Showing posts with label top freezer refrigerator. Show all posts
Showing posts with label top freezer refrigerator. Show all posts

Friday, August 29, 2014

Brita Refrigerator Replacement Filters for GE

Brita Refrigerator Replacement Filters for GEI decided to replace the original filter on my GE refrigerator after about 10 months when the "change filter" light came on. I went to the local hardware store and found a replacement for $49 plus tax. It seemed expensive, so I decided to check Amazon instead and found these along with the OEM GE filters.

I was reluctant to try a filter other than the GE just to save a few bucks, but if they are identical, why waste money? Besides, Brita is probably better known than GE for filters. Anyway, the filter looks, fits and works just like the original. I have noticed no difference in water flow or noise. The water tastes clean and looks clear.

One note as per the instructions you should pre-fill the filter at the tap before installation and then run about 10 glasses of water through the new filter before use to stabilize the flow.

As for the vendor Fridge Filters, I found that you cannot track their packages online as you can with most things purchased from Amazon, but the filter arrived in Florida 4 days after my order was placed. I gave the product and the vendor 5 stars, not that I get particularly excited about a water filter, but there were no negatives to take a star away.

You wouldn't think installing a water filter in a refrigerator is rocket science but apparently some people have had trouble with these filters. We use them and haven't had any trouble. If you follow the instructions you won't have any either. They're pretty straightforward:

Fill the new filter with water. Tap the sides of the filter and add water if necessary, until the bubbles stop coming up.

After the new filter is installed, run the water dispenser for 3 minutes.

It's that simple. We still get a few minor sputters after running the dispenser but that goes away quickly. The flow doesn't seem any less than through a new GE filter and the water tastes fine.

To remember when to change it write the date on the filter with a permanent marker after the filter's installed (so you can see the date clearly).

Buy Brita Refrigerator Replacement Filters for GE Now

I have replaced my filter twice already and am looking for a third (4th if you count the one the frig came with). First replacement was with the GE filter and second was with this Brita. I never noticed any slow flows or louder than normal sounds. Water doesn't taste any better or worse than with the GE filter. I stumbled accross these reviews looking for another replacement. I think I will go back to a GE model just to try and make another comparison. This review probably isn't that helpful except to say that the thing worked fine for me.

I have had the GE brand filter in for a while now and it is definitely true that the Brita filter flows noticeably slower. Still can't taste any difference in water. In the future I will go with whichever one I find is the cheapest.

Read Best Reviews of Brita Refrigerator Replacement Filters for GE Here

I've used Brita filters many times for other applications, so was excited to find this one to replace the OEM GE filter at a much better price. I'm somewhat disappointed with it however, in that I've only had it a few weeks and can already detect a slight taste in the water. My last GE filter lasted 11 months before I could taste anything. Let me note, however, that this slight taste is not horrible by any means, and I can only tell it's there when I let the water sit for a short time and warm up to room temp. I'm pretty sensitive to water taste, so most people probably would never even notice it.

Several other reviews indicated that the water flow is not the same as the GE MWF. I noticed a slight reduction in flow as well, but it's negligible (unless you're extremely impatient). If you buy this and get NO flow, take it out, and start over reading the instructions first. Fill it with water ALL the way, just like it says. I usually tap mine on the counter a few times to get all the air out of it, and it works fine. If you leave air in it, it's not going to work.

I would have rated it much better if it weren't for the hint of taste that water shouldn't have. Overall, it's a great value. For me personally, I will probably switch back to the GE filter once this one bites the dust, but we'll see.

Want Brita Refrigerator Replacement Filters for GE Discount?

I bought a 3 pack as a replacement for the GE filters, the filter fit just fine and the water flow is just like the GE filter, no problems at all, and saved a few dollars.

Tuesday, July 8, 2014

Medium Sized Dual Voltage Fridge & Freezer in Gray

Medium Sized Dual Voltage Fridge & Freezer in Gray
  • Compact and portable freezing unit
  • Food & Snacks not included
  • Capable of freezing almost anything
  • Ideal for long or short term freezing
  • As a refrigerator it can hold a steady interior temperature

I'm an OTR trucker & this Fridge was tailor made for us guys. I have estimated I have saved many times the cost of this fridge over the 5 years I have owned it. Along with a small microwaveGE JES735WJ .7 Cu. Ft. Capacity Countertop Microwave Oven& a 12V/110 inverterCobra CPI1550 Dual Outlet AC/DC Power InverterI'm not a slave to overpriced truckstops. I can carry along a weeks supply of groceries(Leftovers, TV dinners, Lunch meats & cheeses etc.) along with all the beverages I need. Restocking is a matter of stopping at any large supermarket.Don't let the large size intimidate you as you rareley have to take this out of your vehicle......just take the removable wire basket(included) out, load & put back in the cooler & your good to go. The fridge fully loaded weighs upwards of 100lbs with 50 of that for the groceries. When I get ready to leave I just load the basket, take it to the truck & drop it in.

Unlike the cheap Thermo-electrics the Engels has a compressor & cools or freezes to whatever temp you set it., one or the other but not both, either a fridge or freezer & its not dependant on ambient temp.

A side benefit; unlike built in fridges this one goes with you whether your switching trucks or going on vacation to the lake(works on 110 as well as 12V so you have a spare fridge/freezer at the cabin)If you plan on an extended stay on the lake this will work in you boat as long as you have a 12V plug in.

All in all a great little cooler.Very rugged & very reliable

Pros

1.dependable

2.quiet

3.energy efficient

4.portability

5.built like a tank,steel housing

Cons

1.cost

2.bulky

If this one ever quits I will buy another.

Buy Medium Sized Dual Voltage Fridge & Freezer in Gray Now

This freezer is based on the Sawafuji "swing" compressor. Unlike the fairly similar and far less costly EdgeStar FP430 which uses a Danfoss compressor, the Engel MT45F is specifically designed to be operated in a moving vehicle, and can be run while at an angle of up to 30 degrees. It pulls a maximum of 2.5 paltry amps at 12 volts DC (the Edgestar draws 2.75 amps max, but can get food a little colder). It has a steel exterior, while the similar but less expensive ARB Fridge Freezer, which also uses the swing compressor, has a tough plastic housing, which might be a better choice for boaters.

The Engel is built like a tank, and comes with a 2-year factory warranty. I've had mine running while driving over thousands of miles of rutted dirt and gravel roads, and it works as well as the day it was new.

My biggest beefs with the Engel are: the price, which is close to twice that of the comparable Edgestar and more than the ARB; the storage capacity, which is pretty small; and the primitive controls--no temperature readout, and only a single dial marked 1 5. A more minor gripe is that the compressor hum, while not terribly loud, does seem to carry--you'll know when the Engel is running. Also, it is heavy. Those big steel handles are there for a reason (they also make good tie-down points).

Read Best Reviews of Medium Sized Dual Voltage Fridge & Freezer in Gray Here

I've been an avid camper for more than three decades and got into off-road exploring about 18 months ago with the purchase of a new truck. We often spend two and three nights and days out in the desert of Southern California trekking about. In the summer we have problems maintaining our food at safe chill levels and our drinks at the preferred temperature.

I have an electric cooler which does only a fair to poor job of keeping the internal temperature 20-30 degrees cooler than the 100 degree external temperature. Food will spoil quickly at these temperatures. I've tried three different coolers of increasingly larger sizes stocked with more and more ice. I ended up with two coolers stuff at about 50% ice and 50% food or drink.

With the outside temperature of 68 degrees I read the following temperatures inside the empty Engel 45:

1 = 39 degrees

2 = 25 degrees

3 = 20 degrees

4 = 14 degrees

5 = 1.9 degrees

The basket pulls out so that you can fill it in the kitchen and haul the food out to the waiting freezer. This helps make moving the already freezer easier.

Want Medium Sized Dual Voltage Fridge & Freezer in Gray Discount?

I do a lot of off-road camping (research). I used a Dometic absorption cooled refrigerator for the past few years, which ran on 110 / 12VDC / Propane. The challenge I've had with the Dometic is it couldn't keep temperature in the desert heat. Other problems were the Dometic had to be out of the wind else the flame blew out and absorption systems need to be absolutely level something difficult to achieve when off-road. After a 10 day trip where some of the food spoiled in the Dometic despite my best efforts, I made the decision to look for a more capable refrigerator. After considerable research, I settled on the Engle MT45.

What a difference! The MT45 easily maintains temperature in the desert heat and will quickly chill water bottles and drinks added in something the Dometic couldn't do. It is surprisingly efficient. While the unit is rated at 2.5 amps, that's it's maximum draw at start-up when cooling down. My experience is that it draws on average around 1.1 amps (cycling on and off) when it is up to temperature. My vehicle has an auxiliary battery which is recharged by a 110 W solar panel when on location. With the Engle drawing approximately 30 W maximum, the setup is sufficient to keep the MT45 running indefinitely without the need to start the vehicle to recharge the AUX battery. With a 105 AH AGM battery, I can run the Engle for two days without recharging the battery, figuring a 50% max discharge of the battery and no sun to supply the solar panel. That's pretty good efficiency. The MT45 can operate at an angle of up to 30 deg. No more having to shove shims and rocks under the fridge to get it level like I had to do with the Dometic.

While the MT45 doesn't have a temperature read out I found that a wireless thermometer works just fine and is a small price to pay to be able to see the internal temperature up front in the drivers seat (or trailer). Keeping the MT45 dial at a little above 1.5, the fridge maintains temperature at 38 deg. F. The dial ranges from zero to 5. At 4 or 5 the MT45 can keep items frozen solid.

I really like the basket arrangement. It makes it easy to see and get at items. It also allows me to carry the refrigerator to the Land Rover empty then carry the food and drop it into the Fridge, lessening the weight I need to carry. The old Dometic had to be filled then carried, often very heavy to lift. So while some complain about the weight of the MT45, remember that you don't have to lift it with the food in it. Another benefit that I really like is I can pack the food in the Engle basket and store it in my home refrigerator to keep it cool until I'm ready to transfer the food to the MT45 before heading out.

The MT45 is built tough with solid steel construction, which adds to the weight. I'd rather have a durable unit than one that can't take the abuse. I'm miles from civilization and I need reliability.

I read a few comments about the vibration. While I don't discount that the individuals may have gotten a particularly noisy unit, a hum is characteristic of the Engle "swing" motor compressor. The compressor has only one moving part, making it far more reliable and efficient than other designs. My MT45 does have a hum when running but it doesn't bother me. It's really not all that noticeable. It is certainly louder than my previous Dometic, which made no noise at all but, after all, it is a compressor design, which is far more capable than the absorption design of my former Dometic. It's going to make some noise. I'm happy to have cold drinks and food that isn't spoiled. That's the whole point in my estimation.

Overall, I'm very pleased with the Engle MT45. I wish I had purchased it years ago and avoided all of the challenges I've faced trying to keep perishables from perishing when out at research locations in the desert Southwest.

Save 30% Off

Right out of the box it had a constant hum whenever switched on. It also had a lot of vibration. Even when placed on a pad or a carpeted surface, it would still make a constant sound. Could be heard when I had it in the tailgate of my SUV and I was driving!

For several weeks I've been 'working' with Engel on resolving this. They said it's not uncommon. They believe it's caused by something in the compressor mounting shifting during transit. They first had me 'bang' it on each of it's sides while it was running. Then they had me open it up!...and directly hit the compressor with a rubber mallet, again trying it on each side (orientation) and with it running.

Nothing has made a difference. Each time I've spoken to them I've asked for return information so I can send it to them to be replaced or repaired (though I'd prefer a brand new unit just replaced). I think they're being cheap as they insist each time that they have something new to try that'll be easy. All I've accomplished is getting scuff marks on the outside of my unit as well as paint chipped on the compressor housing.

This is not a $20 item! And yet they treat their customers as it was. I would not recommend anyone to buy one of these. This is not a unique occurrence. I know this because Engel told me this! Also, if it was a rare occurrence, they wouldn't hesitate to have me ship it to them for repair. They obviously have a problem and are trying to resolve it as cheaply as they can and/or get people to give up on their grievance.

Friday, July 4, 2014

Whirlpool Kenmore Dryer Door Latch Kit 279570

Whirlpool Kenmore Dryer Door Latch Kit 279570
  • THIS 279570 WHIRLPOOL DRYER DOOR STRIKE AND LATCH KIT IS DESIGNED TO WORK WITH MANY WHIRLPOOL

  • GE AND MAYTAG DRYERS ALONG WITH MANY OTHER BRAND DRYERS.

    THIS DRYER DOOR LATCH KIT COMES

  • WITH ONE PLASTIC DOOR LATCH, AND ONE DOOR STRIKE. USE IT FOR YOUR GAS OR ELECTRIC CLOTHES DRYER.
  • Works with the following models: Whirlpool IGD4100SQ, Whirlpool LDR3822PQ, Whirlpool LE4930XKW0
  • Whirlpool LE5650XKW1, Whirlpool MGDE400XW, Whirlpool MGDZ600TW, Whirlpool WED8300SW0

The quality of this product seems fine. The manufacturer now recommends this part number to replace broken latches on my dryer. There is a selection of 'strengths' in this package (20,22 and 25). The problem is (as others have stated), these latches don't hold the dryer door shut. I tried matching the strength of the clip with what broke in my machine to no avail. I tried all of the other strengths, and they all allow the dryer door to pop open with wet clothes thus stopping the drying cycle. We have had to resort to taping the door shut or pushing something up against it. Sadly, I don't think this is a good replacement for the latches that came on the door in the original machine. Hope you have better luck than I did.

Buy Whirlpool Kenmore Dryer Door Latch Kit 279570 Now

This part fit my old Whirlpool Dryer perfectly. Installation is a breeze: Just snap out the old catch assembly with a screwdriver and pliers and snap the new part back in place for a secure fit.

It's important the dryer door closes tightly so clothes will dry quickly. When the door does not push the emergency stop button on the dryer's face frame, it's time for a new door catch/latch assembly and this is the part you need to keep your old Whirlpool "spinning"!

Read Best Reviews of Whirlpool Kenmore Dryer Door Latch Kit 279570 Here

My dryer wouldn't stay closed and I looked for a latch that would fit. I found this one and decided to go for it. It was a great choice. It was easy to install and I didnt have to take many parts off my dryer. Now I dont have to place things against my dryer door to keep it closed.

Want Whirlpool Kenmore Dryer Door Latch Kit 279570 Discount?

Fit just right! It even came with two other latches. Looked on You -tube for instructions on how to replace it. It was easy.

Save 30% Off

I have installed this piece about 6 months ago. It is better than the original one that came with the dryer. Also the package has different sizes to fit different models.

Sunday, June 8, 2014

Whirlpool Part Number 2180226: Bracket, Control

Whirlpool Part Number 2180226: Bracket, ControlYou can't get by without this part, it holds the water dispenser and the ice dispenser switches in place for the levers to activate them. I broke mine by popping the trim cover off, two spindly pins hold each switch in place, the two for the ice switch broke off, leaving the switch loose. Thankfully, pandorasoem has these, and yes, this is a real OEM Whirlpool part, so no worries. Easy to replace, once you have the trim cover popped off!

Perfect part for our broken ice dispenser. The product was exactly as described and compatible, as the original part # has been replaced by this current one. We are happily enjoying our ice dispenser!

Buy Whirlpool Part Number 2180226: Bracket, Control Now

Excellent product identical OEM part same as original fits the same highly recommend this part to anyone who thinks that they burned out their ice machine motor. It's simply the bracket is broken that holds the on and off switch that makes the ice machine motor run. Very easy to replace and install.

Read Best Reviews of Whirlpool Part Number 2180226: Bracket, Control Here

I purchased this fridge piece when mine broke. I installed it myself, and saved from paying a repair man. it was pretty easy to replace.

Want Whirlpool Part Number 2180226: Bracket, Control Discount?

My fridge is 11 years old, I broke this piece when I tried to install ice door chute. Didn't realize that amazon had this part. I grabbed one and it worked perfectly. The compatibility reference is really helpful. My fridge is not whirlpool, this part still works for it. Installation is easy, not necessarily plug n ply; but definitely can be done with DIY.

Tuesday, June 3, 2014

GE WR30X10093 Icemaker Assembly for Refrigerator

GE WR30X10093 Icemaker Assembly for RefrigeratorWorks fine as a replacement for older model ice maker with wire bin control. I was concerned that it might not work correctly as it is an updated model which uses a lever control and requires an adapter for the electrical connection. The adapter works but could be better designed as it extends the cable so it can be difficult to get the ice maker mounted flush. Overall I am pleased and the ice maker has worked perfectly since installed. It is a good substitute for the order model which is no longer available.

Googled this ice maker model and found a You Tube video on how to replace and it made the process very easy.

Buy GE WR30X10093 Icemaker Assembly for Refrigerator Now

The icemaker makes ice and dumps fine but after about the first two times the basket filled I discovered that the shut off lever does not always work properly when the bin is full. This model requires ice to push the lever back horizontally instead of shutting off when ice builds up on top of the lever. I have to manually move a switch to off position before it will quit making ice. I do not recommend this unit for my Kenmore fridge/freezer.

Read Best Reviews of GE WR30X10093 Icemaker Assembly for Refrigerator Here

the shutoff lever is not very functional

the cubes come out stuck together and cause problems with the ice dispenser

Want GE WR30X10093 Icemaker Assembly for Refrigerator Discount?

Tuesday, May 13, 2014

Whirlpool Part Number 2188507: Start Device, Combination (Start Relay and Overload) For Production

Whirlpool Part Number 2188507: Start Device, Combination For Production Compressor OnlyThis kit contained parts for two sizes of units and the "jumper wire" with the right connector to fit the new part. When installed, it fixed the refrigerator and it works perfectly again!

Save 14% Off

Tuesday, April 22, 2014

Whirlpool 2262181 Start Relay for Refrigerator

Whirlpool 2262181 Start Relay for RefrigeratorThought the old fridge was toast. With a little online research and some simple troubleshooting I was able to bring her back from the dead. This part doesn't look to be worth what it costs, but since it saved the old fridge, it's worth every penny!

Save 53% Off

Sunday, March 2, 2014

GE WR32X10398 Refrigerator Vegetable Crisper Cover

GE WR32X10398 Refrigerator Vegetable Crisper CoverIf you're reading this review than the side flanges of your tray have cracked due to the weak plastic tab they made it from, so your tray isn't supported in the fridge anymore. This replacement is just like they say, a perfect fit and stronger than the original. Its what they should have used in the first place!

I was a little worried when other reviewers stated the product wasn't like the originals from thier fridges. This one matches mine perfectly.

Buy GE WR32X10398 Refrigerator Vegetable Crisper Cover Now

Item arrived right on time but not the exact item I ordered. It is a different shape. Actually more modern but it actually fit!! I love it

Read Best Reviews of GE WR32X10398 Refrigerator Vegetable Crisper Cover Here

This crisper tray came in VERY quickly. Didn't look exactly as my old one, but with a VERY old refrigerator I wasn't really expecting that. This cover is even better than the old one. Much more sturdier and cleaning looking. Thanks!

Want GE WR32X10398 Refrigerator Vegetable Crisper Cover Discount?

Perfect

Easy to install and I didn't have to call for an appliance repair, great savings and this made my tenant happy!

Save 50% Off

Wednesday, October 9, 2013

LG Electronics LFC23760SB 22.6 Cu. Ft. French Door Bottom Freezer Refrigerator, Smooth Black

LG Electronics LFC23760SB 22.6 Cu. Ft. French Door Bottom Freezer Refrigerator, Smooth Black
  • Internal Upfront Digital Temperature Controls
  • Automatic CustomCube Ice Maker
  • 4 Split Spill-Protector Tempered Glass Shelves
  • Dimensions: (WHD) 32 7/8 X 70 3/8 X 34 1/4 In.

This is the biggest piece of garbage I have ever purchased. I thought the LG name stood for high quality products but not in this particular case. The freezer handle continually comes off, the top handle is always loose, and the magnets doesn't keep the doors sealed. Generally speaking it's poorly constructed. Never buy LG again

Buy LG Electronics LFC23760SB 22.6 Cu. Ft. French Door Bottom Freezer Refrigerator, Smooth Black Now

My entire life I have only known the standard, freezer door on top, one giant door below, refrigerator. About a year after we moved in to our house, it was time to buy a new refrigerator and there was a lot of things to like about this LG fridge.

Pros:

Width we had a very set width we were working with, and at the time, this was one of the few french door models that would fit the size we needed.

Looks overall, the fridge is aesthetically pleasing.

Size the ability to adjust all the shelves and door compartments really allows you to maximize the internal space for your family's needs

Function things are the right temperature and the freezer freezes. It's a fridge, it does what I hoped it would.

Freezer I know from an energy standpoint the whole freezer pulling out, might not be the best, but if you want your freezer on the bottom, it's the best way to access it so you don't have to get on the ground to look in there.

Cons:

The doors require being PUSHED shut. Our guests leave the fridge open all the time. There is a door alarm which is a pro only because of this problem.

You need some extra space for the doors to open beyond the width requirement. Our one door is not able to open fully for this reason. Both doors have hinges that open just a little wider than the fridge itself.

Ice-maker it works fine, but there's no filter for this fridge so your ice is only as good as your tap water.

Overall:

For our first refrigerator, we have been extremely happy with it. A couple minor quirks, but a lot of nice features and we got it a price lower than what is listed currently. After reading the other reviews, I just went out and gave all the handles a good tug, and they are all sturdy on my model. No complaints there. Based on my use, I would recommend it.

Read Best Reviews of LG Electronics LFC23760SB 22.6 Cu. Ft. French Door Bottom Freezer Refrigerator, Smooth Black Here

We got a very similar LG model 3 years ago. No major problems, but...

Door Closing: Unlike most refrigerators, you need to actively push the doors closed each time. Guests botch it. And household regulars miss it once in a while even after 3 years. The well designed door alarm resolves it usually, but not always. An active family is going to open and close the fridge door 80,000 times in 10 years. This minor hassle is not so minor.

Bottom Freezer: The model has a good energy efficiency numbers, but I wonder if those are closed-door tests. This one pulls the whole freezer drawer out into the room. Air circulates top, bottom, left, and right. It feels like a crazy amount of energy wasted every time.

Bottom Freezer--Part 2: The freezer also demands active closing attention. Once in a great while it's left 1/3 inch open...not enough open to trigger the alarm, but enough to tick you off when things are mushy the next morning.

Bottom Freezer--Part 3: The handle is about to break. There's a cracking sound every time we pull on it. Probably from having to pull extra hard when the roller-gear mechanism iced up due to Part 2 above.

Lots of good things about this fridge, and no fridge is perfect. But I think the french door + bottom freezer design has more hassles than benefits.

Want LG Electronics LFC23760SB 22.6 Cu. Ft. French Door Bottom Freezer Refrigerator, Smooth Black Discount?

This refrigerator was purchased to replace a perfectly good refrigerator; we had built a retirement home and wished to start with all new appliances. Sadly we purchased all LG appliances and regret that decision on a daily basis. This is NOT a heavy-duty traffic home but a senior citizen household of two. The refrigerator is the worst of the poorly-built, poorly performing appliances. Two plastic bins on the refrigerator broke within months of use. The icemaker quit working within the first year. The freezer must be manually defrosted (by turning off the entire unit) as ice builds up in sheets because the freezer door does not form a tight seal (thereby negating the touted energy savings). Its saving grace is that it is beautiful to look at, but Beauty Is as Beauty Does. DO NOT BUY LG PRODUCTS.

Tuesday, September 24, 2013

Vinotemp 60 Bottle Wine Cellar, WhiteVinotemp 60 Bottle Wine Cellar

Vinotemp 60 Bottle Wine Cellar, White
  • Automatic interior light
  • Security lock
  • Double paned insulated glass door
  • Double-paned, insulated, glass door; interior light; security lock
  • Measures 24 by 23-1/4 by 34-1/2 inches

I purchased this item (in black) from Amazon.com and was so disappointed that I ended up returning it. Kudos to Amazon. They paid for return shipping and even reimbursed me for additional packing materials I needed to buy. Now, on to the review.

If you know a little about wine storage, you know that the ideal temperature for red wine storage is 55 degrees (Ideal drinking temperature is 60F). This is important, because if like me, you are purchasing the fridge for red wine storage only, you need to know that only the top 2 shelves maintain this temperature. With the digital thermostat set to 55, the mid and lower sections will drop an additional 10 degrees or more. Way too cool for red wine. So, immediately, your storage capacity is reduced from 60 bottles to say 12 (depending on bottle size).

In the end, I purchased a much smaller fridge, capacity 16 bottles. Because of its small size, it maintains almost the same temperature throughout (top to bottom). When I need more storage, I will buy another small wine fridge. A slightly more expensive option is to buy a fridge with an interior fan (to circulate the air), but these are hard to come by in this price range. If you are really serious about your wine, you'll want humidity control (which this fridge doesn't have). 55-75% humidity is ideal for wine storage as it prevents the corks from drying out and spoiling the contents.

The next major problem with this fridge is the racking. I placed two bottles of wine on the top shelf. The bottles dropped through the racking, and came crashing to the bottom of the fridge. I'm not sure what the interior is made of, but the impact of the bottles left two large dents in the floor of the fridge.

Of the dozen or so wine fridges I've looked at in the past few months, this has to be the worst.

Richard McGrath

Buy Vinotemp 60 Bottle Wine Cellar Now

I have owned 2 Vinotemp products that quit working properly within 18 months of purchase: a 24-bottle wine cellar that stopped working entirely at 18 months and most recently, the 60-bottle (Model VT60) that started malfunctioning just after the 12 month warranty expired.

Vinotemp was of no use nor would they stand behind their product. No one locally services the Vinotemp product, leaving the buyer to work on thier own unit if necessary. Vinotemp didn't provide proper technical information (NO customer support to speak of), nor would they return phone calls. Vinotemp advised me I needed one part, when in fact, I really needed another. Although they made the errors, they wouldn't take the part back unless I paid for shipping, and I was subject to a 35% restocking fee. Even though I have correspondence from them stating what I needed, they claimed I gave them the wrong information. Even their CEO tried passing the blame, and it was her email that initially gave me the wrong technical information!

Vinotemp communicated to me that these units are produced in China to meet customer requests for smaller units, and because they aren't manufactured directly by their high-end factory in Los Angeles, the customer gets what they pay for! Nice to know that Vinotemp is giving their cutsomers a single finger salute! After months of trying to deal with them, I just threw out the wrong part in frustration and purchased a different unit from another manufacturer.

As for the capacity of the VT60, it does not hold 60 bottles unless you're storing nothing but Pinot Noir/Burgundy and/or Chardonnay bottles (for those who aren't familair with the difference, think tapered bottles versus bottles with "shoulders", which include Cabernet Sauvignon/Bordeaux bottles). You will NOT be able to store 60 bottles if you have a combination of Cab and Pinot bottles. If holding capacity is truly a concern, research other units to ensure you can store what the manufacturer claims you can based on your storage needs.

Bottom line...buyer beware. In my experience, you'll only get 18 months at best out of their product, and Vinotemp failed to stand by or support their product. They refused to accept responsibility for their errors and apparently expect their customers to be experts on the Vinotemp product to be able to walk their Service Dept people through the replacement part ordering process. I suggest you look at another manufacturer. Your time, money, and frustration-level will be better served elsewhere dealing with a company that markets a reliable product who values the ideals of customer support and brand loyalty.

Read Best Reviews of Vinotemp 60 Bottle Wine Cellar Here

I bought one of these. It stopped working after about 18 months.

Vinotemp would not recommend anyone for service. Called someone, who got the wrong part twice. Called someone else, he (I hope) figured out the right part. Vinotemp will not send part without signed and faxed papers. Part and shipping is under $30.

Vinotemp appears to me to be a rinky dink outfit whose stuff is hard to service.

Want Vinotemp 60 Bottle Wine Cellar Discount?

I purchased this item from Amazon.com and was so disappointed that I ended up returning it. Kudos to Amazon. They paid for return shipping and even reimbursed me for additional packing materials I needed to buy. Now, on to the review.

If you know a little about wine storage, you know that the ideal temperature for red wine storage is 55 degrees (Ideal drinking temperature is 60F). This is important, because if like me, you are purchasing the fridge for red wine storage only, you need to know that only the top 2 shelves maintain this temperature. With the digital thermostat set to 55, the mid and lower sections will drop an additional 10 degrees or more. Way too cool for red wine. So, immediately, your storage capacity is reduced from 60 bottles to say 12 (depending on bottle size).

In the end, I purchased a much smaller fridge, capacity 16 bottles. Because of its small size, it maintains almost the same temperature throughout (top to bottom). When I need more storage, I will buy another small wine fridge. A slightly more expensive option is to buy a fridge with an interior fan (to circulate the air), but these are hard to come by in this price range. If you are really serious about your wine, you'll want humidity control (which this fridge doesn't have). 55-75% humidity is ideal for wine storage as it prevents the corks from drying out and spoiling the contents.

The next major problem with this fridge is the racking. I placed two bottles of wine on the top shelf. The bottles dropped through the racking, and came crashing to the bottom of the fridge. I'm not sure what the interior is made of, but the impact of the bottles left two large dents in the floor of the fridge.

Of the dozen or so wine fridges I've looked at in the past few months, this has to be the worst.

Richard McGrath

Save 26% Off

This thing worked fine for a couple of years--then I came home to find 7 bottles of wine frozen solid! No warning, no sign of any problems except a little bit louder noise from the compressor. Vinotemp literally laughed over the phone--all they cared about was whether it was still under warranty. Absolutely no concern, no ownership of the problem. I'll never buy another product from them and I recommend you don't either. What idiot would build a wine cellar that even has the capability to freeze? What a lousy product. I bought the damn thing to keep wine from going bad and now I have 7 bottles ruined for sure and 51 more that are probably not worth drinking.

To the reviewer who "disagreed" with other reviewers who'd described problems--watch out! I would have written the same thing last week. Now I know better.

Tuesday, July 16, 2013

GE GSWF Refrigerator Water Filter, 1-Pack

GE GSWF Refrigerator Water Filter, 1-PackIt was time to replace the water filter in our GE Cafe refrigerator. As is typically the case, Amazon was the most economical source to purchase.

I've been in the water industry for a long time now and I sell many different types of water lfiltration equipment. I'm actually certified by the Water Quality Association as well. I've tested this carbon filter with a chlorine test strip to see the longevity of the filter for my refrigerator.

Well, my refrigerator light indicated it needed to be replaced after about 6 months but even then I tested the water and it showed up to be fine. Another 3-4 months go by and I'm still testing the water for chlorine and it still passes. I've even checked for any kind of dumping which there was nothing.

Overall it's a good carbon block filter and lasts much longer than the stated refrigerator light indicator but then again we have a house hold of 2.

Buy GE GSWF Refrigerator Water Filter, 1-Pack Now

This is the correct manufacturer-spec replacement for the water filter in GE refrigerators that need the GSWF filter. It works great and makes the water taste better.

Read Best Reviews of GE GSWF Refrigerator Water Filter, 1-Pack Here

Exactly as expected... Interesting that a 3pack is a few dollars more than 3 individually purchased. Math on the 2pack is even higher per unit price. ?? Anyway exactly as ordered/delivered on time no complaints.

Want GE GSWF Refrigerator Water Filter, 1-Pack Discount?

This appeared to have been a returned item. Foil covering was off filter end and the standard instruction leaflet was missing from the box. Not very sanitary to install a water filter that apparently was handled by a stranger.

Save 42% Off