Whirlpool Part Number W10335219: BIN-CNTLVR

This product was exactly what I was looking for, the largest door bin appropriate for my refrigerator. The traditional parts scheme found online would not indicate if the part number was for the smallest or the largest door bin.

Bought a new whirlpool fridge but wife thought door could use one more shelf. Good price, fits exactly, holds the stuff she wanted it to. Fast shipping-would purchase from this vendor again.

Buy Whirlpool Part Number W10335219: BIN-CNTLVR Now

This is the same door bin that my Whirlpool side-by-side refrigerator/freezer has and for less than online parts stores. I ordered this with a glass freezer shelf and was glad to see the items combined for one $5 shipping charge instead of two charges for $10. The refrigerator/freezer had room for these and we needed this extra storage space that Whirlpool conveniently left out. Very happy with purchase.

Read Best Reviews of Whirlpool Part Number W10335219: BIN-CNTLVR Here

Maytag Refrigerator Icemaker Ice Maker & Water Valve 61005273

• Maytag

Product arrived on time, easy to install, ( alright, not if you're a girl!) and works perfectly. Note of caution, if you install a new ice maker also, make sure the water level is not set too high when you first install it. I have higher than average water pressure, and the water valve works on time, not pressure!

Buy Maytag Refrigerator Icemaker Ice Maker & Water Valve 61005273 Now

Great replacement for the original that was wearing out. Easy to install and I have had no problems with it.

Read Best Reviews of Maytag Refrigerator Icemaker Ice Maker & Water Valve 61005273 Here

My old valve had 2 male ports. This replacement--and is noted as such by mfgr--has a male and a female. HOWEVER, this female connection is a compression connection, which required no additional parts. You simply push the flexible water line into the valve opening, then pull back out some to 'snug up' the connection. EASY fit, no leaks!!

Want Maytag Refrigerator Icemaker Ice Maker & Water Valve 61005273 Discount?

Looked a bit different from the one I pulled out. When I installed it, it worked flawlessly. Does what it is supposed to!

Icemaker was genning,but not filling. I replaced both items, but I am quite shure this was the only problem. Exact match to my old part.

Frigidaire FRIGIDAIRE 134398300 START SWITCH

Everything was in working order and our drier is running now. I would buy from this company again. It took a bit of time for the order to arrive, but we were happy when it came.

Save 7% Off

LG LFX31935ST

I've owned the LG LFX31935 for a little more than six months, and overall it has been great. It has a cavernous interior with very flexible storage options. It does a great job of keeping food cold/frozen, and it's very quiet. The material and workmanship is top notch, and it looks great. There are two things worth commenting on in more detail: the wine chiller and the ice maker.

WINE CHILLER

This unique feature is a big plus, and honestly a big selling point for my wife and I. We don't have a wine fridge, and it's nice to be able to chill a bottle of red before drinking it. This "blast chiller", as it's called, works well it chills a bottle of wine from room temperature to ~62F in 8 minutes. You just pop open the blast chiller door, slide the bottle in cork first and rest it in cradle, close the chiller and the fridge and then press the button on the front panel. Most of the time, the thing just starts to work the cradle gently swirls the bottle while the cold air is circulated through the chiller's chamber (it's a bit noisy while running, somewhere between a dishwasher and a stand mixer). Sometimes, however, the chiller refuses to start and affirms its obstinance with a red light next to the start button. According to the manual, this can happen when the fridge is not down to temp, which kind of makes sense. But the behavior seems more random than that it has done this a half dozen times at least, sometimes when I'm pretty sure nobody has been in the fridge for hours. In fact, it seems to happen whenever have guests over and are trying to show off our #$%*&@ wine chiller! Otherwise, though it's a very slick feature and one we use all the time (though it would NOT be a good idea to use on a bottle that should otherwise be decanted due to sediment).

ICE MAKER

The ice maker on this unit is completely contained in the left-hand door. This leaves the main compartment wide open and unobstructed by the ice maker, which is great. The ice maker itself if rather small, as is the bin it's capacity is probably less than half that of my old side-by-side Kenmore 25 cu ft with the ice maker in the freezer. But the real problem is the dispenser. When you push a glass against the dispenser plate, an electric motor lowers a trap door in the dispenser chute and then the dispenser mechanism starts pushing ice down the chute. It works great until one of two inevitable things happen: ice cubes jam up in the chute (the jam can be freed by poking a finger up the ice chute effective, but somehow feels wrong), or ice delivery stops because the ice in the bin is frozen together (which requires opening the left door of the fridge, opening the ice maker door, and breaking up the frozen ice mass in the bin or discarding it altogether). This is not an occasional problem, it happens almost always the first time it is used in the day.

I've had the factory-authorized service company out several times. The last time, they replaced the entire ice maker assembly (and the control panel as well, for some reason). No joy. This problem is not going away until some aspect of the current system is redesigned: either the ice chute is not wide enough, the chute door doesn't open far enough, the ice cubes are the wrong shape, the ice doesn't stay cold enough, or maybe even a combination of several things.

In all, I'd say the positives significantly outweigh the negatives, but on a fridge that costs three times what my previous one did, I guess I expected more. I'm still hoping that LG will take an interest in the ice maker problem and provide a field upgrade, but I'm not holding my breath.

Samsung Compatible Refrigerator Water Filter for DA29-00020A, DA29-00020B, 04609101000, 09101, 46-9

The problem was the filter itself. The gasket around the top of the filter was too big. It didn't fit and caused a major leak out of the fridge, and even made it down to the lower level making a very big mess. I replaced the gasket with the one around the old filter and its working ok now, although the water doesn't really taste very good, but maybe that will go away.

great price, about half the cost of replacement in local store, just what I needed as replacement for my samsung frig, will puchase again

Buy Samsung Compatible Refrigerator Water Filter for DA29-00020A, DA29-00020B, 04609101000, 09101, 46-9 Now

Water didn't taste right after replacing with my original filters. I have never had trouble with the compatible filters before.

Read Best Reviews of Samsung Compatible Refrigerator Water Filter for DA29-00020A, DA29-00020B, 04609101000, 09101, 46-9 Here

So far it works great and I saved a few bucks in the process. The filter fits perfectly in my Samsung fridge and it was shipped to me in a timely manner.

Want Samsung Compatible Refrigerator Water Filter for DA29-00020A, DA29-00020B, 04609101000, 09101, 46-9 Discount?

The water filter we received is perfect ! Compared to the expensive ones we use to buy it does a perfect job. We can now buy 2 for the price of 1....Will definetly purchase again.

Whirlpool 4387913 Overload for Refrigerator

It came within 4 days took it out of the package and it fit perfectly. Came with the overload and the relay which most places didn't give you both. Unbelievable price. Other places wanted 40$ or more just for the overload. buy it you won't be dissapointed.

I looked up the part on various sites, using the part # on the parts lists. When it arrived, It had both the overload, and the start relay. The refrig I have seems to be a little different. The Spade Connector that ataches to the power cable was only about 1/8" wide, and the one that came with the kit was about 1/4" wide. I was able to file it down, and it seems to work as I am writing this. I ordered a capacitator also, but I saw no way to use the cap if I used the start relay. I looked back, and all websites seem to look like the wider spade. So far, I am happy with the quality.

Buy Whirlpool 4387913 Overload for Refrigerator Now

When our 18-year-old Whirlpool quit, thanks in part to lack of condenser cleaning on my part, We were afraid the compressor was gone. I drove an hour for a non-OEM starter relay that didn't work, just to save time or so I thought. Then I ordered the right parts through Amazon and had the fridge back up and running in about fifteen minutes, once I actually got around to putting the parts in. Be warned, there are no directions that come with the parts, but I had already researched that, and it could hardly have been easier. Take the (brown) relay off your fridge, and if it rattles, it's toast! Buy these replacement parts, take off the back panel, snap in the new parts, clean the condenser coils, and bingo!

Read Best Reviews of Whirlpool 4387913 Overload for Refrigerator Here

Frigidaire FFHT1817LB 18.2 Cu. Ft. Black Top Freezer Refrigerator - Energy Star

Complete garbage, as are most Frigidaire appliances these days. Compressor died two years after purchase. I will not ever buy any more Frigidaire appliances. I had one dishwasher by them replaced three times under warranty and after it died the 4th time, I bought another brand. It is 8 years old and runs like a champ.

The compressor failed after just 18 months. Apparently, these items used to have 10-year warranties with this Fridgidaire but now it's only a year. Now I need a new 'fridge.

Buy Frigidaire FFHT1817LB 18.2 Cu. Ft. Black Top Freezer Refrigerator - Energy Star Now

It works as a fridge, but has some design choices that really irritate. The small drawer doesn't come out very far, and there's no way to remove it for cleaning. I live in a slightly off kilter Victorian, and I've always used after-market rollers adjustable for height. But for some reason, Frigidaire decided to use a smaller threading for the leveling feet than every other appliance on the market. So I'm stuck with a choice between an immovable but level fridge or one I can move for cleaning on the built in rollers, but with the door swinging open wildly because it's so far off level.

Read Best Reviews of Frigidaire FFHT1817LB 18.2 Cu. Ft. Black Top Freezer Refrigerator - Energy Star Here

Whirlpool WHIRLPOOL 2202807W REFRIGERATOR DOOR HANDLE

• THIS WHIRLPOOL 2202807W REFRIGERATOR DOOR HANDLE FITS MANY WHIRLPOOL, MAYTAG, KENMORE, ESTATE AND
• ROPER REFRIGERATORS.
• DETAILS: WHITE DOOR HANDLE
• DIMENSIONS: 20-1/4" L X 1-1/8" W
• Works with the following models: Whirlpool 1456^2A, Whirlpool 1456W2A, Whirlpool 2VET20NKJN01
• Whirlpool 2VET20NKJW00, Whirlpool 2VET20NKJW01, Whirlpool 2VET22NKJW00, Whirlpool 2VET22NKJW01

I've searched the internet for hours and found out the handle is expensive (Near $150 on several sites). The handle is made to fit several different types of fridges (I personally own a roper brand made in 1994). This handle can replace missing or broken handles that are 21 inches. It does require a set of screws, which could be purchased at home depot, or on amazon (If you want to get cheap take a screw from the top and bottom of the freezer handle if you're able to and use those for the door). The handle is sturdy and wont move once screwed onto the door. It's white so if you want to paint it that shouldn't be a problem. I'd recommend this to anyone looking for a replacement for a Kenmore, whirlpool, maytag or roper handle.

Frigidaire WF1CB Refrigerator Replacement Filter by Water Sentinel

• Made in USA

Definitely not great. But, for the price I got it, I ain't complaining. They didn't provide me tracking information which was disappointing, however the product came on time. I installed it in minutes and had no issues with installation. After the first two usage, I did notice the white chlorine for the next few times. Finally it blended well. The taste is more or so the same. I am happy I was able to replace my filter. I might stick with this for my next few purchases until I find something better.

Buy Frigidaire WF1CB Refrigerator Replacement Filter by Water Sentinel Now

it did took a little longer time than normal to work fine, also I do notice not all that. could use some improvement

Read Best Reviews of Frigidaire WF1CB Refrigerator Replacement Filter by Water Sentinel Here

The price was great and exactly what I needed. The website was easy to use and find what I needed. I didn't have the product number, so thank you for the info you gave about the refrigerator so I could match it up. I will definitely use this website again next time I need to order this product. Thanks for you quick delivery, as well!

Want Frigidaire WF1CB Refrigerator Replacement Filter by Water Sentinel Discount?

This fit into my fridge with no leaks and am still using it. Will buy here again when the 6-12 months passes.

The taste of the water is awful at times. I made a whole pitcher of lemonade and had to throw it away. It seems the filter does not work properly. Thought I was getting a good deal. I guess next time I will have to buy the filter directly from Frigidaire, even if it cost more.

Vinotemp VINO-300WC Economy Model Wine Cabinet Refrigerator, Dark

I decided to go with the Vinotemp 300 wc after lots of research. In order to make the right choice, you should be able to determine the following:

1. How many bottles are you planning to store (usually multiply what you currently have X 2 since having a wine cabinet will surely increase your wine buying habits)

2. Where will you put the cabinet? If you have a basement, that will be the ideal place, hence the unit does not need to be too flashy. You could also put it in your garage, if you have the room. Regardless, and unless you store it inside the house you must choose at least a 2,500 BTU unit... If you're thinking about having it inside the house, a 1,500 BTU should be enough (that's the standard)

3. Noise you should consider how noise is the unit, especially if you want to have it inside the house.

4. Shipping it is always really expensive. However, there are tons of promotions for free shipping

5. Door if you want it inside the house you can chose a glass door. Anywhere else, a solid door works best.

6. Temperature zones you don't really need more than 1 zone. You can usually keep the white wine on the bottom of the cabinet, where the temperature is a bit lower.

7. Shipping times Most of these cabinets will take anywhere from 3-8 weeks to be delivered after you place the order. Check to ensure the unit is in inventory and ask about shipping options/timeframes.

for a great resource please click here:

Now, unfortunately, I did not take into account the lack of humidity controls on the Vinotemp unit. This is an issue for me, given that humidity in the cabinet is around 54%. I had to purchase an additional humidifier (additional $ 200) and have it running inside the cabinet in order to achieve 70-80 % humidity. This is something that the Vinotemp sales rep did not care to mention when I spoke to her. She said that the unit "promoted the right conditions for wine aging" which is clearly not the case.

I purchased the unit from Sam's club. Horrible experience. I waited 8 weeks to get delivery. Sam's club still advertise the unit as being "in stock"..."Cheap Sales Tactic" IMHO. All Vinotemp units are made to order. No one keeps stock. If they tell you the unit is in stock they are probably flat out lying or do not know how Vinotemp works.

Back to the unit itself, the outside finish is "not as nice" as it seems online. Luckily for me, the unit was intended to go in the garage. The inside rack (2 bottles go in each cubby hole) is just great, just like a real cellar. The overall feeling is sturdy. That's a big plus over other great units, such as Eurocave , which have trays (not a fan of trays). However, based on my experience, it seems that the Eurocave is a very strong contender, if not better but also more expensive than Vinotemp.

About Vinotemp, the company. Their customer service is HORRIBLE. I registered my unit online as soon as I received it. They don't have any records of the registration. They still cannot find me on their support computer (after 6 calls and 1 product registration, only 2 months after my purchase), and their customer service folks will never call you back. It puzzles me how bad their support is for products that are over $2,000...One should expect much more.

I hope this review is helpful. Feel free to drop me a line at jbastante@gmail.com.

Save 13% Off