Avanti 1.7-Cubic Foot Beer Dispenser, Black W/Platinum Finish Door

• Dispenses 5 liter kegs
• Compact size
• Compressor cooling
• Adjustable CO2 regulator
• Holds two kegs

I have been saving for a personal 5L beer keg dispenser after seeing all my 'cool-friends' with the Heineken Beer-tender, but the reviews on their life-span turned out to be true (they quit if you keep a close to empty in the unit for more than a day or two) and I wanted something that operated differently.

I love this machine for the most part, and am working on making adjustments to the parts that are a miss for me. I love that it holds 2 x 5 Liter kegs and the accessories that come with the machine will allow you to use virtually ANY 5L keg style out there: Co2 pre-charged kegs like Heineken and Newcastle as well and any un-charged keg. The fact that this is an actual fridge protects the item from conking out because of a no-load melt-down like the other dispensers I have experience with.

Now the misses on this unit; this is a fridge and it boasts a glass shelf to chill your beer glasses. This is included and a really cool idea, however the shelf is way to close to the top of the chiller for anything taller than a shot-glass and so is pretty much useless for any practical use. Maybe someday I'll find some glasses that fit in there but right now I just can't make it work.

Next miss, and this is the biggest one; the pour spout looks very large and so you would think the flow of the brew would be almost as fast as a bar tap. Unfortunately this was very far from reality. The handle uses a 3/16" ID vinyl tube identical to the kind used in an aquarium aerator pump. The pour is excruciatingly slow! The tap handle works by pinching the tubing within the plastic spout but there is room for a slightly bigger tube. Today I went to a local hardware store and picked up a 1/4" ID vinyl tube and installed it,(after sterilizing) this helped quite a bit but is still way too slow for my taste. The speed is slower than the included tap on a Heineken 5L for reference. I will continue to work on this and it is usable, just a sticking point for me but NOT a reason avoid this machine.

The LED light is a cool idea, but that is about as much effort as they put into it. The light can be seen if you look through the window, but doesn't light up the fridge interior unless all the external lights are off in the room. In fact I forget it's on some times and leave the room because I can't tell that it's doing anything by just glancing at it. LED's run cool and it's a great idea, just no follow though on this.

The temperature adjustment is very cool(no pun intended) and even though the fridge settings bottom out at 38 degrees, the fridge is normally sitting at 36 degrees making very tasty beer.

The door is not reversible as described in the product features, the latch is molded on the door and cannot be opened from the right side.

Co2 control seats well and is easy to setup and adjust.

Overall I am really pleased with this product and do recommend this to others as a more reliable alternative to the Beer-tender, but I recommend it most for those who are home-brewers and aren't afraid to 'tinker' with the tap handle to get a better flow. I am most excited about the home-brewing aspect of this products versatility, as I myself have just started a batch of Oktoberfest home-brew and just ordered a Keg 5 Liter Party Keg with Tap for Homebrew and am beyond excited to have my brew on tap for my friends instead of passing out bottles.

Buy Avanti 1.7-Cubic Foot Beer Dispenser, Black W/Platinum Finish Door Now

I bought this on a whim. I had been thinking about putting my homebrew in kegs but didn't want to deal with the expense and complication of a kegging system and a kegerator. As I looked at this I saw that it could substitute for the mechanics of that system as long as I could get my homebrew into mini-kegs. The good news is that it can be done, the bad news is that mini-kegs seem to be in high demand and low production so there will be a wait for the empty kegs to get started. In the mean time I have substituted a pre-made mini keg. I chose one that is not of the pre-charged variety (Heinekin, New Castle) as my own will not be pre charged.

The good: The setup was easy and installing the first mini-keg was as easy as tapping and putting in the fridge. There is space to keep some glasses on the shelf, although not much, to have a chilled vessel to contain your brew. The unit looks sharp and will give you some bragging rights when your buddies are over for football. The ability to store a spare is a great feature. It is pretty cool to have a nice, cold, draft beer from the comfort of your family room/man-cave.

The not so good: The draft tube to the front of the unit is a pretty small diameter. It takes about a minute or so to fill a standard pint glass. This isn't a deal breaker, but when the previously mentioned buddies line up, that pour time takes the shine of the apple, a bit. The unit looks sharp, but on closer inspection, chrome parts turn out to be shiny plastic and the unit overall has a bit of a cheap feel.

The bad: The unit is noisy, not off the scale, but distracting when it kicks on during a movie. The regulator system is SUPER cheap. I had to add an o-ring to keep my cartridges from losing pressure (I wasted 3 in 3 days before I figured it out). The knob to adjust the pressure just keeps going tighter, sometimetimes with no result, other times by over presurizing the mini.

I would say that overall this unit will perform as advertized, just don't expect to be blown away.

Read Best Reviews of Avanti 1.7-Cubic Foot Beer Dispenser, Black W/Platinum Finish Door Here

Picked up mine last year post x-mas. Still love it!!! Do have some difficulty in NJ finding gravity kegs though. I keep two kegs in it at all times...usually a Heiniken or New Castle and then another that is run off of the coolers co2 system. I have found the 9oz co2 canisters work the best. The 16 grams tubes tend to leak unless u apply a little pipe tape. I was surprised that the 16g are not threaded, it would work much better.

Was originally drawn to the unit for its 2 keg size and because the cooling system is actually run off of a compressor and not a thermal cooling plate. Had one of them a few years ago and it burned out pretty quickly as most of them seem to do.

All in all it seem to work like a charm...highly recommended!!

Want Avanti 1.7-Cubic Foot Beer Dispenser, Black W/Platinum Finish Door Discount?

I've had this product for over a year now. I got it because I am a homebrewer, but don't have the space in my apartment to go to a full 5-gallon keg sytstem.

Don't bother trying to use the 16 g CO2 cartridges the o-ring seal on the attachment-nut piece is cheap, and will not properly seal the cartridge. Therefore you'll go through tons of the cartridges, and wind up with a lot of flat kegs of beer. I use a standard 12oz and 20 oz paintball canister that you can get at Dicks or off of amazon which scews into the regulator directly. You can still get the 20 oz canister to hang from the hangar on the inside of the door but you won't be able to fit two kegs.

The faucet that comes with the unit works fine the tubing is 1/8" ID, which does make for a deliberate pour, but smaller diameter tubing can also help to reduce foam. I wound up modifying the door so that I could install a bar-quality tap faucet from a homebrew supply store and use cornelius-style kegs (also from a homebrew supply store), but the existing faucet gets the job done.

The one thing that I can't modify is the noise that this thing makes when the compressor kicks in. It is very noticeable, especially if you have it in a room where you watch tv.

Overall I am happy with this product, it only gets three stars because the 16 g co2 cartridge option just doesn't work reliably, and the noise.

Save 38% Off

I ordered one of these units with an adapter for non-Heinekin kegs about two weeks ago. It was easy to set up and looks pretty much exactly like the the picture.

PROS:

The refrigerator is large enough to hold two standard-sized mini-kegs. If you mix up 5-gallon batches like I do, that's enough to store about 2/3 of the total batch. I force-carbonate and bottle the remaining beer.

My unit is relatively quiet and unobtrusive and the temperature controls work well.

It's small enough that I can move the unit to a different room if I want it to be available for a party.

CONS:

The regulator is TERRIBLE. The plastic knob of the regulator valve came off of its threading the first time I used the system and I had to superglue it back on. Then it broke off again a week later. The regulator also immediately developed a fairly serious leak, so I was blowing through CO2 cartridges. I eventually got a better regulator and the system works fine. However decent regulators are relatively pricey.

The system doesn't carbonate the first third or so of a mini-keg very well. There tend to be a lot of foamy bubbles that dissipate quickly and leave the beer slightly undercarbonated (but still quite drinkable). A lot of this probably has to do with the small exit tube attached to the tap. If the tube had a larger diameter, the fluid would exit less quickly and the beer wouldn't decarbonate as much.

All in all, I'm glad I have the dispenser because I don't make enough beer to warrant a full-size kegerator and the mini-kegs that this system uses are perfect for my needs. However, I would have much rather paid a few extra dollars to get some high-quality force-carbonation parts instead of the cheap regulator and tubing that came with this system. If you buy this system, you may have to tweak it with extra parts in order to get it to work to spec.

LG LT600P-2 Refrigerator Water Filter, 2 Pack (Part Number 5231JA2006B)

I ordered the two pack with Amazon as the seller, and got the correct "B" version (not the cheaper "A").

Works fine in our Kenmore fridge.

Amazon's two pack was the lowest per filter price I found online anywhere for a real "B" version.

I received the correct part. The "B" filter. Installed easily. Many of the reviews for this product reveal an issue Amazon has. Not everyone who is reviewing this product got it from the same company. I ordered it from Amazon. Not a third party vendor. Also, why worry! If your are not an Amazon Prime member you should be! The shipping is free both ways. If Amazon makes a mistake on your order you simply go to the returns area and print your FREE return label. So come on folks. Read!

Buy LG LT600P-2 Refrigerator Water Filter, 2 Pack (Part Number 5231JA2006B) Now

You get what you pay for. The water out of this filter is fantastic and it is a perfect fit. Seems way over priced, but the quality is worth it.

Read Best Reviews of LG LT600P-2 Refrigerator Water Filter, 2 Pack (Part Number 5231JA2006B) Here

DO NOT BUY THIS PRODUCT!

The package came with no receipt or any kind of printed copy of my order and with just one filter inside. The amazon packaging was well wrapped and did not seem to have been violated in any way but the actual product package was not sealed (looked like it was a re-packaged product) and only one water filter was available.

For 99$ this is completely unacceptable!

Want LG LT600P-2 Refrigerator Water Filter, 2 Pack (Part Number 5231JA2006B) Discount?

The filter fit and it worked perfectly, I am very happy. And I will consider buying these filters again. Thanks

Maytag Maxima 4.3 Cu. Ft. Gray Front Load Washer - MHW6000XG

This Maytag Maxima 6000 series washing machine is one incredible piece of hardware. Our clothes have never been cleaner and more wrinkle free.

Our 12 year old Maytag Neptune stacked washer / dryer died an ugly death two weeks ago. The washing machine stopped spinning, it could have been a control board, or a wax motor; but no it turned out to be the bearings. Why did I stick with Maytag on the replacement? 12 years, two service visits, and a machine that worked flawlessly for a first generation stacker front loader. I was pleased with the service.

The key points about this machine it is quiet (not dead silent, but it makes a good solid big heavy motor sounds), it has some sweet features, it looks cool, and it has a big wash drum. Until we got it home, I had no idea it washed clothes this well.

The following review was originally posted for the white version of this washing machine. There is no difference between these washers except for the exterior color.

There's two models in this Maytag Maxima line the 6000 and the 7000 series. The 7000 adds a few cycles, the steam power wash, a separate dispenser for OXI clean products, and an LED light inside the drum. At first I was kind of disappointed I didn't buy the 7000, hey I'm a guy and I love extra functions and the light inside the drum just seems so darn cool. Now that we have this 6000 model, I'm perfectly happy with the choice. There's about a $200 difference between the models. It's not clear how often we would use the steam (frankly, probably never). The light is way fun the first few days of playing with the machine, but long term, not so useful. Besides, the door is so huge and with the smoked glass, I can still see inside the machine. OXI clean dispenser well that would never be used, and the 6000 instructions describe how to mix it with the regular detergent.

The washing machine requires at least a 15Amp 110V circuit, cold and hot water, and a waste line. It's possible everybody knows this, or this is standard for a washing machine. Well for me this was a huge horrible surprise; our Neptune stacker used one 220V connection. I have to run a new 110V line to power this machine.

This machine looks pretty darn intimidating at first glance. The instruction manual is about twenty pages and is also somewhat intimidating. But never fear it is really super simple to operate. The big silver dial in the center, turn it to select the wash cycle. The black panel on the right displays approximately how soon the cycle will finish (sorry, it's a countdown timer). The three buttons at the bottom of the panel are used to over ride the wash / rinse temperature, the amount of wash time, and the spin speed. The buttons all the way to the right control convenience settings like tone at end of cycle, hold clothes, maximum extract, and extra rinses. One other minor control on the black panel this washer can delay start the cycle. There are two very simple + and buttons on that panel that set how many hours delay time.

On the far left is the detergent drawer. I love this part of the machine no more tossing the detergent in the bottom of the drum or going after hidden bleach or fabric softener reservoirs. Slide open the drawer on the left side to add the detergent. There is a setting for powder or liquid detergent. Basically the little switch moves a plastic stop up for powder (allowing freer flow of water to add detergent during the fill cycle) or down for liquid (restricting the flow so the liquid won't immediately flow out and assuring the liquid gets mixed properly with the water). To the right are fabric softener and bleach reservoirs. The machine is super smart, at the right moment during the wash and rinse cycles it forces water through the correct reservoir to deliver the product. The drawer can be removed easily for washing (at some point mildew could grow in the softener side a huge problem in our old Maytag). It is not dishwasher safe.

How to use this beauty? Load the clothes. Select the cycle and adjust options (when the silver dial is turned the machine automatically powers up, no need to monkey with the power button). Add detergent. Close the drawer, and press the start button. The count down timer gives an estimate for how soon the load will be finished. The instruction are specific that this is an estimate the cycle could take more time due to unbalanced loads or too much foam from the detergent.

There is a red Add Clothes illuminated on the panel when there is still time to press the play button to pause the machine and toss in a few forgotten items.

There are enough cycles on this machine to make everybody happy. Two pages of the instruction manual are devoted to the finer points of each cycle, and how full the drum should be. There are a few highlights in the world of cycles. There is a power clean cycle, which actually heats the water of the final rinse enough to meet NSF standards for killing bacteria and allergens. There is a swimsuit cycle that simply rinses and spins the load, in addition to a spin only cycle. The normal cycle is preset to last 56 minutes and does warm wash with warm rinse. The hold setting is interesting. If this option is selected, when the cycle is finished, the machine tumbles the clothes frequently, and blows air into the drum to keep clothes from wrinkling.

Fabric softener isn't added until the very last rinse, no matter which cycle or extra rinse was selected. Bleach is added at the first rinse.

There is some kind of tie in with Affresh cleaner; the machine has a clean Affresh cycle. After a certain number of cycles, a clean light will illuminate. At this time the machine is asking for a clean cycle a 45 minute cycle where no clothes can be in the machine and add either an Affresh tablet or bleach to the bleach dispenser. I understand there were so many complaints of mildew growing in these front-loading washers; Maytag has decided to take a proactive approach to eliminating the problem. I've used Affresh in our old machine and it does work well. At about $8 per three tablets, it's not a horribly expensive prophylactic.

Whirlpool W10135699 Affresh High Efficiency Washer Cleaner, 3-Tablets

Maytag does say to use HE (High Efficiency) detergent. There is some truth to foam causing early failure of the drum bearings regular detergent foams a lot more than HE and causes significant drag on the drum motor and bearing during the spin cycle. There is also some leaning toward powders over liquid detergent. If you love liquid, just pay attention to the detergent drawer to be certain no soap residue builds up, (it's easy enough to remove and wash).

The drum is beautiful (yes I love mechanical things) stainless steel. There are no big bumps in the drum to hold socks or other clothes up at the top of the drum. The drum is huge. A set of queen sheets and pillowcases only fill the thing halfway (that used to almost fill the old Neptune).

This is a flexible machine for installation. Since all the controls are on the front panel, there is a ton of ways to install this machine. Standing all by itself, the top is a great place to sort clothes or fold after they are dried. If the 6000 series dryer is used side by side, the two machines make for a great space to work. There is also an option to place a shelf over the top of the two machines. The machine can be installed under a counter just like a dishwasher. There is a stacking kit to put the dryer on top (when the dryer arrives, that's the configuration we are using). There are specifications for putting this in a closed closet (upper and lower vents are required in the door).

There are three colors white, red, and dark gray / silver. I went with basic white, it was available. The red is actually pretty darn cool looking; it is a nice deep red, and honestly not far off from Ferrari red. The gray / silver is pleasant.

How long will this machine last? I hope somewhere near what the previous machine did. The machine comes with a one year full parts / labor warranty. There's a five-year warranty on a few of the major parts, including that moist fan thing. And finally ten years on the drum and big stuff. After one year no labor is covered. There is the crime, the parts are expensive, but the labor to install them will probably still be out of sight (read, just replace the thing if the bearings go out). I would guess Consumer Reports has an opinion on this machine, and Maytag in general. It's impossible to tell what Maytag did with the electronics. I hope they learned their lesson with the Neptune series and have built robust controls.

I love this machine. Our clothes are super clean and they come out of the washer well wrung out to shorten the drying cycle. Pictures don't do this justice. It is a very pretty machine. It looks a little like the Jetsons go ahold of it.

I was initially drawn to this machine by it's looks, but bought it for ease of use. Samsung and LG consistently get high marks but in everyday use they drive me nuts. For those not familiar with the Asian design aesthetic, it basically goes like this: More buttons + more blinking lights + more beeping noises = more better. Well, in the words of Stan Marsh, "I thought this was America!" It is, Stan, and this one is actually made in America too.

The controls are simple, just go from left to right. Set the mode, modify the default settings if you want, throw in some bonuses (like extra rinse), and press play. I did not really need to read the instructions to figure it out, and the silly noises can be turned off. Another nice feature is the design of the soap tray. The whole tray gets rinsed, and that prevents old soap/bleach/softener from building up.

A major reason for the increased efficiency of front loaders is the faster spin cycle that extracts more water and shortens the drying time. This one actually spins fast enough to completely dry some items like polyester. While this washer is quiet I can hear it switching cycles, although it makes up for that by not whistling a tune every few minutes like some others. The biggest knock I have is that there is no "quick wash" mode, the closest thing is the "small loads" mode that takes 44 mins. Normal modes take a typical 1 to 2 hours, and the dryer is always left waiting.

If you are buying this as a set like I did, the features of the washer and dryer to not really match up. Unlike the 6000 dryer, this washer DOES NOT have a steam cycle and interior light, you will need to step up to the 7000 for that (you also get more wash modes). Also, unlike the dryer this washer DOES come with all of the required connectors (4' hot and cold water lines, and a drain line).

Buy Maytag Maxima 4.3 Cu. Ft. Gray Front Load Washer - MHW6000XG Now

I bought a Maytag Maxima MHF6000XG front-load washer. Everywhere I looked, it was $1199, sometimes on sale for $100 less. I found Gochnauer's on Amazon in a google search, and they listed it for $598, brand new. Since they were within 100 miles of my home, there was a $129 delivery fee. I rented a van and drove straight out to them, completely skeptical. I arrived, everyone was friendly and helpful, and they loaded a brand new washer into my van with a forklift (no extra charge). They then refunded the $129 delivery fee since I picked it up. How did they do this? I have no idea, but holy cow was it a great deal......brand new and half price. Thanks guys!

As to the washer itself, this is my first HE washer, first front-load, and first experience with digital controls, 'smart' washer technology, etc. However, our washer was damaged in a basement flood, and it took me almost three weeks to find this one, so by the time I had it installed, I immediately ran over 20 loads of wash throught it.

Overall I am very happy with it so far. Clothes get clean, are very dry right out of the washer, are not all wrinkled, and smell fresh. There is very little water used, and while it takes much longer than a standard top-load washer, the total time, due to reduced drying time, is not dramatically different. With no agitator, it's more gentle on clothing as well. It's pretty quiet, even when spinning at eleventy billion RPM. The stay-fresh thing is nice for when you can not get back to the washer to move clothes to the dryer when it's done.

The downsides I've noticed are that the opening in the rubber gasket that seals the door must be wiped out as it collects water and various objects that come out of pockets, and if you add liquid detergent/bleach/etc into the trays and then wait a while to start, the liquids will leak out onto the non-running dry laundry load. There is no option to spin-only, just a rinse/spin option which takes longer. And no light in the tub, only the next higher up model, the 7000, has a light (strangely though the matching 6000XG dryer has a light). Finally, the balance sensor can take a while to figure out when it's OK to spin at high speeds, adjusting how the laundry sits in the tub, which can add to total wash time.

I'd give it 4.5 stars overall, mostly because clothes are coming out cleaner and better smelling than my previous SpeedQueen washing machine, and the energy/water usage is much much lower. I remember even after two spin cycles in the SpeedQueen, with towels and jeans it would often take 75+ minutes to dry on high. The matching Maytag MED6000XG dryer has yet to take more than 35 minutes on low or medium heat no matter what I have attempted to dry, and that's because the laundry coming out of the washer is nearly dry to begin with due to the high-speed spin and lower water usage.

Bruce

Read Best Reviews of Maytag Maxima 4.3 Cu. Ft. Gray Front Load Washer - MHW6000XG Here

Frigidaire 215846602 Defrost Timer for Refrigerator

If you are reading this review, chance is you are smart enough to know how to fix your fridge. You are also dumb enough, like myself, to buy the fridge in the first place. True it was a cheap fridgem but it has been a hassle the freezer compartment has to been defrost to make the lower compartment cool. This is the second time to replace the timer, so who knows how soon I will need to replace it again. Amazon's service is good, and I am happy with them.

Installed timer. It fit perfectly and is working properly. I would recommend this service to anyone looking. Saved money versus going to a local appliance parts company.

Buy Frigidaire 215846602 Defrost Timer for Refrigerator Now

Not much to say. My heater stopped working, and I verified that the timer was not turning it on. Ordered this one. Works just as advertised and designed.

Read Best Reviews of Frigidaire 215846602 Defrost Timer for Refrigerator Here

Fridge would intermittently not come out of defrost cycle. Food would start to thaw in freezer. This little device fixed the problem.

Want Frigidaire 215846602 Defrost Timer for Refrigerator Discount?

Price was great, but sadly it only worked for about three months. Now I'm stuck because the warranty has expired.

Frigidaire 216916200 - FRIGIDAIRE REFRIGERATOR LARGE FREEZER BASKET

• THIS 216916200 FRIGIDAIRE FREEZER BASKET IS COMPATIBLE WITH MANY FRIGIDAIRE, CROSLEY, GIBSON

• TAPPAN, ELECTROLUX, WESTINGHOUSE AND KENMORE REFRIGERATORS/FREEZERS.

  DON'T LET SMALL ITEMS

• LIKE FROZEN JUICES OR ROLLS GET CRUSHED OR LOST. ORGANIZE YOUR LARGE CHEST FREEZER WITH THIS
• Works with the following models: Frigidaire CFC13M5AW4, Frigidaire CFC13M5AW5, Crosley CFC20LW0
• Frigidaire CFC20LW0, Crosley CFC25LW0, Frigidaire CFC25LW0, Frigidaire CFCH15LW0

What can I say? It fits my new 25' Frigidaire chest freezer perfectly. The three factory baskets are blue, this one is white. Other than that it is identical. We keep two on the left and two on the right, as the light assembly on the lid will hit a basket left in the middle. We use the new white basket for introducing new food into the freezer, then we move it where it belongs once it freezes. This prevents warming food that is already in there by laying unfrozen food next to it.

Buy Frigidaire 216916200 - FRIGIDAIRE REFRIGERATOR LARGE FREEZER BASKET Now

BASKET WAS TOO BIG FOR MY FREEZER.. TRIED TO RETURN IT IN THE ORIGINAL BOX.. COSTS MORE TO SHIP IT BACK THAN THE COST OF THE BASKET..THE DIMENSIONS GIVEN WERE INCORRECT SO BUYER BEWARE.. WILL PLANT FLOWERS IN THE BASKET--YOU WILL NOT GET ME AGAIN

Supco RCO810 Hard Start Kit

My small freezer was not working and the compressor appeared to be OK. Using this item to replace the suspect start capacitor, overload, and start relay worked well, was easy to install, and reduced the possibility I was replacing the wrong component. The freezer is now running well for over a month. I would recommend this, so long as you know the size of the compressor to match it to the proper kit.

The only disadvantage is there is no good way to mount the kit, which isn't a significant problem.

Save 54% Off

Evaporator Motor for Frigidaire 5304445861, 240369701, 5303918549

Our fridge stopped cooling on the top portion of the freezer side and the fridge side stopped completely. The bottom of the freezer side was still cold though. I did a little research on our fridge model and, given the symptoms and the models history, I was pretty sure that the evaporator motor was the problem. I ordered it while at work without taking the old fan out of fridge (a little risky if I was wrong.)

The new fan motor arrived "next day" which was excellent. For the past couple days we were keeping our refrigerated items in a cooler which is a pain. When you pull the milk out and everything collapses into its spot you spend several minutes just trying to put the milk back in so we did NOT want to wait to get the fridge fixed.

I had to remove about 16 screws out of the sides and back of the freezer (including removing the ice-maker which only had two screws holding it on.) That revealed the fan which was indeed not working. Here is where I had the most difficulty. There are three wires on the unit. One was the ground wire which was easy to pull off, but the disconnects for the other two wires were encased in a U shaped plastic piece. Pulling the plastic piece ended up ripping the disconnects off the old fan motor leaving them still stuck in the plastic U.

It took me several minutes to get the old parts out. I had to push the wires through the plastic U so the connectors were completely exposed, then discovered I had to use something with a sharp point and press through a tiny hole in the middle of the connector while pulling them apart before they would release. That little hole actually locks the pieces together with a little flap of metal. They should have put holes in the plastic U to make the job MUCH easier and to prevent damage to the motor connectors.

The new motor came with new male ends and some heat shrink tubing but I did not need either. The old connectors were still good. I had to pull the wires back into the plastic U and reconnect them. One caution, I had to bend the little locking flap back in on one connector before it would lock onto the new fan. Do yourself a favor and get it locked on BEFORE pulling the wires back into the U (assuming your fridge is the same as my Frigidaire). If you don't do that, you risk having a loose wire that may arc and go bad or you may be pulling the connector back off (like me) to fix the little flap, risking damage to your new motor.

The final problem I had was that there was a lot of "snow" on the top of the coils. I used a heat gun to melt the stuff from the top but I could not see the bottom of the coils because I saw no need to take that extra panel off. Big mistake. All it did was cause the snow to melt from the top, run down a ways and form a BLOCK of ICE further down. I started the freezer up without checking and the next day I was removing that "extra panel" because no air could get through the ice. It took me a few hours to melt all the ice off this time plus an extra day having to use the cooler.

Happily it is now running great! I hope this helps someone else do the job better/easier. It is an easy job to do if you watch for those pitfalls and it will save you a ton of money over paying a professional.

I have never worked on a fridge prior to today.

After doing some research on why my fridge wasn't getting cold I unplugged the fridge, removed the back panel inside the freezer and removed the shelves and brackets to access the old fan. As i suspected from my research the fan had burned out which seems to be a common occurrence. I ordered this replacement evaporator motor on Amazon for a 5 year old Frigidaire Model # FRS26LF7DSB. The price ($26.00) was less than half of what it would have cost ($60.00) on other "replacement parts" websites. I ordered the item on a Monday at 4:55 PM and had it sent overnight for an extra $20 = total of $46.00. The part arrived by 3PM on Tuesday and it took no more than 15 minutes to install. The old motor had wire connectors that could be pulled off. Once this was completed I removed the fan blade and the old motor from the motor housing and inserted the new motor and attached the fan blade. Total time thus far under 5 minutes. The new motor has the same wire connectors as the old one so I just reconnected the wires and put the housing back in the freezer and gave her a try. As soon as I plugged in the refrigerator the motor/fan came on right away. I then unplugged the fridge. Reattached the back panel and shelving brackets/shelves and was done. Total time was under 15 minutes.

If you have the same problem it is an easy and inexpensive fix.

Buy Evaporator Motor for Frigidaire 5304445861, 240369701, 5303918549 Now

I've never replaced an evaporator motor before, but was very pleased to find the part I needed available for Prime shipping, and with a corroborating reviewer who stated that this was great because it had all the necessary connectors to just snap in the new motor. Well, not so about the one I received. It in fact came with no wires at all (though it did come with something which might be splicing caps, though I truly don't know what they are). I cannot even test it to see if it works.

In fairness -it is exactly as pictured, with no wires attached, just not as another reviewer described. It is totally useless to me.

Read Best Reviews of Evaporator Motor for Frigidaire 5304445861, 240369701, 5303918549 Here

Product showed up on time. This motor matched my fridge exactly and I could just un plug the bad motor and plug this one in. I purchased a replacement motor from a local dealer but to install it, I would have to splice wires on the connector side and on the motor side. This eliminated all if that.

I installed this n about 10 minutes and it has been working flawlessly for a month. I hope it will be at least 10 years before I need another.

Want Evaporator Motor for Frigidaire 5304445861, 240369701, 5303918549 Discount?

This is my second time replacing this motor hopefully this one will last longer than the last one I purchased (lasted 13 months).

This is a different make than the previous fan I purchased so we will see. The only reason I didn't give 5 stars is because I am gun shy after the last replacement motor I purchased.

It is plug and play and extremely easy to change.

Maytag MBF1958XEW EcoConserve 18.5 Cu. Ft. White Bottom Freezer Refrigerator - Energy Star

• 5 Spill-Catcher Glass Shelves
• Gallon Door Storage
• Glide-Out Freezer Drawer
• Energy Star Qualified
• Factory-Installed Icemaker

Had this fridge since Dec 2011 and so far I am satisfied. We had a larger fridge before but I wanted one like this because of my back problem. It seems to hold as much as my other one as long as you organize items according to size and frequency of use. Is very accurate for temperature control as I have placed thermometers in both the freezer and refrigerator. I noticed that my vegetables seem to stay fresher which was a pleasant surprise. I do enjoy being able to open the door and see what I want so much easier than bending over to search

in the dark back reaches of shelves. I find that I don't "loose" leftovers so easily only to find them later spoiled because I forgot they were there. The roll out freezer is so easy to use and even though the icemaker uses alot of space, I work around that by not filling the ice tray completely full and putting some items that are securely packed in the ice bin on the front side..no problem. When items are packed in a box from the grocery, I remove the box and use freezer bags to save space. If you buy alot of boxed prepared foods like dinners and such this freezer may not serve your needs. The glass shelves are easily cleaned as well as the outside. It runs fairly quietly except when it makes ice.

Update: 12/5/2012

Still enjoying this fridge. Just hope it stays trouble free.

Buy Maytag MBF1958XEW EcoConserve 18.5 Cu. Ft. White Bottom Freezer Refrigerator - Energy Star Now

We purchased a Maytag refrigerator in July of 2012. It quit working in October. Maytag repairman did not have the replacement compressor that was needed. Home Depot brought us another refrigerator 10 days later. That refrigerator worked until the beginning of May 2013 (7 months later). Home Depot brought us another refrigerator 7 days later. We contacted Maytag after we received the new refrigerator and they were not willing to send us any compensation for aggravation or loss of food. Their customer service to say the least is non-responsive. We will never buy another Maytag refrigerator and we tell everyone we know not buy a Maytag refrigerator. Maytag had to know these refrigerators were defective and they should have recalled them. Home Depot Appliance manager told us there were multiple customers who had issues with these refrigerators.

There are many manufactures of appliances and our advice would be not to buy maytag!

GE WR38X10348 Recess Trim for Refrigerator

I broke the plastic surround on our fridge when I was installing the water line heater (%^$%^%# you GE for not making that heater standard!). This one is a perfect replacement and looks just as OEM as the original.

I broke the one on our fridge so I needed to replace it. This is an original part from GE and fit perfectly.

Buy GE WR38X10348 Recess Trim for Refrigerator Now

Bosch : B36ET71SNS 20 cu. ft. Integra Series French Door Refrigerator - Stainless Steel

• Dual compressors and evaporations for optimal humidity and odor control
• Keep food fresher in humidity controlled crispers and full-width deli drawer
• Hidden hinges let you open fridge doors without banging cabinets
• Get maximum storage from large capacity freeze drawer
• All drawers are fully extendable for easy access to food

I checked out this refrigerator and it is fantastic. I was about to buy it when I realized it cost the same as 6 mortgage payments on my house. Then I decided my old junker of a refrigerator works just fine and it's paid for.

WSO3X10038 Water filter O-Ring for GX1S01C, GXRM10GBL, GXWH04F, GXWH20F & GXWH20S

The package came promptly, but the O ring did not fit even though it was the specified sizeWater Filter Housing Replacement O Ring for GE Filter 2.5 Inch

This O-ring did not fit on my GE filter. I checked the model number and it was listed in the item description but the O-ring was too big. What a waste of time.

Buy WSO3X10038 Water filter O-Ring for GX1S01C, GXRM10GBL, GXWH04F, GXWH20F & GXWH20S Now

Purchased for GE GXWH20F and didn't come close to fitting. Way too thick to fit in groove. Unfortunately, you don't find out until the old one needs replacing. PURE CRAP!

Read Best Reviews of WSO3X10038 Water filter O-Ring for GX1S01C, GXRM10GBL, GXWH04F, GXWH20F & GXWH20S Here