Showing posts with label arctic air refrigerator. Show all posts
Showing posts with label arctic air refrigerator. Show all posts

Friday, October 10, 2014

Water Sentinel WSL-1 Replacement Water Filter, 6 PACK

Water Sentinel WSL-1 Replacement Water Filter, 6 PACKAll in all, this is great, especially for the price. My only complaint would be the noise. It may be this particular filter, but when I get water from the fridge, it is louder; not bad or unbearable, just noticeably a little louder. The flow and the taste of the water seem about the same, so I don't know why this filter is causing more noise???

Sunday, June 8, 2014

EdgeStar Built-In 18 Bottle Wine Cooler

EdgeStar Built-In 18 Bottle Wine CoolerWhen our wine cooler arrived, it had been damaged during shipment. Living Direct stepped up and replaced the unit immediately. They could not have been more responsive. The unit is great, very quiet.

Monday, March 24, 2014

Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap

Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap
  • Includes 2 American "D" System Sankey Lever Handle Couplers
  • Includes: Commercial Grade Gauge Co2 Regulator with Co2 Splitter & 5lb CO2 Tank (empty)
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
  • Black Exterior (black door), Rounded corners door style
  • Heavy duty casters for mobility

First, I'd like to address the comment "hope you like warm beer". Not sure what they're talking about. I have my thermostat set about 1 inch colder than "normal" on the dial. The fridge has two 1/6 kegs of Victory beer, both are ice cold. Initially I had it set much colder but the temperature readings were showing I was close to freezing. Ideally beer should be between 33F 38F.

Foaming

I initially had foaming issues. There are two ways I know how to fix this:

1) Get longer lines $10

2) Get a flow control tap $50

Personally, I opted for the lines. Buy something high quality. I went with 10' of BevLex 200 3/16 for each line from a local homebrew store. You can also purchase it online. Start with 10' and trim until it pours the way you want it to. You want the beer to "fall" out of the tap. The top of the tower pulls off. Under that there is a piece of Styrofoam. From there you can remove the taps/line. Call the Beverage Factory if you need any help, they're happy to do so.

If you're worried about the beer sitting in the line, don't. 10' of 3/16 line holds about 1.5 ounces of beer, which is basically nothing -I measured it. The beer is well carbonated and tastes amazing.

PSI/Regulator Carbonation levels

Your best bet on PSI/Regulator settings is to contact the brewery that makes the beer. They can give you the target PSI they serve there's at. Then, you can use this chart [google for Solubility-of-carbon-dioxide-in-beer] to find out what you should be setting your regulator to. Most beers will fall between 2.40 2.57. It's important to know what the temperature of your beer. co2 has different pressures at different temperatures. **TIP** place a glass of water in the fridge over night and temp that. It will give you a more accurate temperature than a free standing thermometer. Example: your beer is 36F, you want a target PSI of 2.40. Your regulator would need to be set somewhere between 9 10.

Overall, I'm very happy with this kegerator. Happy pouring!

Buy Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap Now

It's a good first kegerator for the money. I homebrew and I've used this kegerator for ales, IPAs, stouts, belgian dubbles, and lagers. I use the 5 gallon homebrew kegs, so I can't comment on the commercial couplers. If you like higher carbonated beer, you may want to get a flow control tap since this kegerator comes with standard taps. (I've had foaming issues with anything over 8psi. Then again, if you're having foaming issue, you can use longer line from what I hear) I did run into an issue with one of the taps sticking, but that's semi-normal for these cheaper taps. As far as temps go, it keeps the beer cold enough for me. I've even had a beer line freeze at one point.

Honestly, looking back, I wish I would have just bought a mini fridge. That's all this thing is in the end... a mini fridge with a two inch how drilled in the top so you can screw on the draft tower.

If I were going to do this again I'd say just buy a good mini fridge and drill, baby, drill.

Read Best Reviews of Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap Here

I bought this kegerator for my boyfriend for Christmas and it's exceeded both our expectations. The kegerator is sleek and stylish and fits in great in our living room. We're now the place where all of our friends want to gono more hanging out at local bars paying for overpriced beer when we can experience this at home! We got the D system coupler for Fat Tire and an S coupler for New Castle and Stella. The only bummer is we can't have two import kegs in there at the same time but that's not a big deal. Overall, we're really happy with our new "toy" and I'm really happy with the service provided thus far with Beverage Factory! A+++!!!

Want Haier Kegerator HBF05EABB-2 Dual Faucet Keg Beer Cooler Tap Discount?

I would not recommend Haier kegerator, unless you like warm beer. I set it to it's coldest setting let it run for a day and the coldest it got was to 46 degrees Fahrenheit. As you know there's nothing better than warm beer. The really bad part of this is my wife ask me what I wanted for xmas, and I said I wanted a Danby kegerator it came highly recommended by a good friend. When she called "Beverage Factory" they said that Danby has a problem getting cold enough to get the beer to it's coldest optimal temperature. That they highly recommended Haier, but if you read between the lines what there really saying is that they get there most optimal profits selling haier. I also don't recommend the beverage factory. They never ask what kind of beer that you like to drink and that different beers have different types of couplers. So they just send off the standard American coupler. This doesn't work for Imported beers. Just bad all the way around, not to mention I probably lost a keg of Bass. The beer Gods are going to be very, very upset. "Don't buy from Beverage Factory" Try not to buy China Cr@p buy something thats made in the U.S. you can't go wrong. Good luck everybody and the next rounds on me!

Saturday, March 22, 2014

AE-Select Replacement Part 8577274 Dryer Thermistor Control for Whirlpool

AE-Select Replacement Part 8577274 Dryer Thermistor Control for Whirlpool
  • THIS WHIRLPOOL 8577274 THERMISTOR WORKS WITH MANY WHIRLPOOL, MAYTAG, KITCHENAID AND KENMORE CLOTHES
  • DRYERS.
  • DETAILS: BLACK THERMISTOR CONTROL.
  • Works with the following models: Whirlpool 3LCED9100WQ0, Whirlpool 3LCGD9100WQ0
  • Whirlpool 7MGGW9200MW3, Maytag 7MMGDB850WL0, Whirlpool 7MMGE9959TB0, Whirlpool 7MMGE9959TW0

I bought this replacement part for my Kenmore dryer, which kept beeping in the middle of a drying cycle and stopping. So far so good.

Buy AE-Select Replacement Part 8577274 Dryer Thermistor Control for Whirlpool Now

Very pleased with my purchase, delivery was earlier than expected and product was exactly as described. I would buy from this seller again and again. Thanks

Read Best Reviews of AE-Select Replacement Part 8577274 Dryer Thermistor Control for Whirlpool Here

Don't take your machine completely apart as instructed on some installation advice! After removing the top and front panel of machine I was able to replace it with a short handled screwdriver.

Want AE-Select Replacement Part 8577274 Dryer Thermistor Control for Whirlpool Discount?

Almost 10 year old Whirlpool Duet gas dryer stopped drying our clothes! Thought we'd have to buy a new one. Hubby said, "Google the problem first." Very glad I did. Ordered this part, helped him install it & although it doesn't look exactly like the part we removed, it absolutely solved the problem. Has worked just fine the past 4 months. And, like a previous reviewer mentioned, it was the perfect time to vacuum all the old lint out.

I have an older Kenmore (Whirlpool) EvenHeat dryer that was finishing the cycle before the clothes were dry. I replaced this little part and I was golden! It does look different than the older black part with some sort of glass and copper looking protrusion vs. the white bump on this one. I acccidentally replaced the thermal fuse next to it at first and was disappointed the "thermistor" repair I thought I did didn't actually fix the problem. Right replacement solved it though.

Wednesday, February 19, 2014

Whirlpool 25.0 Cu. Ft. Stainless Steel French Door Refrigerator - GZ25FSRXYY

Whirlpool 25.0 Cu. Ft. Stainless Steel French Door Refrigerator - GZ25FSRXYYWe are very satisfied with purchase. We did not get from Amazon, I often go here to look at reviews on big items like this. It is very big, plenty of room. Love the middle drawer. The owner's manual said you can use it for: 1. items you use most often, saves energy from opening a small drawer versus the 2 french drawers. 2. for kids, the things they use most often, they can serve themselves. 3. fruits and veggies. The freezer holds more than I expected, like the basket shelf at the top. A review on another site mentioned she had to lay her juices down, but we found the shelves to be quite adjustable, we can fit a pitcher and large juices on the bottom left of the fridge. Also like that a gallon of milk fits is the door. The icemaker is small, but we don't use tons of ice anyway. All the controls are on the outside. We like the feature that premeasures water for your special water bottle, or for cooking (read manual to calibrate before using feature).

This unit is great. It handles what a family of 5 needs. The ice maker is perfect for our family, not sure what the other person had a issue with. It holds up to 10 lbs of ice and keeps up with our busy family. This is a great frig, and would highly recommend this.

Buy Whirlpool 25.0 Cu. Ft. Stainless Steel French Door Refrigerator - GZ25FSRXYY Now

You can pick up this fridge for about $1,500 as it often goes on sale.

So far everything appears to be wonderful for us with this unit. As for the ice maker the manual states that you should expect your first batch of ice in 24 hours. Ours dropped in about 6 hours (only a few cubes), but after that a it produced a lot of ice. Water quality and temperature settings can affect ice production, but there are no problems to report here..so don't get scared by other reviews claiming otherwise.

Read Best Reviews of Whirlpool 25.0 Cu. Ft. Stainless Steel French Door Refrigerator - GZ25FSRXYY Here

We bought this refrigerator last November. The middle drawer is wonderful to store snacks for kids, and love the ice and water in the door, with the measured fill so the kids do not accidentally overfill their water.

Want Whirlpool 25.0 Cu. Ft. Stainless Steel French Door Refrigerator - GZ25FSRXYY Discount?

I got Whirlpool 4-door French door refrigirator during the Labor Day weekend (sale). My wife loves the configuration of the doors and drawers. Through glass partitions and floors, we can see each storage section at a glance and easily. Size-wise, it's more than enough for a retired couple like us. My wife loves this every day.

Wednesday, July 24, 2013

12868513 FRIDGE CONTROL BOARD WHIRLPOOL KENMORE MAYTAG JENN-AIR NEW OEM PART 11

12868513 FRIDGE CONTROL BOARD WHIRLPOOL KENMORE MAYTAG JENN-AIR NEW OEM PART 11
  • 12868513 FRIDGE CONTROL BOARD WHIRLPOOL KENMORE MAYTAG JENN-AIR NEW OEM PART

As a person who is not into electronic and yet did not want to pay hugely a tech to fix my refrigerator, I was very reluctant it will fit let alone how to install it. No problem, with enclosed instructions I did it perfectly and it works like a champs with a lot $$ in my pocket.