Whirlpool Duet Steam 3.8 Cu. Ft. Silver Front Load Washers - WFW9550WL

• Whirlpool
• Whirlpool Duet WFW9550WL 27 FrontLoad Washer with 44 cu ft Capacity 12 Wash Cycles Steam Fabric Care System Sanitary Soak Sanitary Cycles Automatic Water Level Control Stainless Steel Tub Lunar Silver
• WFW9550WL
• Whirlpool - WFW9550WL

My wife and I bought a brand new Whirlpool Duet Steam washer and dryer set. We loved it for a little over a year. Then the main bearing and the pressure sensor on the washer went out. The cost to repair would have been over $1200. We didn't pay that much for the washer. I called customer service and they told me that they would not do ANYTHING after the one year warranty period expired "NO EXCEPTIONS!!" I found it difficult to believe that a company as established as Whirlpool would have such a policy. I talked to supervisor and pressed him on the issue. The answer remained NO EXCEPTIONS. If anything breaks after one year, it is your responsibility. I understand normal wear and tear, but I expect the main bearing on the washer to last several years. I am still stunned that a customer service supervisor would actually tell me that after one year (even a year and a day as I asked him) they will do NOTHING. Whirlpool does not care about anything after one year. The service man that came and looked at the unit says this happens with Whirlpool often. He said LG and Samsung have better bearings and will last longer. I am still a huge fan of the front load washers and I will be shopping for a new one, but it won't be Whirlpool never again.

Buy Whirlpool Duet Steam 3.8 Cu. Ft. Silver Front Load Washers - WFW9550WL Now

Bought this machine in March 2010. Runs like a dream and never had problems. True to form, I wash one big load vs. multiple smaller loads now and no problems. Love it and highly endorse Whirlpool products.

Keggermeister KM2800SS Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Stainless St

• Full-size single-tap beer dispenser keeps beer fresh for up to 3 months
• Accommodates a full-size keg, pony keg, or 2 5-gallon kegs
• Adjustable temperature control; 3-sided chrome guard rail around top work surface
• Smooth-rolling casters; UL-approved for commercial use; CO2 bottle included
• Measures 25 by 21 by 49 inches

The Kegerator comes packaged in double "double walled" boxes with a lot of Styrofoam packaging materials and materials. All of the minor components are neatly organized in a separate box inside of the Kegerator fridge. After removing all the pieces and laying them out, I began to read the instruction manual. The manual content is very clear and concise with well illustrated pictures on the assembly of the unit and pieces. The box was undamaged in shipping .

Assembly is fairly simple, anyone with basic knowledge of hand tools should have no problem. It takes about 20-30 minutes to get it put together and running, the one thing I would advise any owner is to take your time and learn the pieces of the dispensing system while you assemble it. This is critical in understanding how everything works in order to be able to trouble shoot any issues should they arise.

The unit comes with a 2.5lb C02 tank that I was able to get filled up for less than ten bucks. I recommend a local paint ball shop since they are better equipped to fill this size of tanks up. Welding supply shops also work.

Once everything is assembled and it was plugged in it turned right on and gave a silent hum as if to let me know it was on. Even with the compressor cycling on and off it still maintains a very minimal noise level.

After allowing the refrigerator to operate with no keg in it for 24 hours I decided to give it a test drive. The first keg used was a Pony Keg of Budlight. After letting the Keg sit and cool in the Kegerator for another 24 hours it was time for the first pour which resulted in nothing but foam. After doing a bit of trouble shooting I realized I had opened the valve on the C02 tank all the way for max flow. This resulted in over pressurizing the keg. To fix this I closed the valve and adjusted the regulator to having it near closed. I then pulled the pressure release pin on the coupler releasing the built up C02 in the keg. The next glass I poured came out perfectly pure golden bliss with a decent layer of foam.

About 40 minutes layer I tried to fill up a pitcher of beer and was presented with a near perfect pour. This was more than enough of evidence that there was a consistent pressure and was at an optimal level for consistent pouring.

I purchased the black unit after a side by side comparison the stainless steel definitely would look great in someones kitchen. The reason why i did not purchase the stainless steel unit is because i preferred the black exterior. The chrome guardrail and stainless steel spout add a nice touch to the overall exterior of the unit. Cleanup is easy and was simple with just a bit of standard surface cleaner. I was also able to change out the tap handle with a standard Brewing Company handle.

Keg's that have been run through this unit: Pyramid Hefeweizen, Budlight, Budweiser, and Dos Equis

Buy Keggermeister KM2800SS Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Stainless St Now

I guess I should have known this unit would be made in China, thus the reason it seemed so reasonably priced. I bought this unit from another source so Amazon is not reflected in this review at all. The unit had minor damage from its long journey. The instruction booklet is a joke. You get a bag of small rubber washers and parts of various sizes with no cross reference to where they go. If they told you thickness and diameter of the washers relating to where they go it would have helped. The Co2 line is very small diameter and possibly inadequate. The biggest problem is unit will not get beer colder than 45 degrees at best with the thermostat maxed out. I won't go into the support or lack thereof since Amazon was not involved in this transaction. My advise, look at another unit or do your own conversion making sure to get a thermostat that will get beer cold.

Read Best Reviews of Keggermeister KM2800SS Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Stainless St Here

For the price, this is a great buy. I've read mixed reviews, but had no trouble with mine. The beer is staying the right temperature, the Co2 is tricky to figure out, but would be on any keggerator I think. Very happy with this!

Want Keggermeister KM2800SS Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Stainless St Discount?

Got this for super cheap as I think the company is trying to clear them out.

Here is the deal, this is a cheap kegerator. It will preform as well as any kegerator

GE GTH18CBDRWW

• Adjustable Wire Shelves
• Crisper Drawers
• Gallon Door Storage
• Can Storage Door Shelf

This is a basic refrigerator and it basically works.

It was quiet when I bought it but it became VERY noisy after a couple months of use. GE appliances now have a rep now for low quality and expensive parts for repairs. I ignored my own common sense because this was a good deal and was supposed to be quiet.

I would not consider a GE fridge (or other GE appliances) again.

The door handle is prone to staining and difficult to clean too (because of its rough texture).

NOTE: I just had a GE Repair guy check out the noise. He said it sounded like oil or something was in the coolent pipes making a bubbling rapid "farting" (his word) sound. Nothing to be done about it.

ALSO: According to my local dept. of Energy, this model is less efficient than the previous model it replaced (otherwise nearly identical).

Way to go GE. You've sold your legacy for a quick buck.

Buy GE GTH18CBDRWW Now

I bought this refrig at Home Depot because I needed the width and depth and didn't think much else about it.

Glass shelves I like but it is the NOISYEST refrigerator possible. I swear you would think the water is running in my kitchen when it gurgles and comes on and off. VERY LOUD. Also a poor design. On the top front inside the refrig has a bump that lowers the 'ceiling' of the refrig about 2-3 inches so that to get a gallon of milk on the top shelf you have to move the top shelf down to the 3rd rail. I could not find the exact model of mine on amazon but I believe it is a variant of this refrigerator that I am reviewing. My model # is actually: GTH18EBT3RWW

Don't get me wrong, it works but it is LOUD LOUD LOUD

AquaFresh Replacement Refrigerator Filter for Frigidaire (RC200/WFCB, RG100/WF1CB), 3-Pack

This is, hands down, one of the best deals ever. Lowes and Home Depot charge $30 a piece for these filters. I got 3 of them for under that. They are brand new, the water and ice from my fridge tastes just as good as it did with the name brand filter, no fit problems, and did I mention they were less than $10 a piece? Great buy.

Much less expensive than Frigidaire branded filters and works just as well. Fits like factory and water tastes great. Good product.

Buy AquaFresh Replacement Refrigerator Filter for Frigidaire (RC200/WFCB, RG100/WF1CB), 3-Pack Now

We were spending too much on a fridge filter and this price attracted our attention! The filter itself seems to be the same as the Fridgidaire brand and now we can change it more often... So nice to have fresh clean taste again!

Read Best Reviews of AquaFresh Replacement Refrigerator Filter for Frigidaire (RC200/WFCB, RG100/WF1CB), 3-Pack Here

These filters work very well and great price if I had gotten these from any where else the price would have been much higher.

Want AquaFresh Replacement Refrigerator Filter for Frigidaire (RC200/WFCB, RG100/WF1CB), 3-Pack Discount?

Not sure how to rate this. They fit in my fridge and filter my water. So I guess it is fine.

Save 27% Off

Whynter WC-16S SNO 16 Bottle Wine Cooler, Platinum with Lock

• Adjustable thermostat for storing different wine varietals (52F - 64F)
• Celsius and Fahrenheit temperature display
• Enhanced Blue Light LCD temperature display feature for precise control
• Cylinder lock and two keys included
• Solid state components for long life- the only moving parts are fans to circulate cool air within the wine cooler and dissipate heat outside the unit

After reading the mixed reviews I decided to roll the dice and order this item. I could not find a 16 bottle fridge anywhere close the price.

The packaging was excellent, no signs of damage to the box at all (it came from Dallas to San Antonio).

The setup takes minutes. The handle does not come pre-attached but was easy to install. You can use it without. I don't currently have a use for the keys, but once I have children I think it will come in handy.

I read other reviews about it not being able to store white wine, which is not true, wine needs to be stored around 60F to maintain its life. White wine should be "served" at a lower temp which is differant. I don't think its a big deal stick a bottle of white in the kitchen fridge 30 minutes before I start drinking it.

Only had it a week but so far so good, it is very quiet and maintains the temp it is set too.

One thing to note when placing the cooler is to make sure you have the proper clearances to maintain airflow (2" on the sides and 4" at the back). I suspect this may have been a problem people with burned out fans/motors have had. This is not a "built-in" unit.

Buy Whynter WC-16S SNO 16 Bottle Wine Cooler, Platinum with Lock Now

I bought this specific wine fridge because it has a lock. In order to be a licensed foster home, all of your alcohol must be locked away. It fits 16 bottles very comfortably inside and always shows the inside temperature in a nice blue digital light. I keep mine at the lowest possible, 51 degrees and it only seems to go up if I open the door. I like that there's room on the bottom of the fridge that can fit 6 bottles of beer laying on their side. If you're buying better beer (not miller/coors/bud) this is actually the right temperature to store it. We're brainwashed into thinking beer has to be ice cold, because crap beer does need to be ice cold in order to mask the skunked flavors. Anyway, the fridge also has an inside light you can turn on to display your wines. You have to put the cheap plastic handle on yourself, but I left it off. The lock is kind of a joke. The key is just a pentagon allen wrench. I think if your kid can uncork a bottle of wine, he/she can probably pick this lock with a screwdriver. Remember to keep it a few inches away from the wall on all sides or it won't get the proper air flow and you'll burn the motor out.

Read Best Reviews of Whynter WC-16S SNO 16 Bottle Wine Cooler, Platinum with Lock Here

We're aspiring but very budget conscious wine "appreciaters". Been slowly working our way up from 2buck chuck many years ago to Willamette Valley and even some interesting Chilean wines. Our 10 year old wine cooler finally had enough abuse and passed away peacefully a week ago and we decided to replace it with a compact countertop unit that would work with our 850 square foot apartment. We were tempted to get one of those very small "microwave looking" 12 bottle coolers but could not bring ourselves to live with something that tacky looking. Finally decided on a 16 bottle and after lots of indecisiveness went with this Whynter 16bottler.

Happy to report that my lovely wife, who is the picky one, was very pleased with the design and finish of this unit. It cools down fast to the the supposedly ideal 58F and maintains the tempreture well. It's a couple of bucks pricier than some others but I'm not complaining. This is working out great for us and would happily recomend it. BTW, Amazon prime is the best thing ever.

Want Whynter WC-16S SNO 16 Bottle Wine Cooler, Platinum with Lock Discount?

Very pleased with the unit. Had a Cuisinart that kicked the bucket after a year and was noisy to boot. This thing is ultra quiet and is terrific so far. Leave the handle off, it looks a lot better without it.

Save 17% Off

I've had this for more than a year now and it has done its job almost perfectly. Only negative is bottle size issues but almost all coolers have that problem and I just lay them in a different direction. Unit is not too loud and has kept wines at optimum temperature.

Whirlpool Refrigerator Evaporator Motor

• Enjoy the full function of your refrigerator by fixing your fan motor
• Designed to replace the fan motor in Whirlpool refrigerators
• Replacement is a cost effective way to use your current refrigerators for years
• Helps to regulate temperatures preserving your food
• Comes with a fan blade

I got a really great price on this item. It came in just a few days and was really easy to install. If you can use a screwdriver and know how to unplug the fridge then you are good...

If your fridge is making a errrrr noise (almost like a loud hum). It is the bearings in the fan motor going out. This affordable part will fix it and ordering it will save you hundreds over a professional.

Also the way I diagnosed it was to take the back of the freezer out. If you take out those two screws and slide the brackets UP that hold the freezer shelf, the back panel just slides UP also.

Spin the blade a little by hand and it will probably work for a little while. I left it that way with all of my food in there and just got the blade spinning each time it made the humming sound, until my evap motor came in.

Fixed good as new now!

Buy Whirlpool Refrigerator Evaporator Motor Now

Sis went down to our elderly parents basement and was alarmed by the noise the old kenmore fridge in the basement was making and unplugged it because she was afraid of it catching fire. On checking I found that the evaporator fan, in the back of the freezer had bad bearings and was screeching loudly. A replacement fan from the local appliance repair shop was almost $70.Parents did not want to spend big money on an old refrigerator, and they were going to replace it. Found this on amazon and thought why not? Had to do some trimming of the mounting bracket but it works just fine and is very quiet. The old Kenmore cools like new now. If you are buying this I recommend you also check the coil fan, usually located at the bottom of the refrigerator. Be sure that it is free to rotate and blow air over the coils in order for the refrigerator to cool well. Put a drop or two of turbine oil on the shaft where it goes into the motor housing once a year or so to keep it that way. You can buy this stuff locally at your local appliance shop or here on amazon at SEPTLS43479704 Zoom Spout Oilers I am not affiliate with Amazon, and not an appliance repair professional. However, a professional did tell me NOT to use motor oil for this purpose as the additives gum up the electric motors. Good luck and God Bless.

Read Best Reviews of Whirlpool Refrigerator Evaporator Motor Here

If you are looking to replacement fan motor in your Whirlpool, this is the way to go & the best price!

Want Whirlpool Refrigerator Evaporator Motor Discount?

Order took three business days to ship. USPS delivered in 36 hours from Lancaster PA to Minnetrista MN...very good. Package from USPS (Priority Mail) was undamaged, but internal contents (in box) were not packed for shipment (zero packing) so motor/bracket was bent 90 degrees and penetrating box while all other parts had been ripped from their bags...hope all aren't shipped this way. Being a universal fit made straightening/repair OK, but in addition, motor ran in wrong direction, so had to be disassembled. Never seen one run this direction, but knew I owned it at this point and original was screaming, so I reversed the armature. Supplier was "snarky" when talked to about delivery. Several of us have noticed that Amazon seems to not push orders immediately to suppliers. Purchase was not a great experience, however, USPS got it right. Unit has been installed for over a week and it seems to work fine, hence final rating of four stars.. I know you want seller/shipping feedback through different channel, but customers experiences are total and not by department, so forward if you want.

Save 77% Off

THIS PART DID NOT REPLACE THE ONE ON THE WHIRLPOOL REFRIGERATOR IT WAS NOT EVEN CLOSE TO THE ONE THAT WAS IN THE REFRIGERATOR...

Frigidaire Refrigerator parts defrost board 241508001 5303918476

perfect conditions, and it worked perfectly, i was able to fix my refrigerator, it came with all the wires and detail instructions . easy to connect and it was true, frigidaire changed to part to this one.

Just swap harness a plug at the time and follow the included directions and its easy! This item replaced my first gen. model and it Works Great!

Buy Frigidaire Refrigerator parts defrost board 241508001 5303918476 Now

No problems. Anyone can replace this part. Unplug the harness from the refrigerator, set the assembly in your lap and replace the harness one connector at a time.

Read Best Reviews of Frigidaire Refrigerator parts defrost board 241508001 5303918476 Here

Whirlpool W10190965 Icemaker for Refrigerator

Kenmore Coldspot 106-565xxxxx

The ice maker came with no instructions but if you managed to get the old one out, this one slides in fairly easily by reversing the process. There was an odd plastic piece screwed to the bottom of the unit which I removed and the bolted on the sliding shelf piece that was attached to my old unit. I plugged the unit in, slid it back into place and within 15-20 minutes the tray was already filled with water.

Make sure you let the first several batches go through and then throw away the ice to make sure you're not getting any manufacturing contaminants. I wiped the unit out a little and then let it run over night and dumped what it had created just to be paranoid.

If you replace this item and you're still having trouble, be sure to check the blinking LED on the side of the freezer that is the sensor/indicator light (assuming your model is like mine). There's a pattern to the LED blinks. On mine, it would blink twice, pause, and then repeat. If you close the flap for the sensor, the blinking would change to a solid light. If you close the flap, and you're still getting blinking then there's a good chance that the sensor is somehow blocked or no longer good. In this case, you'll need a control board which for mine was...I believe...this model: Whirlpool Refrigerator P.C. Control Board Kit 4389102

Good luck!

I used the control/motor piece from this unit (connected with three screws) to replace the one in my old ice maker (from a Kenmore 106.565xxxx side-by-side black fridge bought in 2005) and it seems to have done the trick. It is now making ice again. Even though I only used that part from this unit, it seems it was the cheapest way to get the part, plus I have the rest of the unit should I need it in the future. I'm sure this saved me a bunch of $$$ compared to having a Sears repairman do it (probably about $300).

UPDATE 2012-07-28: Still making ice & working great.

Buy Whirlpool W10190965 Icemaker for Refrigerator Now

The ice maker replacement works fine. Note that our frig requires a different ice guide. That's the big white piece in the front. This part has a flat front but our OEM had a ramp guide. Without the ramp guide, your ice will eject all over the place inside your freezer. I was able to completely disassemble the old and new unit to replace the ice guide with the OEM guide. Pop the cover on the left side, remove the two silver screws only that hold the ice-tray to the motor assembly. Do not take apart the motor housing screws! Once the two screws are out, you can separate the tray assembly from the motor housing to replace the guide.

Read Best Reviews of Whirlpool W10190965 Icemaker for Refrigerator Here

Great buy. Looked every where for this replacement part, but could not purchase for under $75.-$80.00. Found it on Amazon and got it for less than $50.00. Great buy with good service.Came in a short time and was easy to replace.. works wonderful...Thanks again..

Want Whirlpool W10190965 Icemaker for Refrigerator Discount?

Easy to instal, made ice very quickly and over all this has been a very good purchase.

Half the price on amazon then I could find it in town for.

Save 42% Off