason alone.

Buy 3.9 Cu. Ft. Capacity Stainless Steel Top Load Washer - White Now

We have been very happy with this machine since purchasing it roughly two years ago, after our last washer gave up the ghost. The tank in the old machine developed a serious leak, which would have cost as much as a new machine to fix.

This model uses less water and far less energy than the old one, as it is designed to handle the new extra-strength super soaps, which produce the same clean for about a third of the volume of soap.

The tank may look like it has very little water in it, but in fact it is quite wide and deep, which enables the machine to rotate at slower and more gentle speeds than older models, with less water.

The tank is stainless steel, as opposed to older style machines whose tanks with fragile ceramic coatings that often chipped and cracked.

Stainless steel can be expected to hold up without rusting or popping leaks.

We bought this unit on the advice of a parent who had recently bought a similar model and was very happy with it. So far, so good.

Read Best Reviews of 3.9 Cu. Ft. Capacity Stainless Steel Top Load Washer - White Here

This machine gets my clothes clean, uses less water, detergent, and electricity than my last machine and has a huge basket. The basket does not fill all the way but I have ran some pretty big loads and have not noticed any spotting or problems with my clothes. The power rinse option seems to compensate for not filling the basket all the way. My preferred setting is the manual fill Super Load, with cold water for colors and warm for whites and I always use the PowerRinse option. Only drawbacks I've noticed is that the machine is much louder than I expected it to be (especially when the agitator is running) and that it took forever to ship from the dealer I ordered it from. These are the reasons I only give it a four star. Owned it for a little over a month now though and no major complaints thus far. I called GE on the noise and they said this should decrease with time and is completely normal when breaking in a new wash machine. Time will tell.

Want 3.9 Cu. Ft. Capacity Stainless Steel Top Load Washer - White Discount?

I had to purchase a new washer when my old one finally gave up after having been repaired twice. This one is very quiet and after the spin cycle, the clothes are very dry so that drying time is cut in half. I have seen negative reviews complaining about the water level. I just turned it to super and didn't use the precise fill selection. Also, I saw a tip from another owner that if you select the fabric softener rinse, you will get more water in the rinse cycle. I used to have to close the laundry room door, which is right off the family room where we watch TV when using the old one. This one was so quiet I had to go check to see if it was running. I did find that I don't have to use as much detergent so that will save some money, there is a speed wash cycle if I need something in a hurry and shorter drying time. My best friend has a front loading HE washer and hates it. She saw this one and now wants to come try it out to see if she wants to sell hers and get one. Apparently mold and mildew buildup in hers is a problem. As far as how long this washer will last remains to be seen, but initially I am very pleased.

Update 2/12/2013 I have been using the washer for a few weeks now and I still love it. I have read reviews where people have complained that it doesn't use enough water. If you learn to use the settings, you can get as much water as you want. I have to wash a lot of dirty jeans and towels. I use the super load setting and the fabric softener rinse setting. Both give plenty of water and my clothes get as clean as I could expect. No, not every stain comes out, but some of them are just permanent and no washing machine on earth could get them out. Spin cycle gets clothes very dry so my dryer only needs to run about half the time.

Save 10% Off

The first motor stopped working 6 months after we got it. The second one was a little better it lasted 2 years. Now we're getting our third motor in three years. And this was not as a result of heavy use we're a family of 2, no kids. Our last GE washer lasted 12 years with no problem. They don't make 'em like they used to.

AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-pack

Easy to replace filters are an excellent way to keep filtered/cold water available 24-7. Best price that I could find. Performs as well as OEM filters.

Happy with it. Installs the way it should and works the way it should. Seems to be a good product.

Buy AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-pack Now

Loved the idea of saving money on the filters but these were a big mistake! We absolutely hated the taste of the water with these. It was a big mistake and we couldn't wait to get the actual Whirlpool ones. I will say the seller was great about the return. I'd buy from the seller again but not this product.

Read Best Reviews of AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-pack Here

I bought this thinking I could save a buck! it takes about 2 weeks of use before the water is just "ok" better than tap water but not clean and fresh as the name brand.

Want AquaFresh Replacement for Whirlpool 8171413/NL200 Filter, 3-pack Discount?

Works well for the cost. Can't tell a difference between these and the OEM. Would buy them again in the future.

Save 57% Off

Whirlpool Kenmore Refrigerator Filter Housing Cap 2186494W

• Genuine OEM replacement filter cap
• For fridges with a white grille

Have to replace the old filter on a Kitchen Aid and the old cap was already broken. This new one fits in perfectly, except that the color (bright white vs creamy white) doesn't match exactly. It's much easier to turn than the original one.

Buy Whirlpool Kenmore Refrigerator Filter Housing Cap 2186494W Now

I ordered this cap and it works just fine. It is a factory replacement cap. The challenge was that it is recessed into the grill. That limits the access your fingers have when turning the filter, making this a frustrating and time-consuming process!

What to do? Partially remove the grill. Pull the grill down and away at the right corner. Continue pulling the grill away and work this separation toward the area of the filter. What you are trying to do is gain separation between the grill and base of the fridge. When you do, open the freezer door and slide your fingers on to the cap (your fingers should be between the grill and fridge at this point). You won't have a lot of space, but it is more than just trying to twist the filter cap when it is recessed from the outer part of the grill.

Read Best Reviews of Whirlpool Kenmore Refrigerator Filter Housing Cap 2186494W Here

Since I have to use pliers to turn the cap to get the filter out the cap gets all beat up. This cap will come in handy when I have to change my old beat up cap.

Want Whirlpool Kenmore Refrigerator Filter Housing Cap 2186494W Discount?

It's hard to know what to say about a cap it's just a cap after all but this one is exactly as described and replaces my damaged one just fine. This is a pass/fail kind of product, and it passes.

Save 25% Off

It was so awesome to be able to replace my missing refrigerator filter knob on Amazon! Easy transaction, great price!