Showing posts with label refrigerator picture frames. Show all posts
Showing posts with label refrigerator picture frames. Show all posts

Wednesday, October 15, 2014

LG SteamDryer Series DLEX3470V

LG SteamDryer Series DLEX3470VAfter reviewing Consumer Reports for several other dryers on the market, I ended up with this one. It seems like all the dryers on the market were OK at best considering the top scores on Consumer Reports were in the 80s. I decided on the LG because of the features and as a set for my LG WT5070CW washer.

My old dryer was a huge upright closet/dryer by Maytag. Since I always lie my clothes or hand dry I though the feature would be awesome in a dryer. That Maytag was huge and did everything but dry my clothes.

The LG is small in size for such a large capacity. It has a lot of features that are somewhat intimidating. It has a rack I can place inside the cylinder to lay clothes flat to dry. It also has a steaming option, which I have used and it is just OK. I didn't decrease my rating because of this because I rarely use steam and I didn't buy the dryer for this feature at all. I have placed large items such as rugs and comforters and have no problems with the dryness. I do, however, like to take out my clothes right when then are still a little bit damp but nearly dry to avoid shrinking. I have had no complaints about the dryer being harsh on my delicates or not getting my clothes dry timely. Just one suggestion and that you must clean the lint trap after every use like the instructions state. For some reason, clothes you think will not provide any lint still do.

I think this is a great dryer for the price. It's only 6 months, but I hope this machine will last me at least 5 years or more!

Saturday, September 6, 2014

Whirlpool Front Tub Seal Bellow 8181850

Whirlpool Front Tub Seal Bellow 8181850
  • WITH VENT. 5/16-INCH HOLE. FRONT TUB SEAL OR BELLOW FOR FRONT-LOAD WASHERS FROM KENMORE, WHIRLPOOL
  • AND OTHERS
  • Works with the following models: Whirlpool 7MGHW9100MW0, Whirlpool GHW9100LQ0
  • Whirlpool GHW9100LQ1, Whirlpool GHW9100LW0, Whirlpool GHW9100LW1, Whirlpool GHW9200LQ0

It took me a while and surely wasn't as easy as everything all the repair guys made it look on YouTube. Go there first and use patience. I took apart most of the washer and then realized I didn't need to. Depends on which video you watch.

Buy Whirlpool Front Tub Seal Bellow 8181850 Now

Perfect fit & from what I was quoted by a local service technician, fixing it myself saved my at least $200!! The installation took less than 1 hour, with the last 30+ minutes struggling with the cable affixing the seal to the door frame. This step could have taken 3-5 minutes if I'd had a 3rd hand (or a helper of course). See the following link for repair

Read Best Reviews of Whirlpool Front Tub Seal Bellow 8181850 Here

My 10yo gasket had holes and I was tired of trying to patch it. I was considering junking the machine but decided to try to put a new seal on. My unit is stacked in a cubby so I knew I did not want to take it all down to remove the top and front and I heard online that some people have successfully replaced all through the main opening.

1. Remove outer spring.

2. Push old seal in towards tub and remove it from water feed tube at 10:00 and spray tube at 12:00 (if you have it)

3. Push old seal all the way into middle of tub exposing the outside edge where it hooks to tub.

4. find bolt on metal ring at 2:00. I used a 9/32 screwdriver socket clamped in a small visegrip plier to loosen bold a couple turns.

5. Once ring is loose, remove ring and set aside.

6. Remove old seal from tub.

7. Take new seal and put some dish soap on inner edge where it will mount on tub.

8. starting at top, place edge of seal over ridge on tub mating the surface. work around tub seating edge as you go (I had my daughter hold the edge I had already done so it would not come off as I worked my way towards the bottom).

9. once seated, while holding edge push outer part of seal into middle of tub so you have room to work (it should now look like it did in step 3 (may need a second set of hands here)

10. slide large ring clamp over seal and set it in groove where it goes. Make sure seal is well positioned, feel around edge with fingers.

11. tighten bolt on ring clam as many turns as you had loosened do not over tighten.

12. pull out seal from middle of tub, using a little dish soap for lubricant re-insert fill tube and spray tube (MAKE SURE upper fill tube is well seated at bottom of dispenser (mine was loose))

13. hook outer part of seal over outer rim and re-install spring removed in step 1. (second set of hands helps here, although I've done it fine myself. use a small tipped screwdriver in each hand to spread spring enough to snap it into groove and finish seal)

No leaks!

I did get some fine gray rubber powder on seal, I think it is from metal drum on spin cycle rubbing against new edge on seal, after the first couple washes I wiped this off and I have not found any more.

Want Whirlpool Front Tub Seal Bellow 8181850 Discount?

bought this to replace the torn bellow in my front loader. Fit was exact.

you need to open the top and front of FL in order to replace it, but videos can be found online that show how to dyi

Finding parts can be difficult until you discover that there are several makes and models that are essentially the same; in my case Kenmore. Perfect fit and I now have that new washer smell!!!

Sunday, June 15, 2014

Haier HVTM16ABB 16-Bottle Wine Cellar with Electronic Controls

Haier HVTM16ABB 16-Bottle Wine Cellar with Electronic Controls
  • Up to 16 bottle capacity
  • Perfect for both red and white wine
  • Compact size with a small footprint
  • Electronic controls with blue led display
  • Recessed handle

This wine cellar chills wine very well, has a great look, and is fairly quiet. The only drawback I have found is that the bottom four bottles sit on the floor if the unit, and there is no rack to keep them from rolling around.

Buy Haier HVTM16ABB 16-Bottle Wine Cellar with Electronic Controls Now

Other reviews have commented on the noise and gone back and forth. I have to agree with those who say it's loud, so put it somewhere it won't bother you. That said, it's an attractive fridge that was inexpensive. Fit the bill for what we were looking for, and we have another wine cellar for bottles that are more expensive / won't fit because they are the "Burgundy" style of bottle rather than smaller Bordeaux style.

Read Best Reviews of Haier HVTM16ABB 16-Bottle Wine Cellar with Electronic Controls Here

this is a GREAT looking wine cooler that will look great in whichever room you choose to put it in, its quieter that i was expecting but some people would say its too loud. i put it in the living room so the sound does not bother me at all. love the light on/off switch.very easy to set, great price, does the job! i would recommend this product to anybody that wants to protect their wine and be affordable at the same time.

Want Haier HVTM16ABB 16-Bottle Wine Cellar with Electronic Controls Discount?

When I got the cooler, shipping was very quick it was well packaged and in good shape. The cooler appears very well built and looks nice in the room. All the features worked and I liked the blue lighting effect it has.

I was not quite as happy when I realized it could not cool the wine below about 53F-54F in my room. I like to choose the temperature, so this was a restriction I did not expect.

This cooler replaced a worn out 20 year old conventional type cooler and the first thing I noticed was that it was quite a bit noisier than the old compressor/refrigerant type cooler, with a high-pitched fan noise pretty much continuously running. In addition, the pitch of the fan changes thus calling more attention to it.

I decided to try keeping the cooler to see if I could get used to the fan noise and over the last week, I seem to notice it less. I hope I get used to it as I hate to go to the trouble to send things back.

Save 8% Off

There are both pros and cons for this device. First, it is very light. That can be both a pro and a con. It's a pro in that it's easy to move around but it's also a con because it betrays that it's thin, probably not very well insulated, and not made out of the highest quality components.

It is a simple enough design: one can see a small, plastic fan not unlike the kind in computer towers (probably easily replaceable) in front of a thermoelectric heat exchange grille. The heat exchange emits a constant, low hum doing whatever it is that it does (it's honestly about the same timbre and amplitude as the air pump on a fish tank), and occasionally the fan will kick on if the thermostat registers that it is in need of a little extra boost to maintain the temperature. Other than that, it's a black box with a glowing blue number on it.

The design is very attractive, the window is a high gloss (picks up fingerprints if you put your hand NEAR the glass it seems), and the shape is roughly cubic. The racks are thin metal but do not seem to visibly sag even when fully encumbered. I experienced none of some of the complaints about bottles not fitting on the racks; I find it to be efficiently sized and seems to take Burgundy and California Cabernet bottles equally well. The tallest bottles I had, some full sized sherry bottles, threatened to not fit, but in the end was not a real concern. I added some pre-cooled bottles almost to capacity and the temperature changed rapidly and has stayed quite consistent ever since I plugged it in.

Perhaps the biggest overall concern I have with the design is that the fan is not separated by much clearance from the backs of the bottles, which might be a liability when the machine has to work extra-hard to maintain temperature; if the exchange holes in the back are blocked, I could see it overheating really easily. In my case I've just added some thin half bottles in the middle two slots on the top two shelves and piled the heavier, thicker bottles around the edges. One could probably also face those four bottles neck-in to allow for more air circulation anyway. Regardless it may be worth it, if one plans on keeping it fully loaded, to alternate neck-in and neck-out to allow for easier air circulation around the bottles. I wouldn't consider this so much a design flaw so much as just prudent utilization of a design optimized for high capacity/low volume.

The only major complaint I might be tempted to make is the inadequate lighting. There is a light feature, which is nice, but it is just 4 small blue-white LEDs at the top of the unit. If the unit is full, you can't see the contents very well with the light unless it is very dark in the room.

All in all though it is a remarkable deal. There's not a terrible lot that can go wrong inside this thing because there isn't much inside this thing. We'll see how it stands up in the North Carolina summer, but so far I don't have any major complaints!

Sunday, March 9, 2014

Frigidaire Refrigerator Door Gasket Seal 218730610

Frigidaire Refrigerator Door Gasket Seal 218730610This gasket was delivered way faster than expected. I was easy to install and was the correct gasket for my refrigerator. I am very pleased with this refrigerator gasket.

Gasket came in an inadequet small package cramped and folded in a clumsy manner. The magnet is very weak and doesn't do the job. It looks like some left over from many years ago. My old gasket performed far better than this cheap product. I wouldn't buy from this seller.Frigidaire Refrigerator Door Gasket Seal 218730610

Buy Frigidaire Refrigerator Door Gasket Seal 218730610 Now

Sunday, January 5, 2014

Whirlpool Part Number 626676: Motor

Whirlpool Part Number 626676: MotorThis part was four times as much from the company web site. It arrived quickly as worked perfectly, saved us a lot of money.

I ordered this control module for my 2005 Kitchen-aid Fridge. The ice maker stopped working and after a little internet research, concluded that the module was bad. Turns out that the components of many refrigerators are made by the same suppliers and in use for a variety of models. I removed the module and used the part number printed on the motor to find one that matched. I installed it the day it arrived and had a full ice bin the next morning. It was very easy to replace and I saved a fortune doing it myself. Buy Your Parts had the best price by far.

Buy Whirlpool Part Number 626676: Motor Now

This product works great. The manufacturer wanted double for the same part. I installed it with ease. Everything matched up perfectly. I was concerned that it was defective at first because the motor would not turn on, but come to find out it was nothing more than the ice maker being on a timer of sorts. I left it on overnight and the next morning VIOLA ICE!!! So nice not to have to run to the store to buy a bag of ice any more.

Read Best Reviews of Whirlpool Part Number 626676: Motor Here

Sunday, October 6, 2013

3 Pack, Water Filter WSS-1 filter for Samsung DA29-00003G B Replacement for Samsung by Water Sentin

3 Pack, Water Filter WSS-1 filter for Samsung DA29-00003G B Replacement for Samsung by Water Sentinel, WF289This filter works as advertised, and is reasonably priced. Would recommend it for anyone looking for

a good Samsung refrigerator filter.

I WAS VERY SATISFIED WITH THE ABOVE PURCHASED WATER FILTERS. THE SHIPPING WAS ALMOST INSTANT AND THE PRICE COULD NOT BE BEAT, IN FACT IT IS MUCH MORE AFFORDABLE THAN BUYING IT AT THE STORE WHERE WE PURCHASED OUR REFRIGERATOR. THE FILTER IS EASY TO INSTALL AND FILTERS OUT ALL IMPURITIES THAT YOU WOULD GET FROM CITY WATER. THANKS FOR MAKING THESE AVAILABLE FOR FOLKS THAT ARE ON A FIXED INCOME. I WILL PURCHASE FROM YOU IN THE FUTURE.

Buy 3 Pack, Water Filter WSS-1 filter for Samsung DA29-00003G B Replacement for Samsung by Water Sentin Now

Monday, September 16, 2013

Kenmore Refrigerator Filter Water and Ice 46-38447

Kenmore Refrigerator Filter Water and Ice 46-38447
  • Replacement filter Kenmore 46-38447
  • Manufacturer: Kenmore

This is exactly what we ordered & a lot better price than what we pay at Sears. Thanks for a great product.

Buy Kenmore Refrigerator Filter Water and Ice 46-38447 Now

The product is a great value over a store brought filter. I used the existing connections and turned on the water.

Read Best Reviews of Kenmore Refrigerator Filter Water and Ice 46-38447 Here

Good filter easy to install, when you do install be careful and don't loose the small clips that lock in the supply line and when you turn water on it will be black for a little while but will go away because it is a charcoal filter

Tuesday, August 13, 2013

Samsung Refrigerator Water Filter (DA29-00020B), 3-Pack

Samsung Refrigerator Water Filter, 3-PackThese filters fit my Samsung refrigerator perfectly and keep my water tasting fresh for months. Great value at a good price.

on-time, decent price and is exactly what I ordered. I would order this product again if it's still available in 1.5 years when I run out of filters again.

Buy Samsung Refrigerator Water Filter (DA29-00020B), 3-Pack Now

Sunday, July 21, 2013

NFL Green Bay Packers Counter Top Refrigerator

NFL Green Bay Packers Counter Top RefrigeratorPurchased my first fridge arrived poorly packaged and when I opened it it the decal was scratched/ripped about 3-4 inches on the sideand there was a dent in the fridge. I travelled back to the states to return it via the UPS store. Second fridge arrived securely packaged when I opened it the decal was ripped again and the fridge did not work. Returned to the states and returned via UPS again.I lost approx 80.00 in gas travel time toll fees and my duty, I e-mailed amazon about my loss and the company that made the fridge. No response from either. Very disappointed in the product and not getting responses on my loss of money.