Wednesday, April 30, 2014

GE WR17X11440 Water Tank Dispenser Assembly for Refrigerator

GE WR17X11440 Water Tank Dispenser Assembly for RefrigeratorI had a crack in my old water tank, so I used this tank and got a couple of 5/16 straight plastic couplers and spliced it in place.

Pretty simple and easy to install, no more leaks in my refrigerator! much cheaper than GE website.

I recommend it

Buy GE WR17X11440 Water Tank Dispenser Assembly for Refrigerator Now

great fit!! very easy to install and no leaks, every thing mounted great in the fridge and fridge fixed=wife happy lol

Read Best Reviews of GE WR17X11440 Water Tank Dispenser Assembly for Refrigerator Here

Finding which part to order for our refrigerator and a video or other instructions on how do to the installation was hard! After that ordering and installing the part was easy. This part worked exactly as expected as a replacement for a leaky water tank reservoir.

Want GE WR17X11440 Water Tank Dispenser Assembly for Refrigerator Discount?

Easy to install & direct fit. YouTube it to see how easy to replace this is. Fixes leaky water dispensers that leak into the fridge

Save 12% Off

Allavino MWR-1271-SSR 132 Bottle Wine Cellar Refrigerator - Stainless Door Frame

Allavino MWR-1271-SSR 132 Bottle Wine Cellar Refrigerator - Stainless Door Frame
  • Built-in wine cellar with up to 122 bottle capacity
  • Black Cabinet with Stainless Steel Frame glass door. Hinge is on the right. Door is not field reve
  • Security Lock and tinted glass door ensure your collection is kept safe
  • Blue LED lighting beautifully illuminates the interior without the heat created by an incandescent b
  • Roller-glide shelves extend effortlessly minimizing agitation to the wine

WARNING! The capacity of this model is grossly misrepresented and overstated. First, the bottom 2 shelves are shorter than the other 10, so there's no way to put 11 750 ml bottles on either of the bottom 2 shelves. Also, there isn't adequate space between any of the shelves, so when one shelf is full the wood slats bow down and hit the bottles on the shelf below. So when you open one shelf it drags out the shelf below/above. Third, it doesn't fit MANY non-Bordeaux shaped bottles, especially fat bottomed Syrah and Champagne bottles. So you will have to completely remove a shelf in order to fit those types of bottles. By the way, other websites indicate this model only holds 122 bottles. I got 80 into my unit. I would NOT recommend this brand. Really disappointed.

Buy Allavino MWR-1271-SSR 132 Bottle Wine Cellar Refrigerator - Stainless Door Frame Now

Functions perfectly and looks great! It's very quiet and keeps my vino at just the right temp! I highly recommend.

Silent 6 Bottle Touchscreen Wine Refrigerator

Silent 6 Bottle Touchscreen Wine Refrigerator
  • 6-bottle capacity
  • Adjustable temperature range: 46-66°F
  • 3 pull-out chrome shelves
  • Enhances counter areas with designer styling
  • Interior LED lighting

I purchased the Wine Enthusiast wine refrigerator (cooler) about a month ago and am happy to say so far, so good. I am thrilled with its performance, appearance, and size. Got it on sale for a great price too.

Thanks, Wine Enthusiast and Amazon.com

Buy Silent 6 Bottle Touchscreen Wine Refrigerator Now

Ibought this item and it is working OK and silently. The lowest temperature I can set is 18C, and I believe that this is not OK for white wine. As I am not a big fan of whites, I will rate is as a four star

Read Best Reviews of Silent 6 Bottle Touchscreen Wine Refrigerator Here

8 Months ago, my friend left the country and left my 6 bottle of expensive red wine ($3000) worth. I don't have any wine cooler at the moment. After a quick research online, I order this product. It's been quiet, functioning since then. It also looks good. I wish I could put more bottles in it.

Want Silent 6 Bottle Touchscreen Wine Refrigerator Discount?

I got this unit to replace the VinoTemp model that I purchased a year ago. The Vinotemp only lasted a year and then it quit cooling and I spent 2 months and more money than I should have to try and fix it. Vinotemp is not a customer service company so with that being said I am already really please with the Wine Enthusiast model. I think it is an excellent value for the price and if it quits in a year; I will more than have gotten my money out of it. It is quiet, looks great on the counter and is actually smaller than the Amazon measurements online which I like. It cooled really fast had to wait almost 2 days on the other brand. The only disapointment so far is that I like to use the vacumn tops on opened bottles and the door will not shut completely. I have to put a single bottle on a shelf by itself if it has a vacumn top and turn it diagonal to shut the door.

This refrigerator is the perfect size; it doesn't take up too much room on my wet bar and it the height fits perfectly under the cabinets. Wine just tastes better with a little chill to it!

LG LDG3015ST 30 Freestanding Gas Range 5 Sealed Burners, Self Clean, Stainless Steel

LG LDG3015ST 30 Freestanding Gas Range 5 Sealed Burners, Self Clean, Stainless Steel
  • 30" Freestanding Gas Range with 5 Sealed Burners
  • 2.2 cu. ft. Upper Oven, 3.9 cu. ft. Lower Oven
  • 2 Standard Racks with 7 Positions
  • 12 Hr. Automatic Shut-Off
  • Self-Cleaning (Upper and Lower Ovens)

My range came in a somewhat timely manner, not quite as quickly as some of the items I've purchased at Amazon though. It came undamaged, which I was a little nervous about after I'd read some of the other reviews, but mine was perfect and dent free. It's an attractive range and I love the smaller oven on top for broiling and smaller baking jobs. The touch controls are pretty easy to figure out. My only complaint with the Range is that it seems to take longer to heat to cooking temps than my old Range did. It came natural gas ready and we use propane but the jets to covert came with it, as did easy instructions to change it over. All in all a great Range though and I'd buy it again!!

Buy LG LDG3015ST 30 Freestanding Gas Range 5 Sealed Burners, Self Clean, Stainless Steel Now

Love this stove! It is really fun to cook on. Easy to install. Haven't had the chance to use the ovens much, but I can't wait until the holidays!

Tuesday, April 29, 2014

MicroLux Freestanding Ice Maker Cold Hot Water Dispenser / Machine - ML560BK

MicroLux Freestanding Ice Maker Cold Hot Water Dispenser / Machine - ML560BKWe had a water cooler already but I wanted an ice maker and our refrigerator does not have the capability to have one put in (and the freezer is always full so there's never any room for trays). I saw this wtare cooler / ice maker and while it is costly it does serve 2 purposes. We received it on Friday and my husband did as instructions said as far as taking some things apart to clean, etc... before use. Afterwards he put water bottle on top and within minutes we had ice. Everyone in the house LOVES this machine. Fresh water as usual and now ice at anytime. We haven't run out of ice yet because it senses when it is getting low and makes more. Worth the price to me!!!

Recieved my cooler and plugged it in. Next day no ice. Day after no ice. Checked manual for troubleshooting. Said leave unplugged for eight hours. I left it unplugged for 24. Still no ice a week later. Asked for a return four days ago. Still no response from seller. Will update this review if anything happens. Bad product and poor customer service response time from seller all to report so far.

UPDATE: Seller finally got back to me. They wanted me to pay return shipping on the defective water cooler. I said no and they agreed to pay. Turns out I was up against the 28 day warranty. Seriously, I was told 28 days! I received a refund after a bit of hassle. Customer service wasn't bad just highly unorganized I think.I was told by the technician on the phone my problem was a common one. That surprised me since the add states they are tested before they leave the warehouse? I guess not well? I was told a replacement would ship out within 24 hours. Two weeks later I was told they were backordered and I would get it in a month and a half or so. After I requested a refund it was processed quickly and easily though. No problems there.

Buy MicroLux Freestanding Ice Maker Cold Hot Water Dispenser / Machine - ML560BK Now

The water cooler / ice maker is a great addition to our remodeled kitchen. We can now have ice that is made from bottled water and the design of the unit goes with our new décor.

The only negative is that the machine is noisy. It does not run all of the time but when it does you can really hear it.

The noise is a small price to pay for the convenience of the unit.

Read Best Reviews of MicroLux Freestanding Ice Maker Cold Hot Water Dispenser / Machine - ML560BK Here

overall it has been good so far. only time will tell if it is an ok or great machine. jury is still out.

Want MicroLux Freestanding Ice Maker Cold Hot Water Dispenser / Machine - ML560BK Discount?

This is the one that I wanted to have for a long time. It's very good one. I love it

Save 31% Off

GE WR51X10101 Defrost Heater and Bracket Assembly for Refrigerator

GE WR51X10101 Defrost Heater and Bracket Assembly for RefrigeratorI was a little hesitant ordering this knowing that it wasn't a GE-manufactured part. However, it seems to be constructed nearly identically, and the dual-element design (over the original single-element) seems to be more effective during the defrost cycle. I watched a youtube video (search for 'Refrigerator Defrost Heater GE WR51X10101' on youtube) in order to verify my install. It was pretty straightforward, and indeed the dual-element heater fits with no problems in place of the single-element heater. So far, so good. I'll update my review in case of early failure.

Kit had everything needed to retrofit the original single element heater like a glove. Easy to install. The original single element heater failed after five years, the replacement single element also fail in five years, so we going to see if this new dual element design has a longer life than the original equipment. There is a reason why the design has gone from single to dual element.... for longer life.

Priced at $4 is a great deal compared to other suppliers. It is packaged in a GE boxed piece of equipment. The only thing is that the heater is giving off a bit of a 'burning' smell. I'm hoping that this 'smell' goes away after a little time as the heater's coating is 'burned' off...... we'll see.

Great price, better design, complete retrofit kit, easy to install, quick standard shipping time,

Buy GE WR51X10101 Defrost Heater and Bracket Assembly for Refrigerator Now

Had a GE refrigator for 6 years and doesn't cool at all. Got a mechanics to check, asked for 600 worth of repair. As he is a friend's friend, I paid 100 for the diagnostics, which I found later is a rip off. Then I checked myself and diagnosed that the defrost hearter is the problem. Bought a pair just in case and install like in 15 minutes. Our refrigator is small, so be careful install and don't drop your bolts. After repair, the refrigerator works like new again. And still I have an extra for future repair as I heard those OEM ones last only couple of years.

Read Best Reviews of GE WR51X10101 Defrost Heater and Bracket Assembly for Refrigerator Here

Double element heater was an improvement over the original single element. Installed easily without having to splice wires. Fixed the not-defrosting problem. Great solution for a great price.

Want GE WR51X10101 Defrost Heater and Bracket Assembly for Refrigerator Discount?

This came in fast and was exact fit, this update worked out perfect for me and I didn't have to do any real modifications.

Save 61% Off

GE WR04X10168 Badge for Refrigerator

GE WR04X10168 Badge for RefrigeratorPerfect to replace a missing badge. It has an adhesive which you peel and stick on the appliance. Might be nice if you could remove it easier if you put in the wrong place the first time.

The badge came promptly and exactly as described. Much better price than other online stores. Will buy again if needed.

Buy GE WR04X10168 Badge for Refrigerator Now

Monday, April 28, 2014

DA29-00003F Samsung Aqua Pure Plus Refrigerator Filter

DA29-00003F Samsung Aqua Pure Plus Refrigerator Filter
  • Replaces the DA29-00003G, DA29-00003B and DA29-00003A.
  • Tested and certified by NSF International.
  • Genuine Samsung Filter.
  • Recommended usage: replace every six months
  • Uses Activated Carbon Block to remove contaminants

I ordered Samsung DA29-00003G, but received Samsung DA29-00003F instead. It works just as well as my old one (Samsung DA29-00003G), same size, same shape, etc. Very easy to install. No drips, no mess. Just follow the directions! Remember to purge the water dispenser for 5 minutes after installation to remove all air bubbles. Worried about wasting water? Do as I did -water your plants. Will buy again. The only difference that I could notice was that the DA29-00003F has a white cap instead of a red cap.

Buy DA29-00003F Samsung Aqua Pure Plus Refrigerator Filter Now

Most likely, if you're considering this product at all, it's because you have a Samsung refrigerator and the filter status indicator light has turned red after a few month's use. In which case, you may only be looking to verify that this is, in fact, the same filter you can find in your local home improvement store.

The Aqua-Pure Plus refrigerator water filter is exactly as advertised, and I found that the price with shipping included beat out my local store by around $15.

Installation is very simple and described in sufficient detail in the user guide included in the box.

Read Best Reviews of DA29-00003F Samsung Aqua Pure Plus Refrigerator Filter Here

Haven't had to install it yet, but very happy with my savings on this brand name product. Thank you very much!

Want DA29-00003F Samsung Aqua Pure Plus Refrigerator Filter Discount?

I was desperate for a fresh filter so I went ahead and purchased this more expensive item because it appeared to be a genuine Samsung product. The directions said to insert it on the side with no label, there were labels on both sides. Hmmm? I proceeded to try both sides, it would not fit either way. The last generic filter we had in there that worked had to have the notches altered by one of my handy sons, which was the only way it was going in there. I had thought the genuine product would fit right in, but frustratingly so, it did not. The only way it would fit is if I performed a replica of the surgery on the filter as had been previously done. So, go ahead and purchase this one if you have a utility knife, and are able to replicate the notches from the old filter. I do not know why it would not fit, unless it was defective, that possibility comes to mind. Good luck if you purchase this item.

The filter sells at nearly half of the price that you can get it at a store. Shipping was very fast. Will continue to buy these filters through Amazaon.

Wine Enthusiast 18-Bottle Touchscreen Wine Refrigerator (Slimline - 2-Temp)

Wine Enthusiast 18-Bottle Touchscreen Wine Refrigerator
  • Dual Zone for Reds & Whites
  • Silent Cooling Technology
  • Temperature range: 46-66F
  • Touchscreen controls
  • 18 Bottle Capacity

I have another Wine Enthusiast Wine fridge and it is so silent you can't hear it. This one hums so loud you have to turn the TV up in the next room. It's horrible. Don't buy. I'm returning it as soon as I can figure out how to ship it back. I feel like I have the humming tell-tale heart in the other room.

Buy Wine Enthusiast 18-Bottle Touchscreen Wine Refrigerator (Slimline - 2-Temp) Now

I am aware of the number of negative reviews on this and other brands of the same product so the reading was carefully done and it came down to this one after about three days of examining various remarks on different sites. It's not easy picking one because these wine refrigs come across as sensitive and not really durable or built for longevity. Once I subtracted the extraordinary negative reviews for the different brands, which must come from competitors, and try to estimate how many dumbazzes do not treat the appliance properly during set up, then I got the percentage of reviews I needed to determine who prevailed. Cost, design, and features then completed the selection process.

Wine Enthusiast, according to some, cannot be trusted for customer service or quality. Some of the same reasoning, however, can be found for other brands. So, I chose this one based on the design (tall and slim) so it would fit between a basement bookshelf and table, noise (it is very quiet), attractiveness in a living area (black metal with tempered glass front surrounded by stainless steel trim), and cost for the goods received (18 bottles 750ml each storage for Amazon's price proved highly desirable).

Future buyers caveat: DO NOT do anything with it until you read the small manual included which you will find inside the unit. Too many people do not understand the need for the air temp parameters in the room where it will be located, allowing the unit to reach room temp before plugging it in, keeping it upright for at least 2 hours before plugging it in (I let mine sit overnight just to be sure any lubricants in it settled properly), and positioning it where it will get the best ventilation around the the sides and back. This is not a unit to be built in under a cabinet and you have to keep it away from air conditioners or heat sources. There is a statement in the manual that reads "In order to reach the lowest temperature (lower zone), the best ambient temperature will be around 60-65 F". Mine is in the finished basement area where the temp is typically 66 in the winter and might get to 70 in the summer on very hot days.

When you plug it in you should set the temps desired and wait for the two sections to reach those temps before loading in case there might be some type of malfunction. I left mine overnight because after 3 hours it was still adjusting and it was time for lights out. The next morning the two sections were correctly reading my settings. If you have difficulty remembering, recall that HEAT RISES so the top part should hold the reds and be set warmer and the lower will have your whites which will be 8-10 degrees cooler. The design provides different high and low for each section.

I then loaded the wine bottles that had been in the refrigerator (where the interior temp was 40deg) and both sections of the wine refrig dropped a few degrees. About four hours later the sections were reading back to the settings. Remember that these little starter coolers are not for fine expensive wines but are only to allow you to provide your bottle at the proper drinking temperature when the meal is ready...in addition to freeing up all of your refrigerator space if you like to have 10 to 18 bottles on hand of different varietals.

So, after 48 hours I can tell you that everything is mellow and the first bottle from the Slimline was at just the right temp for the Sunday meal. No more fumbling through a lot of bottles on a fridge shelf, estimating when to take the bottle out and leaving it on the table with the hope that it will be at the right temp when the serving plates are passed around.

If there are electronic problems in the near future, i.e. up to one year, I will return and update. WARNING: I thought I would look into Wine Enthusiast's 2,3 and 5 year extended warranty plans considering the problems that these types of appliances have. When I clicked on each one all three stated that due to "overwhelming demand" the plan was no longer available. Something smells about that notice. How does a company "run out" of extended warranties unless they already know that the consumer bought a lemon? At best, they should not have even offered such a plan on their site if they could not deliver. This was something I was unaware of until after delivery and I had to register the unit with the company.

Read Best Reviews of Wine Enthusiast 18-Bottle Touchscreen Wine Refrigerator (Slimline - 2-Temp) Here

The "silent" and "ultra quiet" claims from Wine Enthusiast are completely bogus.

I bought one of these to fit in a smallspace in our living room, but can't use it there because the 'silent' fridge is so loud that it would be very distracting when we are watching TV it's that loud.

Now I have it inside a closet (with the closet door closed) over 50 feet away from the living room and yet we can still occasionally hear it.

BTW, I also contacted WineEnthusiast customer support online, and recieved an email from them promissing a response within 2 working days. That was several weeks ago, and despite several follow-up emails to them I got no response at all (and yes, I checked my spam filters). I finally contacted them by phone and asked why I had recieved no response no explanation given, and no apology for being utterly unresponsive.

Silent my foot... don't believe the hype.

Want Wine Enthusiast 18-Bottle Touchscreen Wine Refrigerator (Slimline - 2-Temp) Discount?

I Purchase this refrigerator is real loud . Is louder than my big refrigerator . If i would know I wouldnt purchase it.

I spent far too many hours researching wine fridges before settling on this one. That said, calling it a "fridge" is a bit inaccurate. These "budget" units use fans and some fancy electrical stuff to create the not-so-low temperatures your wines need for proper storage. They use less electricity than a refrigerator, they are very quiet, and they don't get down to freezing temperatures.

Unlike many, however, this cooler DOES get cold enough for proper white wine storage (I have it set to 46 degrees). The dual zone function is awesome (I have my reds at 55). You get nine bottles per zone. It's very attractive, 100% silent (folks saying theirs isn't have defective units and should return), and works great. If you're on the fence, make the leap; this has taken our wine consumption to new levels (quality, not quantity).

My only complaint would be that the wire racks are a bit flimsy and the storage space is very tight, which means you won't be able to fit 18 bottles if you have anything even a little bit oversized (champagne).

Save your time and rely on my research. This is an outstanding product.

UPDATE: Dropped down to 3-stars. After a few weeks of use (no changes in the product's environment), the unit is unable to hold the correct temperature for reds. It's still rocking for my whites, but it's too cold for reds (set to 55, but it won't go above 51). Could be worse, but worth mentioning.

Whirlpool Washing Machine / Washer Door Seal 8182119

Whirlpool Washing Machine / Washer Door Seal 8182119
  • THIS WHIRLPOOL 8182119 FRONT BELLOW SEAL FITS MANY WHIRLPOOL, MAYTAG, KITCHENAID AND KENMORE
  • WASHING MACHINES.
  • GREY BELLOW SEAL
  • Works with the following models: Whirlpool 7MGHW9150PW0, Whirlpool 7MGHW9400PW0
  • Whirlpool GHW9100LQ2, Whirlpool GHW9100LW2, Whirlpool GHW9150PW0, Whirlpool GHW9150PW1

I purchased my Whirlpool duet front-loading washer (model# GHW9250MW1) back in June of 2004. I recently noticed a number of holes in the washers door seal. After doing a lot of research I decided to take on the project myself instead of paying for a service call. The price I paid on Amazon was by far the cheapest I could find and it was a genuine Whirlpool part. Of course the information I collected in regards to installing the baffle made it look a little easier than it actually was but after all was said and done it took me just under 45 minutes and that included extra cleaning while the machine was apart. The best reference I can suggest is a YouTube video "Duet/HE3 Washer Door Boot Seal Replacement (part #8182119)". It steps you through the process with the basics. I would strongly recommend this product and I had no issues with the seller at all.

Buy Whirlpool Washing Machine / Washer Door Seal 8182119 Now

My Whirlpool Duet had leaked intermittently for quite a while. Had a service guy out to look at it, and he couldn't find anything wrong with it. He mentioned that maybe the bellows had a tear in it somewhere that he (or I) couldn't find, and he would get me a price to replace it. The next day he called me back with a $375 price tag. Needless to say I skipped it. One day I came down and there were suds all over the floorthis time the bellows had a huge tear in it. I called a local parts place$130 for the part. Got it here for a little over half that, plus I got it in less than a week. Took about an hour to replace it and it has not leaked since. I checked all over the internet and this was the best price anywhere.

Read Best Reviews of Whirlpool Washing Machine / Washer Door Seal 8182119 Here

This was the fix to my problem. The door seal on our washer completely corroded through ending up with a hole in the bottom, thus water leaking everywhere. I ordered this door seal to replace it, and it was the perfect match, and it was shipped quickly! Now I'm waiting for the arrival of a new water inlet valve to stop the water leak that probably caused the first door seal to corrode. :)

Want Whirlpool Washing Machine / Washer Door Seal 8182119 Discount?

This part was easy to install after reviewing the YouTube training videos twice. Much cheaper than calling the repair man.

Save 65% Off

I bought this item from Amazon after shopping around because it was the cheapest price I found. I did this repair by myself with a torx screwdriver and a ratchet set and had no problems. You can easily find videos and guides for this repair on the web that make it painless. The actual replacement part fit perfectly and has not had any leaks in the weeks that it has been in place.

Green Filter for Samsung DA61-00159A-B NSF Certified Refrigerator Water Filte...

Green Filter for Samsung DA61-00159A-B NSF Certified Refrigerator Water Filte...I am really liking the green filter. It connects to the input on the fridge easily, isn't any more or less heavy, is the same size as the oem model from samsung, but the bonus is the recyclability! The oem filters have to be thrown in the trash instead of recycled...it's a large item! So happy this can go in my blue bin in 6 months.

Frigidaire Refrigerator Water Actuator Arm 241685703

Frigidaire Refrigerator Water Actuator Arm 241685703
  • THIS FRIGIDAIRE 241685703 WATER ACTUATOR WORKS WITH MANY FRIGIDAIRE, ELECTROLUX AND KENMORE
  • REFRIGERATORS
  • Works with the following models: Frigidaire FLSC238DB4, Frigidaire FLSC238DS8
  • Frigidaire FLSC238JS0, Frigidaire FLSC238JS1, Frigidaire FLSC238JS2, Frigidaire FRS6L9EFSS4

This is a substitute replacement for my Kenmore refrigerator actuator arm. Sears price was $87, but I got it from Amazon for $40. It fit perfectly and I received it in about three days from ordering. I dreaded installing it because it looked like I would have to tear into the water dispenser. My concern, what if I dismantled the dispenser, couldn't put it back together and then had to call Sears?! So, I gave it a try.

I removed the drip tray but there were no screws at the bottom of the module cover like the instructions indicated. I had to carefully pry out the bottom of the cover, then push down from the top and the cover popped off, no problem. One issue, the cover was still attached to the dispenser module by a ribbon cord. I couldn't figure out how to detach it so I left it on. The cover just dangled while unscrewed the three screws at the top of the module. I carefully wiggled out the module and pulled out the water tube. Then the module pulled out further so I could work on it.

I detached the red/black wire plug and had to cut it because it ran behind a little box. I unscrewed two small screws holding the broken actuator arm side prongs and then removed the broken arm. There was a spring arm that I had to make sure was in front of the actuator arm front prong. It allows the actuator arm to spring back so it's not constantly turning on the water. It was an easy thing to do.

Placing the water tube back in the water tube hole in the dispenser seemed impossible. I struggled with it for awhile then realized it would naturally go back into place as I screwed the module back on the refrigerator. It turned out to be simple once I realized the tube would just go back in place. I checked the water dispenser hole once I put in all the screws and I could see the tube was good to go.

The entire job was easy. It probably took me longer than most folks because I was very cautious and fooled around with the water tube way too long before figuring it out.

Easy job, saved me hundreds by doing it myself. To have a repairman come to the house would have been $100 just for the person to get to the house. Then if anything needed to be done, that would have been lots more.

Buy Frigidaire Refrigerator Water Actuator Arm 241685703 Now

This was an exact replica of the actuator arm I got quotes from Sears and other appliance stores nearby at more than double the amount. It did take me about an hr to figure out how to remove a few things around to install it but once I did, it felt good knowing I saved about $250 which is what some appliance techs wanted to charge me.

Read Best Reviews of Frigidaire Refrigerator Water Actuator Arm 241685703 Here

fits perfectly. found instructions for repair on youtube. it took about 20 minutes start to end to fix the dispenser

Want Frigidaire Refrigerator Water Actuator Arm 241685703 Discount?

Quick shipping and perfect fit. Unfortunately, the fridge install was a bit more complicated than initially thought but the part was perfect and everything works just fine.

This item is super tricky to install. I'm slightly above average when it comes to home improvements. Found a you tube video that make it pretty simple. Just a lot of steps and probably took me 1 hour from start to finish.

Sunday, April 27, 2014

Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel

Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel
  • Freestanding 45-bottle wine chiller with sliding wood shelves
  • Front-venting design allows for building in under a counter
  • Dual-zones for red and white wines; 2 separate controls
  • Thermal-glass door can be locked; digital display; interior light
  • Measures 23 by 24 by 34-1/2 inches; 1-year limited warranty

We paid for and expected a high-end dual zone wine refrigerator. That's what we thought we had when I installed it. The appearance is indeed nice. However, there are two problems. 1) Spacing is tight between the drawers. Some common size wine bottles cause the drawers to hang up. And, the tops of the bottles on the lower rack get hooked on the lower drawer, so opening the lower drawer pulls them out onto the floor. 2) After giving the unit two weeks to stabilize, we found that the red wine and white wine zones can't reach their warmer and cooler settings unless the settings are only a few degrees apart. There is an opening between the compartments. Cold from the white wine section (they set it up so the cooler temp rack is on top) spills to the lower section making the reds way to cold (or the whites to warm, if you change adjustment ranges). With the red zone set to 65 and the white zone to 45, the actual stabilized temperatures indicated on the read outs are 53 and 48. That's not much better than having all the wines in one refrigerator.

Buy Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel Now

I concur with the previous review can't fit any slightly non-standard wine bottle, catches on other drawers, but most temperature. Somebody was not thinking when the put the hot under the cold and the cold above the hot. First can't meet the temperature you want, but completely illogical and wasteful of electricity. Unfortunately looking difficult to return as we ordered in Nov, but did not actually get installed until Feb.

And Vinotemp's customer service is absolutely non-existent, not returning any emails. Hence this review. Will probably think about reporting to those who give out "EnergyStar" awards. Suggest another category, "EnergyHogs" ok I'm an electrical/physics type and so the above infuriates me as this type of engineering is plain bad!!

So how do I really feel?

Read Best Reviews of Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel Here

I purchased this product for installation under a coffee / wine bar in our lake home. It is a very nice looking unit, but I cannot recommend purchase.

First, this box lasted only 3 years, and then simply quit. I took it into a qualified repair shop who diagnosed the problem as being a defective control board. Read a little on the web about Vinotemp, and you will see I am not alone with this problem. The part is advertised on their website for $47, plus $10 shipping, but no parts are available I have been out of commission since the end of August, and today's new forecast for parts availability is "3-4 more weeks." My repair man and I have both been in contact with Vinotemp, but nothing specific can be said when I will have my replacement part and my unit back to duty.

When it did work, temperature fluctuations ran 5 degrees or so over or under the desired setting. This may bother some people, but for me and the "mid-range" wine I stock, no big deal.

Far more disappointing is the seeming poor product quality, and the proven poor quality parts support.

To do over, I would buy a free-standing (versus built in, which is front venting) unit, as there are many on the market at far more attractive price points.

I'd recommend getting a different brand name.

Want Vinotemp VT-45 Dual-Zone 45-Bottle Front-Venting Wine Chiller, Stainless Steel Discount?

We have had this wine cellar installed for 2 months now and have been impressed with its performance. The temperature control works great on the unit we have and chills and keeps its temperature gradient as programmed. As would be expected, temperature is much more stable as the quantity of bottles increases in the fridge. The only complaint is the spacing between the shelves. The proximity of the draws on top of one another does not allow any larger than normal diameter bottles to fit without interfering with other shelves. I should mention that the display shelf will only accommodate bottles that are slightly shorter but not to much wider than average. Of 12 different bottles we tried, only one fit, while still allowing the shelf directly above to open.

Overall, great fridge, it looks fantastic and keeps our wine stored at the proper temperature.

This cellar is a great size and with the stainless steel front and wood at the front of the shelves, it looks great built in to my pantry. Obtained this cooler about a year ago and it looks great. As to the other reviews complaining about the cellar design being poor with the colder section for whites on the top and reds on the bottom, I think they're misthinking. Although you can't have a HUGE temperature span between the two sections, I don't find that I want that for storing my wines and I assume it was designed this way because it takes less energy to keep a small compartment cold than a large compartment. Sort of like having the little freezer at the top of your refrigerator maybe? It definitely has been maintaining my desired temperatures properly. Anyway, I think the display shelves are handy and this Vinotemp looks great! Definitely wasn't disappointed and don't think you will be either.

Haier HBCN05FVS 150-Can Beverage Center

Haier HBCN05FVS 150-Can Beverage Center
  • Beverage center for chilling and storing up to 150 12-ounce cans
  • 4 full-width adjustable vinyl-coated shelves hold both cans and bottles
  • Adjustable thermostat; reversible glass door with recessed handle
  • Removable lower bottle rack; automatic defrost; lock and key for optional security
  • Measures 21-1/4 by 20-1/2 by 31-3/8 inches

My beverage center arrived quickly and we were quite eager to get it up and running as my husband always takes too much space in the fridge with his bottled water, soda pop and beer. Just as advertised, it holds a lot of stuff!

The honeymoon ended quickly though, when we found that we could not get the temp to go below 49 degrees, which is pretty tepid for any cold beverage and absolutely unacceptable for beer. We tried everything, reread instructions, etc. You can only set it on a dial, there no indication of what the temp actually is...so we bought a thermometer and got the bad news that despite being on the coldest setting possible, we weren't getting below 49-50, which according to the thermometer we bought is actually in the "danger" zone of letting bacteria breed.

So, we call the manufacturer who says that we should have know it is a "cooler" not a fridge and will only keep beverages 20 degrees cooler than the ambient temp in the house. What a crock!!!!!!

So, we're stuck with a piece of equip that barely cools things down.

I suggest anyone interested in purchasing these things, now matter the price, be well informed between the differences of cooler and refrigerator. I have learned an expensive lesson.

Buy Haier HBCN05FVS 150-Can Beverage Center Now

This thing broke in 9 months. Never really got drinks cold anyway. More of a "chiller" than refrigerator. Get something else.

Read Best Reviews of Haier HBCN05FVS 150-Can Beverage Center Here

Reading all the other reviews of this product......you have to blame the error of the customers and not the product itself.

If you have ever owned a Wine Fridge.....you know it is NOT a refrigerator....that is not its purpose. If the other reviewers wanted a beverage holder that was able to keep food in it or keep beverages below 40degrees....then they should have gotten a REFRIGERATOR...not a wine fridge/chiller.

So knowing that....let us give an honest and realistic review of this item based on what it was actually designed for.

This unit while not the highest frills of wine chillers is attractive with a stainless steel trim on the door and a glass front and a black body. The door is reversible and it has an internal blue LED interior light you can turn on/off depending on your mood. It does not have a Temperature indicator with a simple dial for temperature with MIN to MAX indicators. It is simple and attractive.....and given its price....thats to be expected. I purchased a suction cup thermometer that faces out and mounts to the interior of the glass door for like 2$.

It comes with 4 adjustable racks and the nice bonus of a bottom storage area rack that has not been present in other wine chillers I have purchased. It allows you to stack cans on the bottom on their side so they don't roll out.

My unit is new and I purchased it as it is replacing an old Urbina thermoelectric wine chiller that finally crapped out after 2.5 years (It was dirt cheap so no big whoop). We will see if this unit is the exception.

Lets be honest......these units don't tend to last more than 3 years on average so if you are worried about that a higher end unit may be to your liking....but you will pay a pricey premium for actual fridge-like beverage centers like GE's.....or just invest in a long extended warranty so you can be re-imbursed should it fail within 3 years (this is what I did).

This unit unlike my old model has an actual compressor and sealed coolant system which is a luxury at this price range....usually you are getting a thermo-electric cooling system at prices below 200$.

I will update my review in the coming months but so far my unit on MAX is cooling better than expected with an average of 33F below room temp:

(Current Results = Room Temp 75F / Cooler Temp 42F )

* NOTE: Cooler is in a shaded corner away from direct sunlight...and this is also one of the 'newer' models in stores now.

Hopefully this informed and realistic review will help others. This is good unit for the price if you want a beverage chiller. It is similar to units they use at bars and convenience stores on or near the counter. Your beverages will be chilled but they will not be ice cold. Your white wine will be in the perfect temperature range (depending on the temp of your home or room)......which is exactly what this unit was designed for.

Want Haier HBCN05FVS 150-Can Beverage Center Discount?

The fridge looks great, would be a perfect for beer, and I thought would be perfect for my bar. Only problem is that it is junk. It does not get cold whatsoever. Might as well stick your beer outside at night to get it cooler. Do not buy unless you know how to rig the thermostat.

Save 41% Off

Having read the reviews about the lowest temperature this gets to, I was skeptical, but decided to buy this one anyway. Mostly because of the price and the fact that it fit almost perfectly in the space where the old one was.

Although this is NOT meant for built in spaces, I had a planned workaround. Anyway, my first tests were with the fridge in the middle of an 80F room with plenty of air circulation and no direct sun. Note that this unit does not have a condenser fan (the fan on the back of most larger refrigerators). Instead, the coils are behind the side panels, so they do get very warm. Anyway, because there is no fan, you should not use it built in.

So how did it do? I used a temperature logging device with my laptop and a power meter. On the maximum setting, it cycles on for 30-45 minutes and then off for about 30 minutes. It uses about 80 watts when on (0 watts when off, unless you have the LED's on so maybe a watt) and the temperature ranged from 35F to 45F with a median temperature of 41 (that's what a can of beer or soda would be at any given time because of its thermal mass).

80 watts seemed like a lot of energy for such a small unit, but since Amazon doesn't provide energy data for these, there's no way to compare.

Just for grins, I tried putting the unit in the cabinets (with 1/2" side clearance, 2" on top and 4" in the back) with no modifications. While it did cool about as well as in the open, it ran almost continuously, turning off only for about 5 minutes every 2 hours. That would be a huge energy hog so what I did was put a ~5" diameter muffin fan in the side of the cabinet such that it drew cool air from an adjacent area (the drawer section) and exhausted it into the area where the fridge is. Since the only openings were towards the front, that gave good circulation all around. I had an old Sears Craftsman power switch that I wasn't using (the kind normally used to turn on an accessory when a tool is turned on) that now turns the fan on whenever it senses the fridge is running. The added fan draws 10 watts, but it keeps the fridge from running constantly so it will save electricity. In fact, it may actually may run less than when it was in the open because of the added air circulation.

I find the unit is quiet (sorry don't have a decibel meter), but it is in the family room where the TV is and is not objectionable. Even when it was out in the open and not in the cabinet, it wasn't too loud.

I wish it was more energy efficient, but considering the price it is a good buy.

UPDATE 8-9-12:

I found that having the blue LED lights on affects the temperature inside. That's because the power supply for the LED is in a section of the housing where the thermostat is. If you have the lights on all the time, they generate a small amount of heat which makes the thermostat think the whole fridge is warmer. Thus it will run longer and get the inside about 5 degrees colder. This could explain why some people say the temperature inside is too warm. If you want to get it colder, try turning ON the blue LEDs!

I lowered my initial rating from 4 to 3 stars because of poor Haier customer service. I needed to get a new plastic plug that covers the hole in the door left from reversing the hinges (it was jammed in so tight and it is soft plastic so it got mashed up when I tried to remove it). The manufacturer basically said too bad, you have to buy a new one! This is for a part that couldn't cost more than a quarter.

Maytag UKF8001AXX PuriClean II Refrigerator Cyst Reducing Water Filter, 1-Pack (Discontinued by MFG

Maytag UKF8001AXX PuriClean II Refrigerator Cyst Reducing Water Filter, 1-PackYou gotta hand it to Maytag they made replacing the water filter very simple. Took all of about 30 seconds from start to finish. And about 20 seconds of that was wiping up the water that dripped out of the old filter when I pulled it out, so the next change should go even better ;-)

We have a family of six and we drink water almost exclusively, so I went ahead and changed the filter at six months just like the owner's guide recommended. However, I could see no evidence that the filter was near its end of life and am convinced that I can get more use out of the filters than the suggested six months. I will try to keep an eye on things, but without a little window I really have no way other than flow to know what is going on.

And that is why I gave this a rating of four stars. The filter seems to work wonderfully and replacement is a breeze, but I would be happier if I could look at the state of the filter while it is in use.

My Ice Cube make was having major problems. Ice Cubes were hollow and Ice was sticking on the White Prongs that pop the cubes out. I called Amana and they were no help so I figured that the Cube maker was not getting enough water flow.

I replaced with this filter and now the Ice Cube maker is like new and the water shoots out of the dispenser like crazy. What used to take 25-30 seconds to fill a glass of water now takes 3-5 seconds.

So if you are having Ice Cube issues or poor water flow buy this.

It's a little expensive for a water filter but it's worth it.

Oh and the water tastes good too.

Buy Maytag UKF8001AXX PuriClean II Refrigerator Cyst Reducing Water Filter, 1-Pack (Discontinued by MFG Now

Fast delivery of an important feature of the family refrigerator. This is a water filter that screens particles and odors out of chilled water dispenser. It is sturdy, easy to install and very reliable. Buy it, you'll be satisfied.

Frigidaire/Kenmore PureSourcePlus Ice & Water Filter (WFCB, 46-9906)

Read Best Reviews of Maytag UKF8001AXX PuriClean II Refrigerator Cyst Reducing Water Filter, 1-Pack (Discontinued by MFG Here

This product is the same as the original and I think it works fine for me and my family.

Want Maytag UKF8001AXX PuriClean II Refrigerator Cyst Reducing Water Filter, 1-Pack (Discontinued by MFG Discount?

This is a very expensive item for what you get, and it certainly doesn't last as long as they say it does. The taste of your water coming through this filter is great for the first month or so, but then the quality drops noticeably quick.

I think the price of this item is unfairly high, but once you buy a refrigerator that needs them, you're stuck. You either buy the filter or put up with nasty tasting water from your refrigerator spigot.

A good rule of thumb, if you're buying one filter, better buy two, because you'll need a new one quicker than you think.

Save 7% Off

GE : IM4A Ice Maker Kit

GE : IM4A Ice Maker KitI ordered this unit to put in a GE refrigerator that did not contain an ice maker. The installation was not very difficult. It took me an hour or so to install (I was not rushing). It has been working great. It makes a great amount of ice in a short time. I am very happy with my purchase.

I ordered this model because it was the one listed in the Owner's Manual. lt turns out you can use the newer model (IM6, I believe) but it may or may not have some design/manufacturing flaws depending on what you read. Either way the unit works great and was easy to install. All of the parts I needed were included (even a few that I didn't need because they came with our refrigerator).

The only complaint I have is probably more a design flaw: the ice tends to overfill the bucket until it overflows. It could be an install error on my part I suppose but there isn't too much room for error.

Buy GE : IM4A Ice Maker Kit Now

Easy to installbegan making ice within 24 hours. Takes up a lot of freezer space though, so keep that in mind...

Read Best Reviews of GE : IM4A Ice Maker Kit Here

This is a great product that's going to sve the hassle of always having to refill those silly ice cube trays! Thanks amazon.

Want GE : IM4A Ice Maker Kit Discount?

When I first ordered this, I called GE because the directions weren't clear (they say to find a letter decal on the back of the fridge; we didn't have one). GE said this ice maker wouldn't work with my fridge. I called the manufacturer of the fridge and they said this ice maker wouldn't work. I ordered one from them. Thank goodness I hadn't returned this yet. That company sent me a used, broken ice maker...the same model as this! I returned the broken used one, which cost twice as much as the unit from Amazon, plus the unit from Amazon is complete with ALL necessary parts. I did have to call a handy man to install because of the directions issue. Maybe someone handy wouldn't need to. This ice maker is working perfectly! I definitely recommend this item.

Save 16% Off

Saturday, April 26, 2014

Whirlpool Part Number 2220457: COUPLING, UPPER

Whirlpool Part Number 2220457: COUPLING, UPPER
  • THIS WHIRLPOOL 2220457 ICE BIN COUPLING WORKS WITH MANY WHIRLPOOL, KITCHENAID AND KENMORE
  • REFRIGERATOR/FREEZERS.
  • Works with the following models: Maytag 10654782803, Maytag 10654783803, Maytag 10654784803
  • Maytag 10654792803, Maytag 10654793803, Whirlpool 7GF6NFEXTY00, Whirlpool 7GS2SHAXMS00

This worked perfectly to fix our ice maker. Arrived quickly. Easy to install with removal of just a few screws.

Buy Whirlpool Part Number 2220457: COUPLING, UPPER Now

I have crushed ice every morning with my coffee, down for a week and back in business. Thanks again Amazon, simple repairs made simpler when the part is so easy to locate.

Read Best Reviews of Whirlpool Part Number 2220457: COUPLING, UPPER Here

The part was just what we needed to fix our ice machine. It came very quickly. Price was right and shipper shipped quickly.

Want Whirlpool Part Number 2220457: COUPLING, UPPER Discount?

I love crushed Ice. After about 10 years this fitting exploded on my Kitchenaid Refrigerator/Freezers Ice Maker. I got this replacement cheap and fast and I'm back in business. It's been in about a month now and seems to be working fine.

Not much to say -it's the correct replacement part for certain Whirlpool and Kenmore brand refrigerators made by Whirlpool. The original part broke on my Kenmore, I got this one to replace it, and now my ice dispenser works again.

KitchenAid 21.9 Cu. Ft. Stainless Stee Bottom Freezer Refrigerator - KBRS22KWMS

KitchenAid 21.9 Cu. Ft. Stainless Stee Bottom Freezer Refrigerator - KBRS22KWMS
  • KitchenAid
  • KitchenAid Architect Series II KBRS22KWMS 219 cu ft BottomFreezer Refrigerator with SpillClean Glass Shelves FreshSeal HumidityControlled Crispers Max Cool and Digital Controls Monochromatic Stainless Steel and Right Hinge Door Swingreplacement for KBRS22KTSS
  • KBRS22KWMS
  • Kitchen Aid - KBRS22KWMS

We replaced our old side by side with this Stainless KitchenAid single door bottom freezer. I did not want ice maker or water either in the door or inside the fridge. I read tons of reviews and the consistent complaint seems to be that ice makers break and they take up space. Finding a fridge with no ice maker or water was a challenge despite the fact the every sales person I met said they get frequent requests for fridges without ice maker.

Regarding single door, I decided against French Door (read complaints about them not closing properly), most side by sides had water in door. I looked at higher end brands but this KitchenAid fit the bill and we love the bottom freezer. A family probably would require more capacity but this is perfect for the two of us. I love the door storage which holds a gallon of milk. It is quiet and so far no complaints (3 months in!). We also got a KitchenAid dishwasher with same style handle to match.

Only improvement would be to have a place in door for wine bottles. Also would prefer something closer to counter depth (for aesthetics only). Otherwise love it and it Looks great!

Buy KitchenAid 21.9 Cu. Ft. Stainless Stee Bottom Freezer Refrigerator - KBRS22KWMS Now

The computer board broke and I was told by the repairman that this model will 95% of the time have this problem after about 6 yrs of use. They don't have a new part available; they have to 'repair' the broken board. It has been 3 weeks and the part has yet to materialize. Am very disappointed that Kitchen Aid is apparently aware of this inherent flaw in the product and hasn't issued a recall, or at least have the part available so it can be fixed quickly.

I have 2 of these, side by side in my kitchen and am told the other one will also fail at some point.

Shame on Kitchen Aid, and word to the wise, don't buy this product!

Sanyo BC1206 Kegerator Beer Cooler

Sanyo BC1206 Kegerator Beer Cooler
  • Cooler with 6-1/2-cubic-foot capacity; holds up to 1/2 keg
  • CO2 tap system with Sankey keg tapper, pressure gauge, regulator, and draft arm
  • Black exterior with 4 casters for portability
  • Includes cleaning kit and beer FAQ guide
  • Measures 23-5/8 by 37 by 25 inches

I chose the Sanyo because I heard the Haier model has problems getting down below 40 degrees. This one has no problems keeping a half barrel ice cold. This is a great looking keg cooler that comes with pretty much eveything you need. The only cons are the vinyl tube clips are cheap plastic that don't get tight enough, and the drip tray is also a cheap plastic tray. I immediately replaced these with metal and just bought a double regulator (it comes with a good Taprite single regulator) so I can gauge the remaining CO2 in the tank.

Free shipping saved about $140!

Buy Sanyo BC1206 Kegerator Beer Cooler Now

The Sanyo Beer Cooler really has no competition in it's price range, so they were apparently able to cut corners during manufacturing. First let me say that it dispenses draft beer, so it'll pay for itself in about 6 kegs.

But here are my complaints with it: 1. The door doesn't close perfectly, there's never a tight seal even after trying to clean the gaskets. Which may lead to 2. It doesn't get cold enough. I like my beer somewhat warm, so i't not a huge deal for me, but not everyone does and this can't get cold without leading to problem 3. The inside-back of the fridge FREEZES up. Without a keg in it (or I use soda kegs sometimes) the ice block gets so big there's no way to get a full-size keg in. If you leave a keg in there long enough, the ice will actually form over the keg so you need to break it off to remove keg. It's a pain.

So why did I give it 4 stars? Because there's nothing else I can recommend for the same price. And you get fresh DRAFT beer at 1/2 the price of canned or bottled and don't have to worry about recycling or going to the liquor store every weekend.

Read Best Reviews of Sanyo BC1206 Kegerator Beer Cooler Here

This Sanyo kegerator is a great little fridge. It has the capacity for a 1/2 barrel keg with the include 5# CO2 cylinder inside if you want to get a keg from your local liquor store, or you can use it for 5 gal corny kegs filled with homebrew. You can fit two standard corny kegs side by side in the fridge with the CO2 bottle. There is floorspace for 4 corny kegs or 3 & the CO2 bottle, but the top of the fridge in the back dips down about an inch too low to fit a corny keg under it. Easiest solution is to chop off half of the rubber handle on the corny keg and you can fit in two front to back with a full 6 gal carboy & airlock next to them or another corny keg. It works great for lagering and is a pretty good unit overall. The CO2 regulator that is included is single gauge (dispense pressure) but a second gauge for CO2 bottle pressure can easily be attached.

Want Sanyo BC1206 Kegerator Beer Cooler Discount?

it is a good beer dispenser, very cold beer, nice looking unit. most of the parts are good quality. had the haier(spelling issue) unit before, always had problems. this sanyo, so far, has exceeded the expectations. the larger cooling panel is very helpful and needed. the only complaint I have is the shipping. unit arrived very beat up and battered. not sanyo nor amazon's fault, just a common problem with anything shipped UPS. will attempt to get a resolution to that in the comming days. I will keep you posted. other very minor complaints, screw holes are not lined up well at all. you will be best advised to tap your own holes before screwing anything down. instructions are rather poor. if you don't already know about kegorators you will not know how to run this, research co2 adjustments and pressures first. the castors on the bottom should be locking. easy enough replacement if you have any handyman ability. but manufacturer should have thought about that first. and as you've read in other reviews, the drip pan is extremely half arsed and cheap.

amazon continues to be the best place on line to buy at the best price. i looked for this product at the best price for a while. when amazon finally put it online i jumped on it. as compaired to other purchases and the speed of delivery this is last. it took three business days for it to be shipped and i ended up driving 50 miles to the shipper to pick it up. all in all it was worth the kegerator.

amazon don't use eagle USA, they smear your reputation!