- Reduces odor and chlorine from ice makers and water dispensers
- Reduces rust and sediment
- Easy to install, push in fittings for use on 1/4" plastic tubing or copper pipe
- Improves taste
- Change every 6 month or 1,700 gallons
First I ran some water through it to get the excess carbon out. I then pulled my fridge away from the wall and unplugged it. Then I removed the plastic 1/4" water line from the fridge and cut it about 6 inches from the end. I then pressed in the piece i cut on one side of the filter and pressed in the line from the wall into the other side of the filter. (Make sure you get the flow of water through the filter correct) Then i just plugged the short line into the fridge again and plugged the fridge back in. So far the ice looks significantly cleaner and its tastier.
I will update if anything goes bad.
P.S.
Everything on the packaging is in German. I cannot understand anything, thats how easy it is to install it.
No comments:
Post a Comment