PWFRG357 Replacement O Rings For 4.5 Inch Housing

When I initially ordered the o-rings, I was shipped the wrong size. However, when I sent an inquiry to the vendor, they asked for a photograph of my RO system, and were able to determine the correct size O-ring from the the photograph! The new o-rings were shipped the next day, along with a post-paid return for the rings that were too large.

Maytag UKF7003 PUR PuriClean Cyst-Reducing Refrigerator Water Filter, 1-Pack

Few days back I ordered this product; and it was delivered in 3-4days. The installation was super easy with the given instructions. Planning to order the same in few months again!!

The only reason I am not giving 5/5 is due to missing instructions for turning off "Change Filter" light; I found these instructions on some blog. For MayTag refrigerator, the light can be turned off by holding "Light"+"Lock" pads on the door until the "Change Filter" light blinks (approx 4-5 seconds).

My original filter was a UKF7002 and locked with a click when in place. This is the replacement UKF7003 and while it does fit and seems to have no leaks it does not lock in place when inserted.

Buy Maytag UKF7003 PUR PuriClean Cyst-Reducing Refrigerator Water Filter, 1-Pack Now

This water filter changes easier than the oil filter in your car engine. I was afraid that water would spill as I changed the filter. The old filter counter turned without a drop of water spilled. The new filter went in even easier.

Read Best Reviews of Maytag UKF7003 PUR PuriClean Cyst-Reducing Refrigerator Water Filter, 1-Pack Here

This filer seems to work fine. I think I noticed the water had a bit of different taste, but it could very well have been my imagination.

This filter is a bit smaller than the original Maytag filter and smaller than the Brita filter I ordered through amazon.com last year. These were both 1 year filters and I am a bit disappointed that this is rater for 6 months.

I paid about $25.00 for the Brita a year ago and now see it is $38.00. Is there a water filter shortage I am not aware of?

Anyway, look at the Brita MYRF-100 Refrigerator Replacement Filter filter for a few dollars more and rated to last a year.

Want Maytag UKF7003 PUR PuriClean Cyst-Reducing Refrigerator Water Filter, 1-Pack Discount?

The filter is great, but the advertisement was misleading. To me and everyone I ask, a pack is more than one.

Save 34% Off

GE REFRIGERATOR CONTROL BOARD WR49X10152

• If insure, please ask your seller if it fits your model

it works now. But not a well as it did when it was new.The freeze still will go up and down as much as 3 degrees .

Buy GE REFRIGERATOR CONTROL BOARD WR49X10152 Now

I had my local appliance repair guy come out to diagnose what was wrong with my fridge. He said my control board was out and wanted twice the amount I spent on this board. I got the part number and ordered it myself. I watched a few DIY videos on installing the board and presto!!! It was installed. the fridge is working fine so far and its been a few months. Saved me about $150 bucks!!

Read Best Reviews of GE REFRIGERATOR CONTROL BOARD WR49X10152 Here

Genuine GE product I believe, for a great price. Got it Installed by a professional. Fixed all my fridge problems.

Water Sentinel WSL-3 Water Filter Replaces LT700P, ADQ36006101, ADQ36006101-S, ADQ36006101S, ADQ360

• Economical alternative to expensive substitutes
• Delivers clean, clear water that looks and tastes great
• Will remove or reduce Chlorine, Tastes and Odors that may be present in your drinking water
• Designed to provide up to six months of life or 200 gallons

Price was great Sears wanted 3 X the price for the same filters even with my 20% discount from purchasing an extended warranty. You get 2 filters

Buy Water Sentinel WSL-3 Water Filter Replaces LT700P, ADQ36006101, ADQ36006101-S, ADQ36006101S, ADQ360 Now

we have an LG fridge and this is a perfect alternative to the expensive "brand names." definitely recommend this as a sturdy replacement that clicks in as easy as the others.

Read Best Reviews of Water Sentinel WSL-3 Water Filter Replaces LT700P, ADQ36006101, ADQ36006101-S, ADQ36006101S, ADQ360 Here

I am giving this five stars because I see absolutely no difference in the way this performs versus the more expensive name brand. Fits the same, water tastes the same...and that is a good thing. These filters cost less and work just as we'll.

Want Water Sentinel WSL-3 Water Filter Replaces LT700P, ADQ36006101, ADQ36006101-S, ADQ36006101S, ADQ360 Discount?

Product was delivered fast and was very easy to install. Just put a small bowl under the filter to catch the extra water when you take the old filter out.

I replaced the one that came with a Kenmore Elite and don't notice any difference. That's a good thing! Delivery and packaging was perfect. Couldn't ask for more.

Supco RIM597 Replacement for Whirlpool 2198597 8 Cube Icemaker

From the box into refrigerator and is working since then ( one month).

Great price. I don't know yet how long is going to last ,hopefully for ever.

Ours went out and my handy man hubby ordered and installed it worked! Saves us money from having an appliance man out. Easy instructions and easy install.

Buy Supco RIM597 Replacement for Whirlpool 2198597 8 Cube Icemaker Now

Works great. it makes ice as it used to in the past. it was cheaper than form manufacturer. Thank you

Read Best Reviews of Supco RIM597 Replacement for Whirlpool 2198597 8 Cube Icemaker Here

Installed in 2 min, easy cheesy.

Half the the price of OEM,

Looks as if it came from same factory with different name.

Want Supco RIM597 Replacement for Whirlpool 2198597 8 Cube Icemaker Discount?

Received part on time and had the ice maker in my refrigerator up and working in about ten minutes. Definitely recommend.

Save 13% Off

Keggermeister KM2800BK Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Black

• Full-size single-tap beer dispenser keeps beer fresh for up to 3 months
• Accommodates a full-size keg, pony keg, or 2 5-gallon kegs
• Adjustable temperature control; 3-sided chrome guard rail around top work surface
• Smooth-rolling casters; UL-approved for commercial use; CO2 bottle included
• Measures 25 by 21 by 49 inches

The Keggermeister Kegerator comes packaged in double "double walled" boxes with a lot of Styrofoam packaging materials and materials. All of the minor components are neatly organized in a separate box inside of the Kegerator fridge. After removing all the pieces and laying them out, I began to read the instruction manual. The manual content is very clear and concise with well illustrated pictures on the assembly of the unit and pieces. The box was undamaged in shipping

Assembly is fairly simple, anyone with basic knowledge of hand tools should have no problem. It takes about 20-30 minutes to get it put together and running, the one thing I would advise any owner is to take your time and learn the pieces of the dispensing system while you assemble it. This is critical in understanding how everything works in order to be able to trouble shoot any issues should they arise.

The unit comes with a 2.5lb C02 tank that I was able to get filled up for less than ten bucks. I recommend a local paint ball shop since they are better equipped to fill this size of tanks up. Welding supply shops also work.

Once everything is assembled and it was plugged in it turned right on and gave a silent hum as if to let me know it was on. Even with the compressor cycling on and off it still maintains a very minimal noise level.

After allowing the refrigerator to operate with no keg in it for 24 hours I decided to give it a test drive. The first keg used was a Full Keg of Budlight. After letting the Keg sit and cool in the Kegerator for another 24 hours it was time for the first pour which resulted in nothing but foam. After doing a bit of trouble shooting I realized I had opened the valve on the C02 tank all the way for max flow. This resulted in over pressurizing the keg. To fix this I closed the valve and adjusted the regulator to having it near closed. I then pulled the pressure release pin on the coupler releasing the built up C02 in the keg. The next glass I poured came out perfectly pure golden bliss with a decent layer of foam.

About 40 minutes layer I tried to fill up a pitcher of beer and was presented with a near perfect pour. This was more than enough of evidence that there was a consistent pressure and was at an optimal level for consistent pouring.

The exterior has a nice black matte finished that goes well with any décor. The chrome guardrail and stainless steel spout add a nice touch to the overall exterior of the unit. Cleanup is easy and was simple with just a bit of standard surface cleaner. I was also able to change out the tap handle with a standard Brewing Company handle.

Keg's that have been run through this unit: Pyramid Hefeweizen, Budlight, Budweiser, Dos Equis

Buy Keggermeister KM2800BK Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Black Now

I ordered this this product three weeks ago and would give this ZERO stars if possible. The first one that shipped (7/19/10) to me had a defective spout that did not lock into place. I called amazon on Tuesday 7/20/10 and they were extremely helpful. Amazon had a new one shipped to me two days later on a Thursday 7/22/10. I Assembled the keggermeister on Friday 7/23/10, plugged it in on Saturday 7/24/10 to see if it worked...and it did!!! On Wednesday 7/28/10, I bought a keg of Dales Pale ale and had the CO2 tank filled and set the kegger to the "med" setting and put a few bottles of beer inside. By Friday 7/30/10 the CO2 tanked was completely empty because there was a leak in the hose, the bottles of beer were completely frozen, and the Dales pale ale tasted stronger then normal. I had the tank refilled on Saturday 7/31/10, replaced the hose, and turned the kegger all the way down to min. On Sunday 8/1/10, I went to go and get a beer and nothing came out...I thought that was kind of strange so I unhooked the keg to see if it was tapped and it seemed there was no beer left but still on the heavy side...so i left it outside and turned the kegger off. On Monday night 8/2/10 when I got home from work, I wanted to go and return the keg at the liqueur store, but when I picked it up, there was still beer...and ICE in it. So on the lowest setting on the kegger froze my beer! Today is Tuesday 8/3/10 and I am going to contact Amazon and return the keg. DO NOT BUY THIS PRODUCT!!!

Read Best Reviews of Keggermeister KM2800BK Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Black Here

Doesn't keep pressure correctly. Had to get a new regulator with 2 guages on it. Keg and co2 tank barely fit inside. Waste of money.

Want Keggermeister KM2800BK Kegerator Full-Size Single-Tap Beer Refrigerator and Dispenser, Black Discount?

I bought the stainless version despite the negative reviews and I'm happy I did. I unpackaged the kegerator, which was a challenge because there was about 4 layers of cardboard/padding protecting it, and let it sit unplugged for about 12 hours since it was laid on its back. Read the directions, which dont give the best pictures but there are also some great vids on youtube, and had everything assembled within an hour. Came with a dual pressure regulator even though the directions show one, which is a huge plus. Comes with doubles of ALL O-rings and small parts

But you get what you pay for -

Tap on tower doesnt stick straight out at you (might be a fluke on mine. Its about a 4:00 spot)

Tower wont spin and lock if rubber gasket is used. Not a problem but it the principle of the matter

Max Cool temp is about 42*F

I'm happy with it and for less than $500 shipped to your door its a hard bargain to turn away

Save 35% Off

I would give this zero stars if possible, this kegerator doesn't get below 40 degrees even on the max setting. My first keg i bought was a five gallon keg, half of it was easily wasted because of foam, then a few days later out of the blue i start getting perfect pours. I didn't adjust ANYTHING i had a glass of water at the bottom of the kegerator with a thermometer in it and it was still at 40 degrees, so i know that the temp inside didnt change. the psi was the same as well (according to the regulator that comes with the unit)So when i finished my first keg i bought my second one, waited 24 hours before using it and still got 100% foam, i have adjusted the co2 pressure numerous times, i cleaned the lines before i put my second keg in, yet the best pour i ever got was about 2/3s foam. The faucet on the tower is now loose as well and falling out of the tower. The keg coupler also leaks CO2 out of the pressure relief valve, causing my CO2 tank to last about a 1/3 as long as it should. There is nothing good i can say about this kegerator. Also when it first arrived the fridge door fell off, and the vinyl part on top of the kegerator hung down so low that it would prevent the door from closing, I had to stick pieces of cardboard under it so that the door could shut! This is just a kegerator with inferior parts. Waste of my money, I am now going to have to pay to replace the tower, faucet, lines, regulator, and buy an external temperature control that will override the kegerators thermostat so that the unit can get cold enough. I couldn't regret this purchase more.

GE SmartWater Inline Filter System (GXRLQ)

This is really nothing more than a taste filter it does a pretty good job of making los Angeles water taste good I use this to run to the water and ice maker in my fridge.

However, doing an actual water test, it does not remove a lot of the dissolved solids and minerals.

The overall system is fairly well made it is easy to change filters and you do not have to turn of the water to do so as the filter head features an auto shut off when the filter is removed.

However, the attachment to the wall is a single screw, and the connectors for the water lines are not as robust as i might like (friction fit essentially but then it IS all plastic and not brass.) this is probably better to use with plastic water line, as the flexibility of the plastic line should reduce stress at the fitting. I of course am using copper line, and thus my concern over the robustness of the fittings.

This is a great option for a fridge that does not have a built in filter. The filter is easy to install and easy to change. Water tastes good. I bought extra long tubing and ran it up to the cabinet above the fridge through a small hole made with a drill. Now it is totally concealed and accessible with a step stool.

Buy GE SmartWater Inline Filter System (GXRLQ) Now

This part is exact replacement as advertised and arrived in new, shrink wrapped condition. Even after shipping it still saves me money over buying it at local hardware store.

Read Best Reviews of GE SmartWater Inline Filter System (GXRLQ) Here

Simply put...it works. I had that "Water Hose" taste on Ice due to my lines are all plastic. It went away immediately after installation. I only took one star away because the installation instructions lack detail on where the filter is to be placed. But it was easy if you have plastic line from the refrigerator valve to the ice-maker. Enjoy.

Want GE SmartWater Inline Filter System (GXRLQ) Discount?

The water tastes great and according to the fact sheets filters out some particles and spores. However, there is a design flaw with this model, after a couple of filter replacements, the nubs at the top of the filter do not reach high enough to trigger the release in the manifold to release enough water and it dribbles out.

This problem happened to me too, but can be fixed with a garden hose plastic washer inserted at the top of the filter. Use a thin washer or a used washer for best results. See the discussion at "FixYa" site, search for "GXRLQR"

Save 9% Off