Whirlpool 4396510P Quarter-Turn Cyst-Reducing Side-by-Side Refrigerator Water Filter, 2-Pack

I have used this filter and find this to be a very good filter for this cartridge type.

These little filters cannot remove everything from your refrigerator water system, you'll need a high quality reverse osmosis system for that.

Recently I found a website* that lists the actual impurities that this 4396510 filter removes, I quote:

* 99.35% of Lead at pH 6.5

* 99.31% of Lead at pH 8.5

* 96.70% of Mercury at pH 6.5

* 91.20% of Mercury at pH 8.5

* 99.93% of Asbestos

* 96.30% of Benzene

* 99.70% of P-Dichlorobenzene

* 99.99% of Cysts

* 85.60% of Atrazine

* 92.96% of Toxaphene

* 93.06% of 2,4-D

* 97.60% of Chlorine

* 99.30% of Turbidity

* 99.90% of Particulates (Class I)

As with all built-in refrigerator water filters, the 4396510 does not remove Fluoride.

The 4396510 cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53.

The other model cartridge (4396508) does not filter quite as much as the '10' model.

*Because HTML is not allowed in these reviews I can't show the web address....

It hard to tell about water filter either it is working or not. I feel better to have it. I found this is one the reasonably priced store.

4396510 is newer model of 4396508 and "p" means "pack".

Buy Whirlpool 4396510P Quarter-Turn Cyst-Reducing Side-by-Side Refrigerator Water Filter, 2-Pack Now

We have a Sears Kenmore refrigerator model number 106.53582300 (made by Whirlpool) that we purchased from Sears. It has the round water filter in the base of the refrigerator that should be replaced every year. Sears sends post cards wanting to sell us a filter for $40 plus shipping. After some research we came across this one for less and it works superbly.

Highly recommended to save money over the Sears option.

Read Best Reviews of Whirlpool 4396510P Quarter-Turn Cyst-Reducing Side-by-Side Refrigerator Water Filter, 2-Pack Here

I have a Kenmore side-by-side refrigerator and have used sveral brands of replacement water filters.

I have used Kenmore 46-9010

I have used WaterSentinel WSW-1

I have used Whirlpool 4396508

(the filter being rated is the newer version of the older filter above)

The Whirlpool #4396510 is the newer version and does not need to have a gallon of water run through it after installing it (even though I did flush a liter or two through it to get the air out of the system and to ensure no leaks).

What I like about this filter is the following:

1) NSF certified/tested to tests #42 and #53 (not all filters are tested at all or do not test to #53).

2) This filter claims to removes cysts (whatever they are), but again not all filters claim to remove whatever this is... so it must be a capability that this filter or the tests above meet and allow for (again, other brands do not state, so they must not)??

What I like, is that this filter is a name brand filter for $25.00/ea, tested and certfied, ships free as it meets the minimum shipping amount due to being a 2-pack (so I have year's worth of filters since I replace every 6 months as required)... and compared to the lower price of the cheaper filters available, I do not mind paying an extra $7.00/ea for the benefits mentioned above.... for me it is worth it!!!

As mentioned above, I have purchased and used various replacement filters that all seemed to work, but for the money, this filter has all the right specifications, certifications and that it is the new/updated part number to the Whirlpool filter #4396508 which does not require a gallon of water to be run through it flush out any loose carbon particles.

Buy and enjoy.

Want Whirlpool 4396510P Quarter-Turn Cyst-Reducing Side-by-Side Refrigerator Water Filter, 2-Pack Discount?

This is the second batch of these refrigerator water filters I have ordered from Amazon. Any place else you buy them will charge a lot more.

However, I learned something from another review on Amazon that I'd like to pass on: My refrigerator has an indicator light system that supposedly tells when the filter should be replaced. But the indicator lights indicate only the time since they were reset, not the amount of water that has passed through the filter.

Supposedly the filter is good for 400 gallons of water. The refrigerator assumes that by the time six months have passed you will have run 400 gallons of water through the filter. Hence, six months after resetting the indicator light system, it will again show that the filter needs replacing, no matter how much (or how little) water has actually gone through the filter.

Since I use the water dispenser on the refrigerator infrequently, and since I don't use that much ice, that means I have probably been replacing the filter before it really needed to be replaced, based solely on the fact that six months had gone by since I last replaced the filter and reset the indicator lights.

Starting with this batch of filters, I will not replace a filter until the water tastes like the filter isn't doing anything. Your mileage may vary.

Save 23% Off

2 Pack - 3M CUNO CS-52 FILTER CARTRIDGE for BOSCH, NEFF, SIEMENS FRIDGES/FREEZERS - FREE WORLDWIDE

• Genuine and original 3M-CS-52 Cuno filter
• Suitable for BOSCH, NEFF and SIEMENS Fridges/Freezers
• Will fit other brands but check your appliance details before ordering
• FREE WORLDWIDE SHIPPING to all US States, Canada, Asia, Australia etc..........
• Buy from a trusted Main 3M Cuno distributor (not an online hobby business)

Received filters as advertised, and they arrived within 2 weeks despite coming from another country. Great deal on the filters.

Also, these are the correct filters for the Bosch refrigerator despite the fact that the label says for commercial use only. The original filter that came from the factory said the same thing. This is the one Bosch intended to be used.

Buy 2 Pack - 3M CUNO CS-52 FILTER CARTRIDGE for BOSCH, NEFF, SIEMENS FRIDGES/FREEZERS - FREE WORLDWIDE Now

Works as well as the bosch brand and is cheaper. Gives me great tasting water from my fridge. Not problem installing.

Read Best Reviews of 2 Pack - 3M CUNO CS-52 FILTER CARTRIDGE for BOSCH, NEFF, SIEMENS FRIDGES/FREEZERS - FREE WORLDWIDE Here

After buying a new refrigerator with water dispenser so I need these filters and by Siemens will cost them about $ 85 / each in Scandinavia where I live.

I am very pleased with the deal, easy to order, pay and fast delivery.

Want 2 Pack - 3M CUNO CS-52 FILTER CARTRIDGE for BOSCH, NEFF, SIEMENS FRIDGES/FREEZERS - FREE WORLDWIDE Discount?

As I assume the majority of buyers would in fact be wanting this filter for a residential appication (their home refrigerator) as I was, I find this add missleading and think it should be clearly specified that this is only for commercial use with food service equipment and NOT drinking water. It's going to be too much trouble to ship these back to the UK from USA so in the garbage they go.

Kenmore Refrigerator Icemaker Ice Maker & Water Valve 4318047

• Enjoy the full function of your refrigerators by fixing your built in machine
• Designed to replace the icemaker fill valve in Whirlpool and KitchenAid refrigerators
• Used for single valves Whirlpool models
• Compression fitting screw on at both ends
• Easy to install

The picture by "Buy-it-now-store" shows water valve Part#: 4318047 (which is exactly what I uninstalled from my Whirlpool fridge; see my pictures above or search for the video on youtube "Refrigerator Water Valve Repair Refrigerator Repair Help") but they sent me the Whirlpool 2315576 Valve-Inlet for Refrigerator.

Before getting upset I decided first to give it a try and... it worked. So, I didn't complain to the seller; their price was much lower ($18.21) than the Whirlpool's. It turned out to be a win-win situation for everybody.

Apparently Whirplool replaced some time in 2003 the old 4318047 with newer 2315576 because along with the installation instructions for the 4318047 (5/98) there was an insert from the company for the "Quick-Connect Single Water Valve" (6/03) explaining what to do in case I received either valve. I also got a small bag of add ons for the old valve. So, the two valves are interchangable and compatible with many refregirator models.

Still, in order to get a better idea on how to work with the new valve, I found and watched the video on youtube, which made the installation process a breeze [search for "Refrigerator Repair Replacing the Water Inlet Valve (Whirlpool Part# 4389177)"]. Enjoy the new valve :).

Buy Kenmore Refrigerator Icemaker Ice Maker & Water Valve 4318047 Now

This looks to be a good quality replacement part, however the description makes it sound like it will work if you have ice and water in the door "ice maker and water valve" it only has one valve so it did not work for what I needed. It was cheap though so I was only out $10.00. The company I got it from said I could get a refund but it would cost $10.00 in shipping to return it, so I just kept it and put it in my parts bin in my garage, maybe my neighbor will need one someday.

Read Best Reviews of Kenmore Refrigerator Icemaker Ice Maker & Water Valve 4318047 Here

This water valve is exactly as the picture shows. It is a direct replacement for single valve Whirlpool or Kenmore refrigerators, and is identical to the one that I replaced on a Whirlpool refrigerator. If your refrigerator has a water dispenser, then you should get the double water valve (two of these valves combined into a common frame).

Want Kenmore Refrigerator Icemaker Ice Maker & Water Valve 4318047 Discount?

I bought this product a long time ago and am just now posting. It was NOT hard to install and works great. By purchasing this product on line and then installing it myself, I saved at least $100

I ordered this part not being sure it was what I actually needed to get my ice maker working again. I thought very strongly that my problem was with the old valve but was not 100% positive. After searching at my local big box hardware stores only to find that they only have these items available through their phone in parts department and at what I thought was a higher price than I wanted to pay, I searched Amazon and found this part. The part I was considering from the big box hardware phone in parts departments were priced at 3+ times as much as this valve here. The price they wanted was more than buying a whole new icemaker with all the parts included. I ordered this part, had it express shipped, received it two days later, installed it and had ice that evening! Installation was easy...I just looked at how to take the old one out and put this one right back in the exact same way. I have been using this part for over a month now and have had no problems at all and plenty of ice!! I highly recommend this part!!

Whirlpool W10315283RP Maxima Door Reversal Kit

We have a stacked Maytag Maxima 6000 series washer and dryer. The doors open opposite directions (the washer is hinged on the left and the dryer on the right). When the two are side by side, that is a smart way to open the doors washer on the left, dryer on the right, open both doors and clothes can be passed from washer to dryer easily.

Ah, but when they are stacked, that arrangement is a pain. Well, unlike refrigerators, Maytag made this hinge a little complicated to switch. This "kit" is required.

This "kit" is a single piece of plastic trim that fits inside the door, between the outer and inner trim piece. Yes, it's an expensive piece of plastic and seems all wrong to have to buy that, but that's the design.

The trim piece comes with step by step instructions in English and French. Two tools are required, a #2 Philips head screw driver and a T25 Torx screw driver. While waiting for this part to ship, it's a good idea to get the T25 Torx screw driver they are easy to find now. Any length will work fine they recommend an 8 inch version, but any size will do. I used a small rechargeable driver with a Torx bit and a cordless drill with the Philips bit for disassembly.

There are only a few minor tricks to the switch. It took me about 15 minutes to do the job, start to finish. The first scary part was removing the 4 Torx screws that hold the door hinge there is a hooked tab that holds up the door once the screws are removed (no need to have an assistant hold the door). After that it's really straight forward removing the Philips head screws. Pay attention to removing only Philips head screws (the instructions said 17, I only had 14 on my door). There are some smaller Torx screws that are not removed. To remove the inner door trim, there is a sort of tab arrangement at the top and bottom, a little persuasion with my hand released one of the tabs, then the panel separated easily. All the rest is really simple. The trim piece from this "kit" replaces the trim piece already installed on the door.

Now my wife is super happy, both doors swing the same direction and it is much easier to transfer laundry from the washer to the dryer.

This kit solved my problem which was that I wanted my washer and dryer's set up the way my hook ups were, dryer on the left, washer on the right. Now my doors open outward which means you can open both and just transfer from one to the other without using a basket and closing a door.

Buy Whirlpool W10315283RP Maxima Door Reversal Kit Now

I consider myself good at following written directions, but halfway through the process of installing this I felt lost. A few minutes later, it all worked out. I don't know why they couldn't have designed the part to flip over or, if that was too difficult, why they didn't just include the 50 cents of plastic with the $1000 appliance.

Read Best Reviews of Whirlpool W10315283RP Maxima Door Reversal Kit Here

This piece worked very well and was not too difficult to install. It took a little time but was fairly simple. It is a lot to pay for a piece of plastic, but is required to reverse the door on this dryer. Reversing it was such a great thing as my washer and dryer are stacked. I no longer bump my head or shoulders while doing the laundry. Worth getting.

Want Whirlpool W10315283RP Maxima Door Reversal Kit Discount?

Frigidaire FRIGIDAIRE REFRIGERATOR DOOR SHELF END CAP - 215267701

• THIS 215267701 FRIGIDAIRE DOOR SHELF END CAP FITS MANY FRIGIDAIRE, GIBSON, KENMORE, TAPPAN AND

• ELECTROLUX REFRIGERATORS.

  COMMON REFRIGERATOR DOOR BAR END CAP. SNAP IN TYPE FIT LEFT &

• RIGHT. THIS SNAPNTYPE END CAP SHELF RETAINER BRACKET CAN BE USED FOR RIGHT OR LEFT SIDE OF THE
• Works with the following models: Frigidaire 30-2552-00-01, Frigidaire 30-2552-23-01
• Frigidaire 30-3152-00-02, Frigidaire 30-3226-00-03, Frigidaire 30-3236-23-04

I'm renting an apartment and the last tenants broke this part in the fridge and this wa perfect to fix it!

Buy Frigidaire FRIGIDAIRE REFRIGERATOR DOOR SHELF END CAP - 215267701 Now

I had this fit on the refrigerator door shelf end cap. It snapped into place and have had no issues. I'm happy with my purchase

Frigidaire 240363701 Door Bin for Refrigerator

This is exactly as described. Fits our Frigidaire Refrigerator perfectly. Looks to be a direct factory replacement item. I would purchase this item again.

Save 23% Off

Frigidaire FFEF3048LS, 30 Inch Electric Range, Stainless Steel

• Ready Select Controls
• Two Rear 6 Inch1,250 WattsElements
• One Touch Self Clean
• Extra-Large Element &Window
• Right Front 12 Inch 2700 Watts, Left Front 6 to9 Inch 1.200/2.500 Watts

The width is listed as 47 inches that is the actually the height! It was written incorrectly and almost caused me to cancel my order. Luckily I caught the error in time, otherwise I would have still be shopping for a new oven.

Save 10% Off

Samsung RF4287HARS 28 Cu. Ft. Stainless Steel French Door Refrigerator - Energy Star

• Samsung
• Samsung RF4287HARS 28 cu ft French Door Refrigerator with 5 Spill Proof Glass Shelves Twin Cooling Plus System Surround Air Flow FlexZone Drawer Counter Height Design and External IceWater DispenserStainless SteelRF4287HABP160 RF4287HAWP
• RF4287HARS
• Samsung - RF4287HARS

Have had this fridge for over a year, love the size . . . but milk always going sour before the expiry date, cheese molding, leftovers didn't last. Rationalized all these things. 'must be leaving the milk out too long', 'must have dirty kids hands touching the cheese' etc. Because the digital temperature reading said it was 34 deg in the fridge, and it must be accurate, right? WRONG! Verification by 3 separate mercury &digital thermometers show that the fridge compartment temp runs 40-50 deg, and that's in winter (wonder how warm it had been running last summer!) This is everywhere in the fridge compartment, top shelf, bottom shelf, door, right next to the ice maker, etc. Cannot find anyplace in the fridge that runs less than 40 degrees. In hindsight, no wonder food was spoiling! The fridge programming will not allow the temperature to be set any lower than 34F. Service technician has replaced the main control board and the digital touch screen assembly. Have not resolved the problem. Phoned Samsung customer support and was only told that since the factory warranty is expired they can and will do nothing. The review from J LeRoy is enlightening. Will update if ever fixed. Freezer & flex-drawer hold reasonable to programmed temperature (2-6 degrees above programmed temp).

Buy Samsung RF4287HARS 28 Cu. Ft. Stainless Steel French Door Refrigerator - Energy Star Now

Initially we were thrilled with this fridge (black version). After about 3 days, my wife noticed the wine (kept in door) wasn't as cold as in our last fridge which was also a french door. I tried turning down from 37° (what our old fridge was set at) clear to lowest of 34°. But still couldn't get door temp satisfactory. I finally contacted Samsung after a little web searching thinking the temp sensor is probably faulty. Incredulously I was told as long as temp fits in their 34° 46° degree range then there is no problem? I said no, my understanding is that means refrigerator can be set between 34° and 46° and I can assure you there's a problem. No, I was told and if food is cold I should be happy. I stated milk needs to be at a max 40° and this is what the gallon door storage is alluding to in their advertising, and I measured temp in door as high as 42° using 2-3 different well known brand thermometers. Without being able to trust the temp in door storage there is not nearly enough room in this model. Then I asked for a supervisor thinking she was probably new. I was told the same thing and that my thermometers were most likely off (not considering the whole issue started w/lukewarm wine). Customer service supervisor explained to me that if I wasn't using a Samsung thermometer, I couldn't be sure of accurate results. I asked where I could get a Samsung thermometer? She said Samsung doesn't make thermometers. WHAT! WOW! Well, that was enough of Samsung's customer service for me, I'm hoping to get a long life out of my new fridge and if this is what I have to look forward to, then no thank you. Back to the store this one went, exchanged for a good old made in U.S.A. GE 3 door which we love. Had a question for them and contacted cust service. I was pretty sure it was nothing but they right off offered to send out a tech to check it out. I declined as I thought it wasn't necessary, just something I needed to figure out, but what a different cust service experience.

Read Best Reviews of Samsung RF4287HARS 28 Cu. Ft. Stainless Steel French Door Refrigerator - Energy Star Here

This refrigerator has it all: plenty of storage, excellent lighting, quick chilling, and nice design. Yes, the ice clunks loudly when "ejected" to the dispenser, but not a big deal for us as we don't use much ice and only turn on the maker when we need more ice. We have not had ice come flying out or the water spray. The fridge runs quietly and I don't find it difficult to clean the exterior. There are only 2 adults in the household and we tend not to leave many fingerprints on the doors.

Overall: I recommend this refrigerator.

Want Samsung RF4287HARS 28 Cu. Ft. Stainless Steel French Door Refrigerator - Energy Star Discount?

I Love my Samsung RF4287HARS. It is very nice looking, cleans easily, has plenty of space, and his holding up very well in our home.

I was afraid the freezer drawers wouldn't be adequate, as I had a side by side before. Quite the contrary. Holds just as much, if not more.

The refrigerator space is more than superior.

Whirlpool WHIRLPOOL 2187172K REFRIGERATOR SHELF BIN

• THIS WHIRLPOOL 2187172K REFRIGERATOR SHELF BIN IS DESIGNED TO HELP YOU ORGANIZE AND KEEP TRACK OF
• THE FOOD IN YOUR REFRIGERATOR. MANY BINS HAVE SEPARATE TEMPERATURE CONTROLS AND CAN EITHER BE
• OPAQUE OR CLEAR. SOME ARE DESIGNATED FOR SPECIFIC STORAGE ITEMS, SUCH AS MEAT OR VEGETABLES.
• Works with the following models: Whirlpool 5ED2FHKXRL05, Whirlpool 6ED2FHKXRL00
• Whirlpool 6ED2FHKXRL06, Whirlpool 6ES2FHKXRQ00, Whirlpool 8ED2GTKXRQ00, Whirlpool 8ED2GTKXRT00

This fit my Sears model perfect. It is just as good as original one that came with it. I would recommend item.

Buy Whirlpool WHIRLPOOL 2187172K REFRIGERATOR SHELF BIN Now

Awesome fit.... Was kinda upset it broke and didnt know I could replace it.... I looked up amazon and to my amazement it was there..... So much cheaper then going through Whirlpool....

Read Best Reviews of Whirlpool WHIRLPOOL 2187172K REFRIGERATOR SHELF BIN Here

I had "empty" space in the door of my side-by-side Kenmore Refrigerator Model 106.5894*800 or 106.5895*800 for a long time. I needed another self for condiments and decided to search for the shelf at Amazon. I'm happy to say that this shelf fits my Kenmore perfectly. It's the exact size and color of the other shelves.

Want Whirlpool WHIRLPOOL 2187172K REFRIGERATOR SHELF BIN Discount?

I have purchased many of these bins to replace the ones that have broken. They would last longer if I could keep my teenagers from over-loading them or grabbing the bins when closing the fridge door. I've had my refrigerator many years and have had to replace 4 of the shelf bins, but they are worth it.

Save 11% Off

These shelf bins are exactly the same as the originals that came with the refrigerator. They fit perfectly and are strong.